Sponsored Content
Operating Systems Solaris Making filesystem on presented lun Post 302200930 by seanban on Friday 30th of May 2008 10:39:36 AM
Old 05-30-2008
Question Making filesystem on presented lun

Hi,

I am working on SunOS perlrate 5.10 Generic_127111-09 sun4v sparc SUNW,SPARC-Enterprise-T5120.

The server has an LSISAS3801E HBA card installed and is connected to a StorageTek 2530 array.

I have made a volume on arrary using Common Array Manager.

I can see the volume on server:

root@perlrate # format
Searching for disks...done

c4t1d0: configured with capacity of 20.00GB

AVAILABLE DISK SELECTIONS:
0. c2t5000C5000A5C916Fd0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/scsi_vhci/disk@g5000c5000a5c916f
1. c2t5000C5000A5C9817d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/scsi_vhci/disk@g5000c5000a5c9817
2. c4t1d0 <SUN-LCSM100_S-0670 cyl 10238 alt 2 hd 64 sec 64>
/pci@0/pci@0/pci@8/pci@0/pci@1/LSILogic,sas@0/sd@1,0

Can anyone advise how to make a filesystem on the presented LUN - disk 2 above?

If i try to label the disk I get this error:
Warning: error writing VTOC

If i try to format the disk I get this error:
Formatting...
Illegal request during format

If I try to make a filesystem directly I get this error:
root@perlrate # newfs /dev/rdsk/c4t1d0s2
/dev/rdsk/c4t1d0s2: I/O error

Basically, Im an oracle guy working well out of his depth with OS and SAN config.

I've read extensively on internet but am getting nowhere. mpxio is enabled but I don't even know if this is relevent ..

3 days in and I need help.

Thanks,

John
 

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

error making filesystem when install UNIX

someone help me to figure out about this error i´m installing a 36Gb SCSI Hd and i used the custom option in unixSCO for create the diferents filesystems, when the process is finish the next error message apears: Exit value 139 status value -29952 Fatal error in disk info.c line 3525... (3 Replies)
Discussion started by: jav_v
3 Replies

2. Solaris

Can't see Lun presented from T3B to Solaris8

Hello, I am having trouble with getting Lun visible to the solaris 8 host from the Array SUN T3B. It's SunFire 280R with Qlogic QLA2340 directly connected via 1 FC path to T3. On the array there is one 500GB volume created and mounted. I have tried with both F/w version of the array 2.1.6 and... (4 Replies)
Discussion started by: oktawik
4 Replies

3. Solaris

Solaris 10 /proc making filesystem full

Hi all, I have a solaris 10 box on which /proc is a part of / The problem is that my / partition is getting full mainly due to /proc getting a lot of files. My question is : Can I delete files/directories in /proc directory. If not what could be the other way round to clean up /proc so... (18 Replies)
Discussion started by: run_time_error
18 Replies

4. Solaris

I have LUN ID, how to find disk relate to that LUN ID?

I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer. thanks (4 Replies)
Discussion started by: uuontario
4 Replies

5. Red Hat

Creating filesystem on new LUN

I'm new to linux and need information on how do I create a filesytem on a dedicated on LUN for RHEL 4 and 5? I want the filesystem to be a ext3 ---------- Post updated at 10:00 AM ---------- Previous update was at 08:56 AM ---------- Found the answer. This thread can be closed. (1 Reply)
Discussion started by: soupbone38
1 Replies

6. UNIX for Dummies Questions & Answers

hwo to find shared filesystem and local filesystem in AIX

Hi, I wanted to find out that in my database server which filesystems are shared storage and which filesystems are local. Like when I use df -k, it shows "filesystem" and "mounted on" but I want to know which one is shared and which one is local. Please tell me the commands which I can run... (2 Replies)
Discussion started by: kamranjalal
2 Replies

7. Red Hat

Grow LUN presented on Linux host

Hi, I have a SAN LUN of 550 GB created as an ext3 partition of the entire lun and need to make the lun and partition larger... 600 GB # fdisk -l /dev/sdj Disk /dev/sdj: 590.5 GB, 590558003200 bytes 255 heads, 63 sectors/track, 71797 cylinders Units = cylinders of 16065 * 512 = 8225280... (3 Replies)
Discussion started by: jamba1
3 Replies

8. Solaris

Solaris Filesystem vs. Windows FileSystem

Hi guys! Could you tell me what's the difference of filesystem of Solaris to filesystem of Windows? I need to compare both. I have read some over the net but it's so much technical. Could you explain it in a more simpler term? I am new to Solaris. Hope you help me guys. Thanks! (4 Replies)
Discussion started by: arah
4 Replies

9. AIX

Mount Filesystem in AIX Unable to read /etc/filesystem

Dear all, We are facing prolem when we are going to mount AIX filesystem, the system returned the following error 0506-307The AFopen call failed : A file or directory in the path name does not exist. But when we ls filesystems in the /etc/ directory it show -rw-r--r-- 0 root ... (2 Replies)
Discussion started by: m_raheelahmed
2 Replies

10. Red Hat

How to resize filesystem by resizing the LUN without impact to applications.?

