06-06-2008
Thanks
Quote:
if_network="true"
if_modem="false"
if_connection="ssh"
if_emailalerts="false"
sys_autorestart="xir"
sys_bootrestart="none"
sys_bootfailrecovery="none"
sys_maxbootfail="3"
sys_xirtimeout="900"
sys_boottimeout="900"
sys_wdttimeout="60"
netsc_tpelinktest="true"
netsc_dhcp="false"
netsc_ipaddr="192.168.1.5"
netsc_ipnetmask="255.255.255.0"
netsc_ipgateway="192.168.1.1"
mgt_mailhost=""
mgt_mailalert=""
sc_customerinfo=""
sc_escapechars="#."
sc_powerondelay="false"
sc_powerstatememory="false"
sc_clipasswdecho="true"
sc_cliprompt="sc"
sc_clitimeout="0"
sc_clieventlevel="2"
sc_backupuserdata="true"
sys_eventlevel="2"
Is this correct ?
I am not able to connect when I do ssh 192.168.1.5
cable is connected from NM port to switch
GW is pingable. ( from the host itself )
Quote:
ping -s 192.168.1.1
PING 192.168.1.1: 56 data bytes
64 bytes from 192.168.1.1: icmp_seq=0. time=0.618 ms
64 bytes from 192.168.1.1: icmp_seq=1. time=0.648 ms
^X^C
----192.168.1.1 PING Statistics----
2 packets transmitted, 2 packets received, 0% packet loss
round-trip (ms) min/avg/max/stddev = 0.618/0.633/0.648/0.021
Last edited by upengan78; 06-06-2008 at 08:28 PM..
8 More Discussions You Might Find Interesting
1. Solaris
On v240's and v440's whenever i connect my laptop to the serial management port and when either the laptop goes into sleep mode, or i physicall disconnect the cable, the solaris boxes go to the ok prompt!!!! anyone have any idea... (3 Replies)
Discussion started by: csaunders
3 Replies
2. IP Networking
Hi all, one of my Sun Box facing the problem.
The network port i had set to Auto-Negotiated and i had edited the /etc/system/ file in the Sun box as below:
set hme:hme_adv_autoneg_cap=1
set hme:hme_adv_100fdx_cap=0
set hme:hme_adv_100hdx_cap=0
But when i checked the /var/adm/messages/, it... (0 Replies)
Discussion started by: AirWalker83
0 Replies
3. IP Networking
We are a small legal firm in the UK and looking to upgrade from some open source network management tools we are using.
I'm not finding very many commercially supported network management software solutions that run on Linux or UNIX for that matter.
Does anyone have any recommendations?
... (2 Replies)
Discussion started by: ctrenton
2 Replies
4. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
5. Solaris
:)Hi Solaris Experts,
I am wondering whether it is possible to clear a network socket port 17005 left by Apache Tomcat/6.0.20 after having to terminate it forcefully, since it has run away due to remote JDBC resource contention on another server. A normal Tomcat stop / shutdown proves... (2 Replies)
Discussion started by: gjackson123
2 Replies
6. IP Networking
Hi,
Please help me on issue described below,
I have 4 machine setup, M1 -> M2 -> M3 | M4. And A laptop that can be reachable through both M3 and M4.
M2 has 2 NIC conected to M3 and M4. Now I want to divide the flow coming from M1 for laptop.
At M2, I have done following,... (1 Reply)
Discussion started by: rahulbhansali24
1 Replies
7. Infrastructure Monitoring
If I would like to know what connection , data , traffic in a network port ( eth0 ) , what can I do ?
ps. because I always found the network is very slow , so I would like what the network port is doing .
Thanks
Login ID ust3 is currently in read-only mode for multiple infractions. Creating... (0 Replies)
Discussion started by: ust03
0 Replies
8. UNIX for Beginners Questions & Answers
hi, how can I make a acquaintance with the command ifconfig -a which address ip mangement.
Thank you
regards
Francesco Itollo (2 Replies)
Discussion started by: Francesco_IT
2 Replies
LEARN ABOUT SUNOS
asadmin-jms-ping
asadmin-jms-ping(1AS) User Commands asadmin-jms-ping(1AS)
NAME
jms-ping - checks to see if the JMS provider is up and running
SYNOPSIS
jms-ping --user admin_user [--password admin_password] [--host localhost] [--port 4848] [--passwordfile filename] [--secure|-s]
[--terse=false] [--echo=false] [--interactive=false]
Checks to see if the JMS provider is up and running. This command is supported in remote mode only.
OPTIONS
--user authorized domain application server administrative username.
--password password to administer the domain application server.
--host machine name where the domain application server is running.
--port port number of the domain application server listening for administration requests.
--passwordfile file containing the domain application server password.
--secure if true, uses SSL/TLS to communicate with the domain application server.
--terse indicates that any output data must be very concise, typically avoiding human-friendly sentences and favoring well-
formatted data for consumption by a script. Default is false.
--echo setting to true will echo the command line statement on the standard output. Default is false.
--interactive if set to true (default), only the required password options are prompted.
Example 1: Using jms-ping
asadmin> jms-ping --user admin --password adminadmin --host bluestar --port 4848 server1
JMS Ping Status=RUNNING
EXIT STATUS
0 command executed successfully
1 error in executing the command
asadmin-create-jmsdest(1AS), asadmin-delete-jmsdest(1AS), asadmin-list-jmsdest(1AS)
J2EE 1.4 SDK March 2004 asadmin-jms-ping(1AS)