Sponsored Content
Full Discussion: USB hard drive problem
Operating Systems SCO USB hard drive problem Post 302202846 by garycrow on Thursday 5th of June 2008 11:11:51 PM
Old 06-06-2008
Data USB hard drive problem

I have a USB hard drive attached to my SCO OSR6 machine I accidently powered it off while it was mounted and now the OS complains when you try to re-mount it and it appears that it is complaining because it has a new device number so it isn't at the original device location anymore. does anyone have an idea how I could fix this?
 

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies

2. Solaris

FAT32 usb external hard drive - how to mount??

Hello ! What is the comand to mount and usb hard disk ? I have Solaris 10 installed! 10nx! (1 Reply)
Discussion started by: daniel.balasa
1 Replies

3. Solaris

USB Hard Disk Drive Supported by Sun Fire V890

Hi, Can anyone suggest me any USB Hard Disk Drive which I can connect to Sun Fire V890 and take backup at a quick speed. A test with SolidState USB Hard Drive for backup work was taking writing at 2GB per hour for a 75GB backup. Regards, Tushar Kathe (1 Reply)
Discussion started by: tushar_kathe
1 Replies

4. Filesystems, Disks and Memory

USB Pen Drive & Hard Disk

Hi Guys, I have an external USB Hard Disk Drive on which I have 3 partitions and it works fine under Windows XP but when I am using Red Hat Linux 5 I don't see any icon for this USB HDD. Also I am not able to browse my USB Pen Drive. However, I can use it under Mandrake Linux without any... (4 Replies)
Discussion started by: indiansoil
4 Replies

5. Filesystems, Disks and Memory

external USb hard disk reading problem

Hello, I am facing a hard disk drive reading problem since last one month and not able to resolve it. The thing is I purchased external USB hard disk (seagate 40 gb) 2 years back.And uptil now its working perfectly fine. But suddenly one day I am not able to read my data. The problem goes like... (1 Reply)
Discussion started by: albertspade
1 Replies

6. Solaris

routing problem after replacing hard drive

Need to replace hard drive on Ultra 10 running Solaris 2.6. Bought new drive about the same size. Partitioned it differently to solve a space problem. After newfs used tar commands to copy most of the files to the new drive. Installboot took care of the boot file. ufsdump copied /dev and... (3 Replies)
Discussion started by: snorkack59
3 Replies

7. Solaris

USB External Hard Drive for Solaris 10 Sparc

Hi- I would like to know if anyone has used any USB External Hard Drive, about 500/750GB or 1TB, with any of the Solaris 10 "SPARC" systems. Not on intel nor amd platform. I'm looking for the compatible drive and found a few listed on Sun solaris ready page, but I'd like to have inputs from... (3 Replies)
Discussion started by: agfa_109
3 Replies

8. Solaris

Can not Format USB hard drive

Hey i have a new USB 320GB harddrive i want to use in my Solaris 10 enviroment. i first had the drive format in windows with FAT32, Solaris was able to auto mount this drive and everything was fine, until i realised that it would not except files greater then 4gb, due to the limitations of... (6 Replies)
Discussion started by: dshakey
6 Replies

9. UNIX for Advanced & Expert Users

Waking Up USB External Hard Drive for file archiving

Hello Experts, I hope I'm writing to the correct category for my question. I have a very basic shell script for doing file archiving to the external usb hard drive (WD studio edition II 2TB formatted as FAT32 for compatibility). The shell script only needs to run once per day. It basically... (8 Replies)
Discussion started by: johankor
8 Replies

10. Solaris

How do I mount a USB Hard Drive?

I have a Sun-Fire V440 running with Solaris 9 and am trying to get a WD USB Hard Drive mounted. None of the articles I've read so far have helped. Output from rmformat: Looking for devices... 1. Volmgt Node: /vol/dev/aliases/rmdisk0 Logical Node: /dev/rdsk/c5t0d0s2 ... (17 Replies)
Discussion started by: oldtimertj
17 Replies
mount_pcfs(1M)						  System Administration Commands					    mount_pcfs(1M)

NAME
mount_pcfs - mount pcfs file systems SYNOPSIS
mount -F pcfs [generic_options] [-o FSType-specific_options] special | mount_point mount -F pcfs [generic_options] [-o FSType-specific_options] special mount_point DESCRIPTION
mount attaches an MS-DOS file system (pcfs) to the file system hierarchy at the mount_point, which is the pathname of a directory. If mount_point has any contents prior to the mount operation, these are hidden until the file system is unmounted. If mount is invoked with special or mount_point as the only arguments, mount will search /etc/vfstab to fill in the missing arguments, including the FSType-specific_options; see mount(1M) for more details. The special argument can be one of two special device file types: o A floppy disk, such as /dev/diskette0 or /dev/diskette1. o A DOS logical drive on a hard disk expressed as device-name:logical-drive , where device-name specifies the special block device-file for the whole disk and logical-drive is either a drive letter (c through z) or a drive number (1 through 24). Examples are /dev/dsk/c0t0d0p0:c and /dev/dsk/c0t0d0p0:1. The special device file type must have a formatted MS-DOS file system with either a 12-bit, 16-bit, or 32-bit File Allocation Table. OPTIONS
generic_options See mount(1M) for the list of supported options. -o Specify pcfs file system specific options. The following options are supported: foldcase|nofoldcase Force uppercase characters in filenames to lowercase when reading them from the filesystem. This is for compatibility with the pre- vious behavior of pcfs. The default is nofoldcase. FILES
/etc/mnttab table of mounted file systems /etc/vfstab list of default parameters for each file system ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWesu | +-----------------------------+-----------------------------+ SEE ALSO
mount(1M), mountall(1M), mount(2), mnttab(4), vfstab(4), attributes(5), pcfs(7FS) NOTES
If the directory on which a file system is to be mounted is a symbolic link, the file system is mounted on the directory to which the sym- bolic link refers, rather than on top of the symbolic link itself. SunOS 5.10 24 Nov 2003 mount_pcfs(1M)
All times are GMT -4. The time now is 11:47 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy