05-27-2008
That gave me:
# prtdiag
System Configuration:
BIOS Configuration: Phoenix Technologies, LTD 6.00 PG 07/07/2006
==== Processor Sockets ====================================
Version Location Tag
-------------------------------- --------------------------
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
------- ------ --- ------------------- --------------------
==== On-Board Devices =====================================
==== Upgradeable Slots ====================================
ID Status Type Description
--- --------- ---------------- ----------------------------
#
So in other words nothing. Did I use it correct or is my hardware not supported? I've got 6 HD (5 are 750 gb samsungs and the other a 160 GB WD), running a AMD sempron on a ECS motherboard with ATI 1150 Ex onboard graphics. All are supported under Solaris, but maybe not their sensors? Do I need to get a seperate thermocouple?
Cisco
9 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
I have suns machine that holds two hard drives. I only used one. I tryed to make a lan network with my windows xp. When I tryed to restart the machine it wanted to a password. when before I just typed root to log in. So i edited the etc dir. big mistake. So now the machine will not read the hard... (2 Replies)
Discussion started by: victbla
2 Replies
2. UNIX for Dummies Questions & Answers
Hello, earlier tonight I was installing BETA version of Mandrake Linux 9.0 and I realised I needed to partition my drive. I tried making the partition within mandrake but ther wasnt an option within the mandrake setup. So i go into my WindowsXP and do the disk management option but there want a... (5 Replies)
Discussion started by: xcaliber
5 Replies
3. Linux
Does anybody know what command will bring up my harddrive and how much room is left on it? (13 Replies)
Discussion started by: byblyk
13 Replies
4. UNIX for Dummies Questions & Answers
Hi,
Can someone answer to my question.I' totally new to Unix.
What is the command for removing the hard drive from the system?
Thanks a lot,
Puja (2 Replies)
Discussion started by: pujathakral
2 Replies
5. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
6. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
7. AIX
Good day,
I have an rs/6000 server, model 7044-270. I bought a 2nd hard drive for it but im not sure its the right one. (fru:H13060) As you surely know, the 7044-270 hard drives are put in some sort of tray/carrier. There is a cable that will interface the HDD with the tray/carrier so the... (0 Replies)
Discussion started by: Netghost
0 Replies
8. Solaris
Hi
When I installed opensolaris, I installed it on a 20GB partition. How do I make use of the other 300GB I have spare?
format shows:-
-bash-3.2# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c3d0 <DEFAULT cyl 2607 alt 2 hd 255 sec 63>
... (12 Replies)
Discussion started by: hellotommy
12 Replies
9. Red Hat
Im trying to install a fresh version of Fedora 17. I keep getting formating errors when trying to reformat the hard drive. I recieve errors as well I I try to use the entire disk for the install instead of creat new partitions from scratch. I even tried fromatting the disk using PartedMagic and... (7 Replies)
Discussion started by: Fingerz
7 Replies
LEARN ABOUT DEBIAN
config::model::models::lcdd::cwlnx
Config::Model::models::LCDd::CwLnx(3pm) User Contributed Perl Documentation Config::Model::models::LCDd::CwLnx(3pm)
NAME
Config::Model::models::LCDd::CwLnx - Configuration class LCDd::CwLnx
VERSION
version 2.021
DESCRIPTION
Configuration classes used by Config::Model
generated from LCDd.conf
Elements
Model
Select the LCD model Optional. Type enum. choice: '12232', '12832', '1602'. upstream_default: '12232'.
Device
Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.
Size
Select the LCD size. Default depends on model: 12232: 20x4 12832: 21x4 1602: 16x2. Optional. Type uniline. default: '20x4'.
Speed
Set the communication speed Optional. Type enum. choice: '9600', '19200'. upstream_default: '19200'.
Reboot
Reinitialize the LCD's BIOS normally you shouldn't need this. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.
Keypad
If you have a keypad connected. Keypad layout is currently not configureable from the config file.Optional. Type uniline. default: 'yes'.
keypad_test_mode
If you have a non-standard keypad you can associate any keystrings to keys. There are 6 input keys in the CwLnx hardware that generate
characters from 'A' to 'F'.
The following is the built-in default mapping hardcoded in the driver. You can leave those unchanged if you have a standard keypad. You
can change it if you want to report other keystrings or have a non standard keypad. KeyMap_A=Up KeyMap_B=Down KeyMap_C=Left KeyMap_D=Right
KeyMap_E=Enter KeyMap_F=Escape keypad_test_mode permits one to test keypad assignment Default value is no. Optional. Type uniline. default:
'yes'.
SEE ALSO
o cme
perl v5.14.2 2012-11-09 Config::Model::models::LCDd::CwLnx(3pm)