Is it possible to resize a filesystem by resizing the LUN on RHEL 6.4 64-bit with LVM and no impact to running applications? The research I have done so far seems to take the approach of adding a new LUN and then expaning the volume group to the new LUN. I'm looking for an approach that avoids a... (7 Replies)
Discussion started by: aenagy
7 Replies
disks(1M)						  System Administration Commands						 disks(1M)

NAME
disks - creates /dev entries for hard disks attached to the system SYNOPSIS
/usr/sbin/disks [-C] [-r rootdir] DESCRIPTION
devfsadm(1M) is now the preferred command for /dev and should be used instead of disks. disks creates symbolic links in the /dev/dsk and /dev/rdsk directories pointing to the actual disk device special files under the /devices directory tree. It performs the following steps: 1. disks searches the kernel device tree to see what hard disks are attached to the system. It notes the /devices pathnames for the slices on the drive and determines the physical component of the corresponding /dev/dsk or /dev/rdsk name. 2. The /dev/dsk and /dev/rdsk directories are checked for disk entries - that is, symbolic links with names of the form cN[tN]dNsN, or cN[tN]dNpN, where N represents a decimal number. cN is the logical controller number, an arbitrary number assigned by this program to designate a particular disk controller. The first controller found on the first occasion this program is run on a system, is assigned number 0. tN is the bus-address number of a subsidiary controller attached to a peripheral bus such as SCSI or IPI (the target number for SCSI, and the facility number for IPI controllers). dN is the number of the disk attached to the controller. sN is the slice number on the disk. pN is the FDISK partition number used by fdisk(1M). (x86 Only) 3. If only some of the disk entries are found in /dev/dsk for a disk that has been found under the /devices directory tree, disks creates the missing symbolic links. If none of the entries for a particular disk are found in /dev/dsk, disks checks to see if any entries exist for other disks attached to the same controller, and if so, creates new entries using the same controller number as used for other disks on the same controller. If no other /dev/dsk entries are found for slices of disks belonging to the same physical con- troller as the current disk, disks assigns the lowest-unused controller number and creates entries for the disk slices using this newly-assigned controller number. disks is run automatically each time a reconfiguration-boot is performed or when add_drv(1M) is executed. When invoking disks(1M) manually, first run drvconfig(1M) to ensure /devices is consistent with the current device configuration. Notice to Driver Writers disks considers all devices with a node type of DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, DDI_NT_BLOCK_WWN or DDI_NT_CD_CHAN to be disk devices. disks(1M) requires the minor name of disk devices obey the following format conventions. The minor name for block interfaces consists of a single lowercase ASCII character, a through u. The minor name for character (raw) inter- faces consists of a single lowercase ASCII character, a through u, followed by ,raw. disks translates a through p to s0 through s15, while it translates q through u to p0 through p4. SPARC drivers should only use the first 8 slices: a through h, while x86 drivers can use a through u, with q through u corresponding to fdisk(1M) partitions. q represents the entire disk, while r, s, t, and u represent up to 4 additional partitions. To prevent disks from attempting to automatically generate links for a device, drivers must specify a private node type and refrain from using a node type: DDI_NT_BLOCK, DDI_NT_BLOCK_CHAN, DDI_NT_CD, or DDI_NT_CD_CHAN when calling ddi_create_minor_node(9F). OPTIONS
The following options are supported: -C Causes disks to remove any invalid links after adding any new entries to /dev/dsk and /dev/rdsk. Invalid links are links which refer to non-existent disk nodes that have been removed, powered off, or are otherwise inaccessible. -r rootdir Causes disks to presume that the /dev/dsk, /dev/rdsk and /devices directory trees are found under rootdir, not directly under /. ERRORS
If disks finds entries of a particular logical controller linked to different physical controllers, it prints an error message and exits without making any changes to the /dev directory, since it cannot determine which of the two alternative logical-to-physical mappings is correct. The links should be manually corrected or removed before another reconfiguration-boot is performed. EXAMPLES
Example 1: Creating Block and Character Minor Devices The following example demonstrates creating the block and character minor devices from within the xkdisk driver's attach(9E) function. #include <sys/dkio.h> /* * Create the minor number by combining the instance number * with the slice number. */ #define MINOR_NUM(i, s) ((i) << 4 | (s)) int xkdiskattach(dev_info_t *dip, ddi_attach_cmd_t cmd) { int instance, slice; char name[8]; /* other stuff in attach... */ instance = ddi_get_instance(dip); for (slice = 0; slice < V_NUMPAR; slice++) { /* * create block device interface */ sprintf(name, "%c", slice + 'a'); ddi_create_minor_node(dip, name, S_IFBLK, MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0); /* * create the raw (character) device interface */ sprintf(name,"%c,raw", slice + 'a'); ddi_create_minor_node(dip, name, S_IFCHR, MINOR_NUM(instance, slice), DDI_NT_BLOCK_CHAN, 0); } } Installing the xkdisk disk driver on a Sun Fire 4800, with the driver controlling a SCSI disk (target 3 attached to an isp(7D) SCSI HBA) and performing a reconfiguration-boot (causing disks to be run) creates the following special files in /devices. # ls -l /devices/ssm@0,0/pci@18,700000/pci@1/SUNW,isptwo@4/ brw-r----- 1 root sys 32, 16 Aug 29 00:02 xkdisk@3,0:a crw-r----- 1 root sys 32, 16 Aug 29 00:02 xkdisk@3,0:a,raw brw-r----- 1 root sys 32, 17 Aug 29 00:02 xkdisk@3,0:b crw-r----- 1 root sys 32, 17 Aug 29 00:02 xkdisk@3,0:b,raw brw-r----- 1 root sys 32, 18 Aug 29 00:02 xkdisk@3,0:c crw-r----- 1 root sys 32, 18 Aug 29 00:02 xkdisk@3,0:c,raw brw-r----- 1 root sys 32, 19 Aug 29 00:02 xkdisk@3,0:d crw-r----- 1 root sys 32, 19 Aug 29 00:02 xkdisk@3,0:d,raw brw-r----- 1 root sys 32, 20 Aug 29 00:02 xkdisk@3,0:e crw-r----- 1 root sys 32, 20 Aug 29 00:02 xkdisk@3,0:e,raw brw-r----- 1 root sys 32, 21 Aug 29 00:02 xkdisk@3,0:f crw-r----- 1 root sys 32, 21 Aug 29 00:02 xkdisk@3,0:f,raw brw-r----- 1 root sys 32, 22 Aug 29 00:02 xkdisk@3,0:g crw-r----- 1 root sys 32, 22 Aug 29 00:02 xkdisk@3,0:g,raw brw-r----- 1 root sys 32, 23 Aug 29 00:02 xkdisk@3,0:h crw-r----- 1 root sys 32, 23 Aug 29 00:02 xkdisk@3,0:h,raw /dev/dsk will contain the disk entries to the block device nodes in /devices # ls -l /dev/dsk /dev/dsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a /dev/dsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b /dev/dsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c /dev/dsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d /dev/dsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e /dev/dsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f /dev/dsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g /dev/dsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h and /dev/rdsk will contain the disk entries for the character device nodes in /devices # ls -l /dev/rdsk /dev/rdsk/c0t3d0s0 -> ../../devices/[...]/xkdisk@3,0:a,raw /dev/rdsk/c0t3d0s1 -> ../../devices/[...]/xkdisk@3,0:b,raw /dev/rdsk/c0t3d0s2 -> ../../devices/[...]/xkdisk@3,0:c,raw /dev/rdsk/c0t3d0s3 -> ../../devices/[...]/xkdisk@3,0:d,raw /dev/rdsk/c0t3d0s4 -> ../../devices/[...]/xkdisk@3,0:e,raw /dev/rdsk/c0t3d0s5 -> ../../devices/[...]/xkdisk@3,0:f,raw /dev/rdsk/c0t3d0s6 -> ../../devices/[...]/xkdisk@3,0:g,raw /dev/rdsk/c0t3d0s7 -> ../../devices/[...]/xkdisk@3,0:h,raw FILES
/dev/dsk/* Disk entries (block device interface) /dev/rdsk/* Disk entries (character device interface) /devices/* Device special files (minor device nodes) ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ SEE ALSO
add_drv(1M), devfsadm(1M), fdisk(1M), attributes(5), isp(7D), devfs(7FS), dkio(7I), attach(9E), ddi_create_minor_node(9F) Writing Device Drivers BUGS
disks silently ignores malformed minor device names. SunOS 5.10 7 Nov 2002 disks(1M)
All times are GMT -4. The time now is 06:36 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy