RPMBUILD(8)						      System Manager's Manual						       RPMBUILD(8)

NAME

       rpmbuild - Build RPM Package(s)

SYNOPSIS

   BUILDING PACKAGES:
       rpmbuild {-ba|-bb|-bp|-bc|-bi|-bl|-bs} [rpmbuild-options] SPECFILE ...

       rpmbuild {-ta|-tb|-tp|-tc|-ti|-tl|-ts} [rpmbuild-options] TARBALL ...

       rpmbuild {--rebuild|--recompile} SOURCEPKG ...

   MISCELLANEOUS:
       rpmbuild --showrc

   rpmbuild-options
	[--buildroot DIRECTORY] [--clean] [--nobuild]
	[--rmsource] [--rmspec] [--short-circuit] [--sign]
	[--target PLATFORM]

DESCRIPTION

       rpmbuild  is  used  to  build  both  binary  and source software packages.  A package consists of an archive of files and meta-data used to
       install and erase the archive files. The meta-data includes helper scripts, file attributes, and descriptive information about the package.
       Packages  come  in two varieties: binary packages, used to encapsulate software to be installed, and source packages, containing the source
       code and recipe necessary to produce binary packages.

       One of the following basic modes must be selected: Build Package, Build Package from Tarball, Recompile Package, Show Configuration.

   GENERAL OPTIONS
       These options can be used in all the different modes.

       -?, --help
	      Print a longer usage message then normal.

       --version
	      Print a single line containing the version number of rpm being used.

       --quiet
	      Print as little as possible - normally only error messages will be displayed.

       -v     Print verbose information - normally routine progress messages will be displayed.

       -vv    Print lots of ugly debugging information.

       --rcfile FILELIST
	      Each of the files in the colon separated FILELIST is read sequentially by rpm for configuration information.  Only the first file in
	      the    list    must   exist,   and   tildes   will   be	expanded   to	the   value   of   $HOME.    The   default   FILELIST	is
	      /usr/lib/rpm/rpmrc:/usr/lib/rpm/redhat/rpmrc:/etc/rpmrc:~/.rpmrc.

       --pipe CMD
	      Pipes the output of rpm to the command CMD.

       --dbpath DIRECTORY
	      Use the database in DIRECTORY rather than the default path /var/lib/rpm

       --root DIRECTORY
	      Use the file system tree rooted at DIRECTORY for all operations.	Note that this means the database within DIRECTORY  will  be  used
	      for  dependency  checks  and  any  scriptlet(s)  (e.g.   %post  if  installing, or %prep if building, a package) will be run after a
	      chroot(2) to DIRECTORY.

   BUILD OPTIONS
       The general form of an rpm build command is

       rpmbuild -bSTAGE|-tSTAGE [      rpmbuild-options
	] FILE ...

       The argument used is -b if a spec file is being used to build the package and -t if rpmbuild should look inside of a (possibly  compressed)
       tar  file  for the spec file to use. After the first argument, the next character (STAGE) specifies the stages of building and packaging to
       be done and is one of:

       -ba    Build binary and source packages (after doing the %prep, %build, and %install stages).

       -bb    Build a binary package (after doing the %prep, %build, and %install stages).

       -bp    Executes the "%prep" stage from the spec file. Normally this involves unpacking the sources and applying any patches.

       -bc    Do the "%build" stage from the spec file (after doing the %prep stage).  This generally involves the equivalent of a "make".

       -bi    Do the "%install" stage from the spec file (after doing the %prep and %build stages).  This generally involves the equivalent  of  a
	      "make install".

       -bl    Do a "list check".  The "%files" section from the spec file is macro expanded, and checks are made to verify that each file exists.

       -bs    Build just the source package.

       The following options may also be used:

       --buildroot DIRECTORY
	      When building a package, override the BuildRoot tag with directory DIRECTORY.

       --clean
	      Remove the build tree after the packages are made.

       --nobuild
	      Do not execute any build stages. Useful for testing out spec files.

       --nodeps
	      Do not verify build dependencies.

       --rmsource
	      Remove the sources after the build (may also be used standalone, e.g. "rpmbuild --rmsource foo.spec").

       --rmspec
	      Remove the spec file after the build (may also be used standalone, eg. "rpmbuild --rmspec foo.spec").

       --short-circuit
	      Skip straight to specified stage (i.e., skip all stages leading up to the specified stage).  Only valid with -bc and -bi.

       --sign Embed  a	GPG  signature	in the package. This signature can be used to verify the integrity and the origin of the package.  See the
	      section on GPG SIGNATURES in rpm(8) for configuration details.

       --target PLATFORM
	      When building the package, interpret PLATFORM as arch-vendor-os and set the macros %_target, %_target_cpu, and  %_target_os  accord-
	      ingly.

   REBUILD AND RECOMPILE OPTIONS
       There are two other ways to invoke building with rpm:

       rpmbuild --rebuild|--recompile SOURCEPKG ...

       When  invoked  this way, rpmbuild installs the named source package, and does a prep, compile and install.  In addition, --rebuild builds a
       new binary package. When the build has completed, the build directory is removed (as in --clean) and the the sources and spec file for  the
       package are removed.

   SHOWRC
       The command

       rpmbuild --showrc

       shows the values rpmbuild will use for all of the options are currently set in rpmrc and macros configuration file(s).

FILES

   rpmrc Configuration
       /usr/lib/rpm/rpmrc
       /usr/lib/rpm/redhat/rpmrc
       /etc/rpmrc
       ~/.rpmrc

   Macro Configuration
       /usr/lib/rpm/macros
       /usr/lib/rpm/redhat/macros
       /etc/rpm/macros
       ~/.rpmmacros

   Database
       /var/lib/rpm/Basenames
       /var/lib/rpm/Conflictname
       /var/lib/rpm/Dirnames
       /var/lib/rpm/Filemd5s
       /var/lib/rpm/Group
       /var/lib/rpm/Installtid
       /var/lib/rpm/Name
       /var/lib/rpm/Packages
       /var/lib/rpm/Providename
       /var/lib/rpm/Provideversion
       /var/lib/rpm/Pubkeys
       /var/lib/rpm/Removed
       /var/lib/rpm/Requirename
       /var/lib/rpm/Requireversion
       /var/lib/rpm/Sha1header
       /var/lib/rpm/Sigmd5
       /var/lib/rpm/Triggername

   Temporary
       /var/tmp/rpm*

SEE ALSO

       popt(3),
       rpm2cpio(8),
       gendiff(1),
       rpm(8),

       rpmbuild --help - as rpm supports customizing the options via popt aliases it's impossible to guarantee that what's described in the manual
       matches what's available.

       http://www.rpm.org/ <URL:http://www.rpm.org/>

AUTHORS

       Marc Ewing <marc@redhat.com>
       Jeff Johnson <jbj@redhat.com>
       Erik Troan <ewt@redhat.com>

Red Hat, Inc.							   09 June 2002 						       RPMBUILD(8)