|
|
Sponsored Content
Operating Systems
SCO
Installing SCO OpenServer v5.07 on an HP ML350 G5 server
Post 302199617 by davosky on Tuesday 27th of May 2008 09:46:32 AM
05-27-2008
Network on ML370 G5
Hello all,
After installing the Sco openserver5.0.7, i downloaded the network drivers downloaded for the HP ML370 G5 Servers from the net and installed Intel (R) Pro/100 Network according to instructions i noticed that i couldnt ping the server itself with the ip address i used.
and i have to connect it to the windows xp workstations . what do u advise that i do?
Thanks i really need help seriously
davosky
After installing the Sco openserver5.0.7, i downloaded the network drivers downloaded for the HP ML370 G5 Servers from the net and installed Intel (R) Pro/100 Network according to instructions i noticed that i couldnt ping the server itself with the ip address i used.
and i have to connect it to the windows xp workstations . what do u advise that i do?
Thanks i really need help seriously
davosky
|
|
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi,
i have 4 Unix Sco openservers, 4PCs running windows 2000, and 1 PC with windows server which i want to configure in the same network.
During the configuration procedure, the wizard of Windows 2000 SERVER ask you if this is the only server in the network, now it will be the only WINDOWS... (2 Replies)
Discussion started by: BAM
2 Replies
2. SCO
Hi Guys,
I want ur replies very very Urgently.Plz. don't ignore this mail.
I am using Sco openserver 5.0.2 and i have downloaded jdk1.2.2
for that i have installed it.The jdk is working fine.
Then i download jakarta-tomcat-4.1.24.zip and i have installed it.
In order... (1 Reply)
Discussion started by: ananthu_m
1 Replies
3. SCO
Dear members
when i installed dual processor patch in openserver 5.0.7 in hp ML370 G4 server it hangs in sco at G_hd_config.
i tried MP4, EFS 5.64,5.70A but not solved the problem.. (0 Replies)
Discussion started by: M_farooqui
0 Replies
4. UNIX for Dummies Questions & Answers
Trying to install Sco OSR 6.0 on Dell Optiplex with SERIAL ATA ADADPTEC 1210SA controller.
Sco says its sipported by the AACRAID driver but on installation its says that it doesnt recognise the partitions
In the middle of re-formatting at the moment - just wondered if anyone had anu... (0 Replies)
Discussion started by: farmacy
0 Replies
5. UNIX for Dummies Questions & Answers
Forgive the sheer volume of verbiage:
Sco Openserver 6 - how to install Java 1.42_14b:
The documentation says:
"Make a subdirectory and unwind the tar file into that subdirectory.
mkdir JAVA142
cd JAVA142; tar -xf ../OSR6_Java2_142.VOLS.tar
Run the Software Manager with the command: ... (6 Replies)
Discussion started by: LetSco
6 Replies
6. SCO
Hi
Can any one suggest me how i will install SCO 5.0.5 on new server ML350 G5 as vendar says this machine is not compatable for SCO 5.0.5 this machine only can support SCO 5.0.7 but i dont want to install SCO 5.0.7 .
OR which machine is available in the market for SCO 5.0.5 .
Waiting for... (1 Reply)
Discussion started by: munirh
1 Replies
7. SCO
I just install UNIX SCO 5.0.7 on a new Proliant ML 350 G5 with hpsas driver on an smart array E200i, i just realized that it doesn have an scsi port for the tape unit (storageworks dat40), just add a scsi card 29320ALP pcix card, installed the ad320 driver downloaded from adaptec and from sco site,... (6 Replies)
Discussion started by: jactroo
6 Replies
8. SCO
Hi
I m trying to install SCo 5.0.5 on my laptop but it fails, I was able to install it on another computer and it did work, but with this IBM LENOVO R61 Laptop, it is giving me the message Memory error loading kernel, I searched the net concerning this issue and found that i have to write this... (1 Reply)
Discussion started by: bashar_smeirat
1 Replies
9. SCO
This is my first load of SCO OpenServer v5.0.7 on a HP ProLiant ML350 G6. When it asks me to identify the source media it can't find it no matter how I respond. The SCO compatible page says it used the on board SATA DVD-ROM on Port 2 of the embedded SATA controller with "Legacy IDE emulation (as... (8 Replies)
Discussion started by: farmboy
8 Replies
10. UNIX for Advanced & Expert Users
hi all
i have hp proliant ml350 g6 , i want install unixware 7.1.4 ,
i excute steps installation but an error ocured hard disk not found after completed install HBA DRIVER , when chnage using DCU utility from automatic to mannul some reseason like unkow device see must be configure
can you help... (1 Reply)
Discussion started by: eng.sami80
1 Replies
LEARN ABOUT DEBIAN
ex
EX(4) BSD/i386 Kernel Interfaces Manual EX(4) NAME
ex -- Ethernet device driver for the Intel EtherExpress Pro/10 and Pro/10+ SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file: device ex Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): if_ex_load="YES" DESCRIPTION
The ex driver provides support for Ethernet adapters based on the Intel i82595 chip. On the ISA bus, the card will be searched for in the I/O address range 0x200 - 0x3a0. The IRQ will be read from the EEPROM on the card. For correct operation Plug-N-Play support should be disabled. On the PC Card bus, the card will be automatically recognized and configured. HARDWARE
The ex driver supports the following Ethernet adapters: o Intel EtherExpress Pro/10 ISA o Intel EtherExpress Pro/10+ ISA o Olicom OC2220 Ethernet PC Card o Olicom OC2232 Ethernet/Modem PC Card o Silicom Ethernet LAN PC Card o Silicom EtherSerial LAN PC Card DIAGNOSTICS
ex%d: Intel EtherExpress Pro/10, address %6D, connector %s The device probe found an installed card, and was able to correctly install the device driver. ex%d: WARNING: board's EEPROM is configured for IRQ %d, using %d The device probe detected that the board is configured for a different interrupt than the one specified in the kernel configuration file. ex%d: invalid IRQ. The device probe detected an invalid IRQ setting. SEE ALSO
arp(4), netintro(4), ng_ether(4), ifconfig(8) HISTORY
The ex device driver first appeared in FreeBSD 2.2. AUTHORS
The ex device driver was written by Javier Martin Rueda. The PC Card attachment was written by Mitsuru ISAWAKI and Warner Losh. This manual page was written by David E. O'Brien. BUGS
Currently the driver does not support multicast. The Silicom EtherSerial card's serial port does not currently work. The Olicom OC2232 PC Card should work with the ex driver, but is cur- rently completely broken. BSD
July 16, 2005 BSD