Hi All,
I'm doing one script on Juniper router where you have one FreeBSD Shell:
Is pinging from time to time one ethernet port of othere router and in case of fail is blocking one port entering in CLI and doing some command:
If I run this script all is working perfectly, but if I run in Backgroung using "&" is blocked on ping (ping -c1 $RemoteIPAddress) . Could you help me to solve this problem?
Many thanks
giancarlo
Code:
#!/bin/sh
# Name of Script that will be show in log file ##############################################################
ScriptName='CheckLinkScript_Ze2-NS2'
# Remote Interface IP Address ##############################################################
RemoteIPAddress="10.15.100.222"
# Local Port connected to Remote IP Address ##############################################################
LocalPort="fe-2/0/1.23"
# Variable used for show time on log file ##############################################################
RIGHT_NOW=$(date +"%x %r %Z")
# Time between ping to Remote IP Address ##############################################################
SleepingTime='3'
# When interface is down after RentryTime will be sut up and Attemp of ping will be performed ##############
RetryTime='1000'
subping ()
{
echo ---$RIGHT_NOW---$ScriptName---- PERFORMING LINK CHECK RemoteIP $RemoteIPAddress LocalPort $LocalPort -- >> /var/log/messages
ping -c1 $RemoteIPAddress
if [ $? -ne 0 ]
# when is down #################################################################################################### ##
then
echo ---$RIGHT_NOW---$ScriptName---- Remote IP address $RemoteIPAddress unreachable -- > /var/log/messages
echo ---$RIGHT_NOW---$ScriptName---- Shutting down port &LocalPort -- > /var/log/messages
cli <<END_SCRIPT
edit
set interfaces $LocalPort disable
# shut interface ####################################################################################################
commit
top
exit
exit
echo ---$RIGHT_NOW---$ScriptName---- Port &LocalPort Admin DOWN -- > /var/log/messages
END_SCRIPT
sleep $RetryTime
# after sleep try to put up interface and try again to ping ##########################################################
echo ---$RIGHT_NOW---$ScriptName---- Attempt to recover link on port &LocalPort -- > /var/log/messages
cli <<END_SCRIPT
edit
dele interfaces $LocalPort disable
commit
top
exit
exit
END_SCRIPT
# when is up #################################################################################################### #####
else
echo ---$RIGHT_NOW---$ScriptName---- LINK CHECK Performed RemoteIP $RemoteIPAddress : OK -- > /var/log/messages
fi
}
while [ true ]
do
subping
sleep $SleepingTime
done
Hello all,
How do I start a background process and save the process id to a file on my system. For example %wait 5 & will execute and print the process id. I can't figure out how to get it to a file. I've tried: > filename 0>filename 1>filename.
Any assistance is most appreciated.
Thanks,
Jim... (10 Replies)
Hello All,
I am a newbie in Shell script programming, and maybe you can help me with my query.
I need to write a shell script (mntServer.ksh) that will start a background process and also to be able to run another script.
The mntServer.ksh script contains:
#!/bin/ksh... (1 Reply)
hey all,
i am working on sun solaris machine and i want to start a process in background using shell script (actually i wanna start tomcat server using shell script). please dont tell me that append a & at last because this is not working in the shell script. i have also used nohup and... (8 Replies)
Hi All,
I'm doing one script on Juniper router where you have one FreeBSD Shell:
Is pinging from time to time one ethernet port of othere router and in case of fail is blocking one port entering in CLI and doing some command:
If I run this script all is working perfectly, but if I run in... (1 Reply)
I'm not sure if it is even possible but I figured if it was someone here would know how to do it...
I am running a script which starts a bunch of processes in the background but there is one process I would like to bring back to the foreground when complete. Unfortunately the process that I... (2 Replies)
What I need to learn is how to use a script that launches background processes, and then kills those processes as needed.
The script successfully launches the script. But how do I check to see if the job exists before I kill it?
I know my problem is mostly failure to understand parameter... (4 Replies)
Hi,
I am using net::ftp for transferring files now i am trying in the same Linux server as a result ftp is very fast but if the server is other location (remote) then the file transferred will be time consuming.
So i want try putting FTP part as a background process. I am unaware how to do... (5 Replies)
Hi, i was looking for an answer for some trouble im having runing a script in the cron, thing is, that when i run it manually it works just fine. But when cron runs it, it just doenst work. I saw a reply on a similar subject, suggesting that the . .profile worked for you, but im kind of... (9 Replies)
Hi,
I have written a menu driven shell script in which as per the choice, I run the another script on background.
For eg:
1. get info
2)process info
3)modify info
All the operations have different scripts which i schedule in background using &.
However I wish to display the error... (0 Replies)
Discussion started by: ashima jain
0 Replies
LEARN ABOUT DEBIAN
mrtg-ping-probe
MRTG-PING-PROBE(1) General Commands Manual MRTG-PING-PROBE(1)NAME
mrtg-ping-probe - ping probe module for Multi Router Traffic Grapher
DESCRIPTION
mrtg-ping-probe is a ping probe module for MRTG 2.x. It is used to monitor the round trip time and packet loss to networked devices. MRTG
uses the output of mrtg-ping-probe to generate graphs visualizing minimum and maximum round trip times or packet loss.
mrtg-ping-probe is not run directly, but is called by MRTG as a helper when it needs to determine ping time to a host.
Act responsibly: do not use mrtg-ping-probe to ping devices without the owner's permission. Just imagine if 10,000 people decided to ping
your hosts! mrtg-ping-probe is meant to be used within your network to get round trip time performance figures for your network.
OPTIONS
To use mrtg-ping-probe you need to configure MRTG to call it from within the definition of a target host. This is done in the MRTG config
file, which is usually /etc/mrtg.conf.
Here's an example snippet: change the target name and IP address to suit your needs.
Target[your.target.ping]: `/usr/bin/mrtg-ping-probe 123.456.789.123`
SetEnv[your.target.ping]: MRTG_INT_IP="123.456.789.123" MRTG_INT_DESCR="ping"
MaxBytes[your.target.ping]: 100
AbsMax[your.target.ping]: 200
Options[your.target.ping]: gauge, growright
YLegend[your.target.ping]: ping time (ms)
ShortLegend[your.target.ping]: ms
Legend1[your.target.ping]: Maximum Round Trip Time in ms
Legend2[your.target.ping]: Minimum Round Trip Time in ms
Legend3[your.target.ping]: Maximal 5 Minute Maximum Round Trip Time in ms
Legend4[your.target.ping]: Maximal 5 Minute Minimum Round Trip Time in ms
LegendI[your.target.ping]: Max:
LegendO[your.target.ping]: Min:
Pay close attention to the backticks in the first line which tell MRTG to execute the nominated external program. Note also that you need
to use the "gauge" option, since the results of subsequent ping probes are independant values and not an incrementing counter.
SEE ALSO mrtg(1).
The latest release of mrtg-ping-probe can be found on the web at http://pwo.de/projects/mrtg/
AUTHOR
This manual page was written by Jonathan Oxer <jon@debian.org>, for the Debian project (but may be used by others).
April 14, 2003 MRTG-PING-PROBE(1)