06-11-2008
the tape unit mst be installed into the kernel and recogniced like a tape unit, maybe you scsi id isn't right, good luck
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi. I have been having problems with restoring from a tape backup. I use the following cpio command:
find / -print | cpio -ouvB > /dev/rStp0
After running this cpio command, the screen will display all files, but when I try to read or restore the tape I get the following error:
Tape input... (1 Reply)
Discussion started by: cstovall
1 Replies
2. Filesystems, Disks and Memory
I have been restoring from tape some old data. I have done quite a few tapes and have had no problems until now.
The command I am running is "dd if=/dev/rmt/1hbn bs=1024 | tar -pBxF - ".
This is the second tape have have come up with the error "Not enough space". This tape has a couple of... (1 Reply)
Discussion started by: mtoombs
1 Replies
3. HP-UX
I am trying to do a restore on a backup tape (DDS2) and am having a little trouble. For one, I dont know how the tape was made, whether is was tar, cpio, dump..etc. Anyone know how to restore a tape without knowing the format of the backup? (5 Replies)
Discussion started by: bake255
5 Replies
4. AIX
Hello everyone
I have a tape with some information that I got
to restore, the tape was made with the fbackup
command in a hp box.
My question is that I have to restore in a Ibm
box, how can I do this ?
Thanks in advance (1 Reply)
Discussion started by: lo-lp-kl
1 Replies
5. SCO
Here is the scenario. We have an billing system that ran on SCO 5.0.6. The HP Netserver went dwon, along with SCSI disks. They are unretrievable. I installed an IDE HDD, and reinstalled SCO. I am not too familiar w/ SCO or UNIX, and need to know how to install Tape drive, and how to restore from... (11 Replies)
Discussion started by: jlewis808
11 Replies
6. Solaris
I have a T2000 server that is JumpStarted with Solaris 10 from the JumpStart server. Host name and IP address is changed after that. Then we backup the server using FLAR to tape:
root.damas# date; flarcreate -c -t -n "Sol10_cairo_image" -a "engineering@starsolutions.com" -R / /dev/rmt/0n ;... (2 Replies)
Discussion started by: StarSol
2 Replies
7. SCO
Looking for specifically naming convention for a tape device for SCO Unix
What full system backup command should I use for SCO UNIX (1 Reply)
Discussion started by: jedimaster
1 Replies
8. Solaris
Hope someone can help me here...
I've got to restore an E450 with 300MHz cpus which was running Solaris 2.6 from tape. Regrettably the boot drive has failed.
I've access to the first release of Solaris 2.6 CD's and to a set of Solaris 9 CD's.
I remember that different E450 CPUs needed different... (1 Reply)
Discussion started by: pamplemousse
1 Replies
9. SCO
Hello folks. I have the following problem:
I'm trying to create a tape backup of a list of files on a 10 year old server, running SCO Openserver 5.0.5 (the tape drive is a Seagate STD224000N, connected as a SCSI drive).
I then want to restore the contents of this tape onto a new server... (6 Replies)
Discussion started by: klabelkholosh
6 Replies
10. Emergency UNIX and Linux Support
Hi
I recently deleted my /etc but I had a backup on tape. I was able to boot the server with a cd-rom and mounted the /c1t0d0s0 which is where the root directory resides. However when I tried to restore the backup with tar xvf /dev/rmt/0n I wasn't successful even though I was able to use the tar... (2 Replies)
Discussion started by: rahmantanko
2 Replies
st(1M) st(1M)
NAME
st - shared tape administration
SYNOPSIS
device_file
DESCRIPTION
The command provides users with a command-line interface to check the status of a shared tape device or to reclaim a shared tape device
from a host system that has failed while holding a reservation on the shared tape device. The command can also be used for the same pur-
pose on shared library robotic devices. To use the command you must have root user id.
Please see examples below for usage.
Options
recognizes the following options and arguments:
Specifies the tape device file or sctl/esctl pass-through device
file for the shared tape/library device. This parameter is mandatory and will report an error if device_file is omitted.
Allows the user to reclaim a shared tape device or shared
library robotic device in the case where a host failed while holding a reservation on the shared device. This option causes
a bus device reset to be issued to the device specified by the option.
Prints out the current status of the shared tape/library
device specified by the option.
RETURN VALUE
returns 0 upon successful completion and 1 otherwise.
EXAMPLES
The following shows three examples of output from the above command.
The above output indicates that the shared device is reserved by another host and is therefore unavailable at this time.
The above output indicates that the shared device is not ready for use at this time.
The above output indicates that the shared device is ready for use at this time.
To reclaim a shared tape/library device from a failed host, the following command can be used:
WARNINGS
The option must be used with care. When reclaiming devices, it must be ensured that the host from which the device is being reclaimed has
in fact failed, as data may be lost as the result of reclaiming a device that is currently in use by another host.
AUTHOR
was developed by Hewlett-Packard.
SEE ALSO
mt(1), scsi(7), scsi_ctl(7).
st(1M)