06-10-2008
Configurin EMC SAN disks on AIX
This may sound like an absolute rookie question, and it is.
I have been working on Migrating our HP and Solaris servers to the new EMC SAN and know the routines backwards.
Now we've suddenly got a new IBM server and I don't even know how to check if it is connected to the switch.
Can someone give me detailed instructions - or a doc reference - on how to configure the FC?
Hopefully after that it will be smooth sailing with the EMC naviagent and power path software.
It is a system P6 running AIX 5.3.
I have connected the fibre cable between the server and the switch, and the switch port is active and saying "In_Sync"
9 More Discussions You Might Find Interesting
1. Linux
Hi
I have a linux box attched to a SAN storage from EMC with RAID 5 .I understand that it has 3g cache howver a 20gb file creation takes too much time here are my results any ideas why
time dd if=/dev/zero of=disk.img bs=1048576 count=20000
20000+0 records in
20000+0 records out
997.59s... (2 Replies)
Discussion started by: xiamin
2 Replies
2. Solaris
First time writer....take it easy on me.
I had a situation where I lost all paths to EMC disk. There was a failure on the EMC frame. After that was repaired, my server had a difficult time reclaiming all disks and veritas had marked the disks as failed. Veritas was confused. What are some of... (3 Replies)
Discussion started by: Sowser
3 Replies
3. Solaris
Hi everyone,
I wonder if I can canvas any opinions or thoughts (good or bad) on SAN attaching a SUN V880/490 to an EMC Clarion SAN?
At the moment the 880 is using 12 internal FC-AL disks as a db server and seems to be doing a pretty good job. It is not I/O, CPU or Memory constrained and the... (2 Replies)
Discussion started by: si_linux
2 Replies
4. Solaris
Hi, I'm having a problem when attempting to define the OCR location for my 10g RAC setup on Solaris 10. I get the following error:
The specified shared raw partition /dev/did/rdsk/d1s0 may not have the correct permission. Verify that the partition is owned by Oracle user.
As per the Oracle10g... (15 Replies)
Discussion started by: michael.chow
15 Replies
5. Solaris
Hi,
I have a nasty little problem with my disks on my system
My system configuration is as follows
Sunv890 with sunos 9 connected tot a IBM6800 SAN using a 2port 2 GB qla2342 adapter.
We have bought a EMC SAN. The company who sold us the san, said that it would be no problem connecting the... (10 Replies)
Discussion started by: orac
10 Replies
6. UNIX for Dummies Questions & Answers
Hello everybody,
I'm using the binary inqraid (Linux RHEL) in order to retrieve information about SAN disks. The questions are:
Given an LDEV, how do I know if the SAN disk related to this LDEV is being used by the OS? I mean, how can I demonstrate to "Storage department" that all disks of... (4 Replies)
Discussion started by: asanchez
4 Replies
7. Red Hat
Hello,
How can I identify SAN disks not in use by the OS?
Thank you. (8 Replies)
Discussion started by: asanchez
8 Replies
8. AIX
HI, I have had an issue last night while trying to extend a filesystsem . chvg -g <vg> command cameback with an error
0516-1790 chvg: Failed bootinfo -s hdisk9.
Ensure the physical volume is available and try again.
0516-732 chvg: Unable to change volume group u01vg.
the VG has 1... (1 Reply)
Discussion started by: xmen01
1 Replies
9. Solaris
Hi All,
I have server : Sun-Fire-V490 configured with Solaris 10 zfs
..
and I have configured three mirror the third one from EMC
storage.
root@server # zpool status -v
pool: rpool
state: ONLINE
status: The pool is formatted using an older on-disk format. The pool can
... (8 Replies)
Discussion started by: top.level
8 Replies
fp(7d) Devices fp(7d)
NAME
fp - Sun Fibre Channel port driver
DESCRIPTION
The fp driver is a Sun fibre channel nexus driver that enables fibre channel topology discovery, device discovery, fibre channel adapter
port management and other capabilities through well-defined fibre channel adapter driver interfaces.
The fp driver requires the presence of a fabric name server in fabric and public loop topologies to discover fibre channel devices. In pri-
vate loop topologies, the driver discovers devices by performing PLOGI to all valid AL_PAs, provided that devices do not participate in
LIRP and LILP stages of loop initialization.
CONFIGURATION
The fp driver is configured by defining properties in the fp.conf file. The fp driver supports the following properties:
mpxio-disable
Solaris I/O multipathing is enabled or disabled on fibre channel devices with the mpxio-disable property. Specifying mpxio-disable="no"
activates I/O multipathing, while mpxio-disable="yes" disables the feature.
Solaris I/O multipathing may be enabled or disabled on a per port basis. Per port settings override the global setting for the specified
ports. The following example shows how to disable multipathing on port 0 whose parent is /pci@8,600000/SUNW,qlc@4:
name="fp" parent="/pci@8,600000/SUNW,qlc@4" port=0
mpxio-disable="yes";
manual_configuration_only
Automatic configuration of SCSI devices in the fabric is enabled by default and thus allows all devices discovered in the SAN zone to be
enumerated in the kernel's device tree automatically. The manual_configuration_only property may be configured to disable the default
behavior and force the manual configuration of the devices in the SAN. Specifying manual_configuration_only=1 disables the automatic con-
figuration of devices.
FILES
/kernel/drv/fp
32-bit ELF kernel driver (x86)
/kernel/drv/amd64/fp
64-bit ELF kernel driver (x86)
/kernel/drv/sparcv9/fp
64-bit ELF kernel driver (SPARC)
/kernel/drv/fp.conf
fp driver configuration file.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|mpxio-disable |Unstable |
+-----------------------------+-----------------------------+
|manual_configuration_only |Obsolete |
+-----------------------------+-----------------------------+
|Availability |SUNWfctl |
+-----------------------------+-----------------------------+
SEE ALSO
cfgadm_fp(1M), prtconf(1M), stmsboot(1M), driver.conf(4), attributes(5), fcp(7D), fctl(7D), scsi_vhci(7D)
Writing Device Drivers
Fibre Channel Physical and Signaling Interface (FC-PH) ANSI X3.230: 1994
Fibre Channel Generic Services (FC-GS-2) Project 1134-D
Fibre Channel Arbitrated Loop (FC-AL) ANSI X3.272-1996
Fibre Channel Protocol for SCSI (FCP) ANSI X3.269-1996
SCSI-3 Architecture Model (SAM) Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) ANSI X3.270-1996
SCSI Direct Attach (FC-PLDA) ANSI X3.270-1996
SCSI Direct Attach (FC-PLDA) NCITS TR-19:1998
Fabric Loop Attachment (FC-FLA), NCITS TR-20:1998
SunOS 5.10 2 Dec 2004 fp(7d)