Sponsored Content
Operating Systems AIX Configurin EMC SAN disks on AIX Post 302203957 by ronellevan on Tuesday 10th of June 2008 08:44:30 AM
Old 06-10-2008
Configurin EMC SAN disks on AIX

This may sound like an absolute rookie question, and it is.

I have been working on Migrating our HP and Solaris servers to the new EMC SAN and know the routines backwards.

Now we've suddenly got a new IBM server and I don't even know how to check if it is connected to the switch.
Can someone give me detailed instructions - or a doc reference - on how to configure the FC?

Hopefully after that it will be smooth sailing with the EMC naviagent and power path software.

It is a system P6 running AIX 5.3.
I have connected the fibre cable between the server and the switch, and the switch port is active and saying "In_Sync"
 

9 More Discussions You Might Find Interesting

1. Linux

problem with disks on SAN

Hi I have a linux box attched to a SAN storage from EMC with RAID 5 .I understand that it has 3g cache howver a 20gb file creation takes too much time here are my results any ideas why time dd if=/dev/zero of=disk.img bs=1048576 count=20000 20000+0 records in 20000+0 records out 997.59s... (2 Replies)
Discussion started by: xiamin
2 Replies

2. Solaris

Reclaiming EMC disks after losing paths

First time writer....take it easy on me. I had a situation where I lost all paths to EMC disk. There was a failure on the EMC frame. After that was repaired, my server had a difficult time reclaiming all disks and veritas had marked the disks as failed. Veritas was confused. What are some of... (3 Replies)
Discussion started by: Sowser
3 Replies

3. Solaris

Thoughts/experiences of SAN attaching V880 to EMC SAN

Hi everyone, I wonder if I can canvas any opinions or thoughts (good or bad) on SAN attaching a SUN V880/490 to an EMC Clarion SAN? At the moment the 880 is using 12 internal FC-AL disks as a db server and seems to be doing a pretty good job. It is not I/O, CPU or Memory constrained and the... (2 Replies)
Discussion started by: si_linux
2 Replies

4. Solaris

Problem with accessing SAN disks

Hi, I'm having a problem when attempting to define the OCR location for my 10g RAC setup on Solaris 10. I get the following error: The specified shared raw partition /dev/did/rdsk/d1s0 may not have the correct permission. Verify that the partition is owned by Oracle user. As per the Oracle10g... (15 Replies)
Discussion started by: michael.chow
15 Replies

5. Solaris

Problems fetching EMC disks to Solaris OS.

Hi, I have a nasty little problem with my disks on my system My system configuration is as follows Sunv890 with sunos 9 connected tot a IBM6800 SAN using a 2port 2 GB qla2342 adapter. We have bought a EMC SAN. The company who sold us the san, said that it would be no problem connecting the... (10 Replies)
Discussion started by: orac
10 Replies

6. UNIX for Dummies Questions & Answers

Identify SAN disks

Hello everybody, I'm using the binary inqraid (Linux RHEL) in order to retrieve information about SAN disks. The questions are: Given an LDEV, how do I know if the SAN disk related to this LDEV is being used by the OS? I mean, how can I demonstrate to "Storage department" that all disks of... (4 Replies)
Discussion started by: asanchez
4 Replies

7. Red Hat

Identify SAN disks not in use

Hello, How can I identify SAN disks not in use by the OS? Thank you. (8 Replies)
Discussion started by: asanchez
8 Replies

8. AIX

Issue with increasing size of SAN disks on AIX

HI, I have had an issue last night while trying to extend a filesystsem . chvg -g <vg> command cameback with an error 0516-1790 chvg: Failed bootinfo -s hdisk9. Ensure the physical volume is available and try again. 0516-732 chvg: Unable to change volume group u01vg. the VG has 1... (1 Reply)
Discussion started by: xmen01
1 Replies

9. Solaris

Solaris 10 booting from EMC SAN DISK

Hi All, I have server : Sun-Fire-V490 configured with Solaris 10 zfs .. and I have configured three mirror the third one from EMC storage. root@server # zpool status -v pool: rpool state: ONLINE status: The pool is formatted using an older on-disk format. The pool can ... (8 Replies)
Discussion started by: top.level
8 Replies
VDE_PCAPPLUG(1) 					      General Commands Manual						   VDE_PCAPPLUG(1)

NAME
vde_pcapplug - Virtual Distributed Ethernet libpcap cable SYNOPSIS
vde_pcapplug [OPTION]... interface DESCRIPTION
vde_pcapplug is a plug to be connected into a VDE switch. All the data that is catched by the plug is injected into interface and every- thing from that interface is sent in the switch. OPTIONS
-p, --port=portnum It is possible to decide which port of the switch to use. When this option is not specified the switch assigns the first available unused port (if any). It is possible to connect several cables in the same switch port: in this way all this cables work concur- rently. It means that packet can result as duplicate but no ARP table loops are generated. Is useful when vde is used for mobil- ity. Several physical interfaces can be used at a time during handoffs to prevent hichups in connectivity. -g, --group=group group ownership of the communication socket. For security when more want to share a switch it is better to use a unix group to own the comm sockets so that the network traffic cannot be sniffed. -m, --mod=octal-mode octal chmod like permissions for the comm sockets -s, --sock=socket specify the UNIX socket to be used by local programs for joining the VDE. The default value is "/tmp/vde.ctl". -d, --daemon start vde_plug2tap as a background process -P, --pidfile=pidfile put the process ID of vde_plug2tap in pidfile. Can be used with --daemon to store the PID for future killing. -h, --help show a brief help NOTICE
Virtual Distributed Ethernet is not related in any way with www.vde.com ("Verband der Elektrotechnik, Elektronik und Informationstechnik" i.e. the German "Association for Electrical, Electronic & Information Technologies"). SEE ALSO
vde_switch(1), vde_plug(1), vdeq(1), dpipe(1). AUTHOR
VDE is a project by Renzo Davoli <renzo@cs.unibo.it> Virtual Distributed Ethernet August 20, 2008 VDE_PCAPPLUG(1)
All times are GMT -4. The time now is 05:03 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy