veritas and nic cards Post: 302200164

10 More Discussions You Might Find Interesting

1. Solaris

NIC cards for sunblade 100

I need to add a PCI NIC to a sunblade 100 running solaris 8. Im new to this and was hoping someone could give me some card names and models which will work for this system and has a driver for this sparc system. thanks

2. IP Networking

Setup 2 NIC cards in one UNIX system

Hi; I have a UNIX box (SCO 5.0.2) with two (2) NIC cards. One card (NIC1) talks to a network 57.14.65.x/27. The other card NIC2) talks to users on 57.14.103.x and 57.14.105.x with subnet mask of 255.255.0.0. If I set NIC2 to this subnet mask (255.255.0.0) it seems like the NIC traffic is now...

3. HP-UX

routing issues with multiple NIC cards

I am running HP_UX 11.23 with 4 NIC cards (this is our TSM server) I have 4 subnets we are backing across. trying to keep traffic on their subnets. I only have one route statment should I add more. route add net 123.99.8.0 netmask 255.255.255.0 123.99.8.254 route add net 123.99.67.0 netmask...

4. Red Hat

External NIC cards not pinging with each other in RHEL 5.1

We have a setup of two nodes which has two NIC cards in each. One is built in and another is D-Link (external NIC card). We are unable to ping to the external NIC cards in both. Eg: Node A has two IPs 192.168.1.10 (eth0) and 192.168.2.10 (eth1) and Node B has two IPs 192.168.1.20 (eth0) and...

5. HP-UX

HP UX 9000 NIC CARDS

Hello, I am trying to move an HP UX from one locaion to another. The new location don't have any Fiber switches. On the back of my server I see 2 RJ 45 for console management the other for networking , the server also has a fiber NIC card. When I disconnec the fiber and want to user regular...

6. IP Networking

Best reference for understanding low level info on nic cards drivers and functionality

Hi, What is the best reference that gives in detail on nic cards configuration , assigning multiple ip addresses to a single interface, netlink library etc and all basic stuff at this level..? Thanks

7. Ubuntu

Help asap squid with 2 nic cards setup

I found an old post that talks about 2 nice cards and it is driven by the IP address .... but I didn't understand it because the 2 people skipped information for me the newbie.. Can someone help me... I have the proxy server setup and I believe I have enabled the 2nd nic card, I just need one...

8. Ubuntu

How do you setup 2 nic cards for squid Ubuntu server?

I have a made my squid proxy, I now have add another nic card to an old CPU using Ubuntu server 12.04. I have seen another post similar however I am new and did not understand some of it. Something about redirecting IP address and IP table? I don't know how to do this.:confused:

9. Linux

Add two different subnet public IPs to single NIC or two different NIC on same box

Hello Admins, My ask is how can I add two different subnet IPs to same box with two different gateways? The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware. How can I get connected...

10. UNIX for Beginners Questions & Answers

How to extend a disk in veritas volume manager in veritas cluster?

Hi Experts, I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system. #hastatus -sum -- System State Frozen A node1 running 0 A node2 running 0 -- Group State -- Group System Probed ...

LEARN ABOUT DEBIAN

ocf_heartbeat_sendarp

OCF_HEARTBEAT_SENDAR(7) 					OCF resource agents					   OCF_HEARTBEAT_SENDAR(7)

NAME

       ocf_heartbeat_SendArp - Broadcasts unsolicited ARP announcements

SYNOPSIS

       SendArp [start | stop | monitor | meta-data | validate-all]

DESCRIPTION

       This RA can be used _instead_ of the IPaddr2 or IPaddr RA to send gratuitous ARP for an IP address on a given interface, without adding the
       address to that interface. For example, if for some resaon you wanted to send gratuitous ARP for addresses managed by IPaddr2 or IPaddr on
       an additional interface.

SUPPORTED PARAMETERS

       ip
	   The IP address for sending ARP packet.  (required, string, no default)

       nic
	   The NIC for sending ARP packet.  (required, string, no default)

SUPPORTED ACTIONS

       This resource agent supports the following actions (operations):

       start
	   Starts the resource. Suggested minimum timeout: 20s.

       stop
	   Stops the resource. Suggested minimum timeout: 20s.

       monitor
	   Performs a detailed status check. Suggested minimum timeout: 20. Suggested interval: 10.

       meta-data
	   Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5.

       validate-all
	   Performs a validation of the resource configuration. Suggested minimum timeout: 20s.

EXAMPLE

       The following is an example configuration for a SendArp resource using the crm(8) shell:

	   primitive p_SendArp ocf:heartbeat:SendArp 
	     params 
	       ip=string 
	       nic=string 
	     op monitor depth="0" timeout="20" interval="10"

SEE ALSO

       http://www.linux-ha.org/wiki/SendArp_(resource_agent)

AUTHOR

       Linux-HA contributors (see the resource agent source for information about individual authors)

resource-agents UNKNOWN 					    03/09/2014						   OCF_HEARTBEAT_SENDAR(7)