veritas and nic cards Post: 302199348

10 More Discussions You Might Find Interesting

1. Solaris

NIC cards for sunblade 100

I need to add a PCI NIC to a sunblade 100 running solaris 8. Im new to this and was hoping someone could give me some card names and models which will work for this system and has a driver for this sparc system. thanks

2. IP Networking

Setup 2 NIC cards in one UNIX system

Hi; I have a UNIX box (SCO 5.0.2) with two (2) NIC cards. One card (NIC1) talks to a network 57.14.65.x/27. The other card NIC2) talks to users on 57.14.103.x and 57.14.105.x with subnet mask of 255.255.0.0. If I set NIC2 to this subnet mask (255.255.0.0) it seems like the NIC traffic is now...

3. HP-UX

routing issues with multiple NIC cards

I am running HP_UX 11.23 with 4 NIC cards (this is our TSM server) I have 4 subnets we are backing across. trying to keep traffic on their subnets. I only have one route statment should I add more. route add net 123.99.8.0 netmask 255.255.255.0 123.99.8.254 route add net 123.99.67.0 netmask...

4. Red Hat

External NIC cards not pinging with each other in RHEL 5.1

We have a setup of two nodes which has two NIC cards in each. One is built in and another is D-Link (external NIC card). We are unable to ping to the external NIC cards in both. Eg: Node A has two IPs 192.168.1.10 (eth0) and 192.168.2.10 (eth1) and Node B has two IPs 192.168.1.20 (eth0) and...

5. HP-UX

HP UX 9000 NIC CARDS

Hello, I am trying to move an HP UX from one locaion to another. The new location don't have any Fiber switches. On the back of my server I see 2 RJ 45 for console management the other for networking , the server also has a fiber NIC card. When I disconnec the fiber and want to user regular...

6. IP Networking

Best reference for understanding low level info on nic cards drivers and functionality

Hi, What is the best reference that gives in detail on nic cards configuration , assigning multiple ip addresses to a single interface, netlink library etc and all basic stuff at this level..? Thanks

7. Ubuntu

Help asap squid with 2 nic cards setup

I found an old post that talks about 2 nice cards and it is driven by the IP address .... but I didn't understand it because the 2 people skipped information for me the newbie.. Can someone help me... I have the proxy server setup and I believe I have enabled the 2nd nic card, I just need one...

8. Ubuntu

How do you setup 2 nic cards for squid Ubuntu server?

I have a made my squid proxy, I now have add another nic card to an old CPU using Ubuntu server 12.04. I have seen another post similar however I am new and did not understand some of it. Something about redirecting IP address and IP table? I don't know how to do this.:confused:

9. Linux

Add two different subnet public IPs to single NIC or two different NIC on same box

Hello Admins, My ask is how can I add two different subnet IPs to same box with two different gateways? The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware. How can I get connected...

10. UNIX for Beginners Questions & Answers

How to extend a disk in veritas volume manager in veritas cluster?

Hi Experts, I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system. #hastatus -sum -- System State Frozen A node1 running 0 A node2 running 0 -- Group State -- Group System Probed ...

LEARN ABOUT HPUX

vxinstall

vxinstall(1M)															     vxinstall(1M)

NAME

       vxinstall - menu-driven Veritas Volume Manager initial configuration procedure

SYNOPSIS

       vxinstall

DESCRIPTION

       The  vxinstall utility provides a menu driven interface to configure Veritas Volume Manager (VxVM).  If you install the Veritas Volume Man-
       ager software package using the operating system's package administration commands, you can run vxinstall to configure VxVM for initial use
       on your system.

       Note: If you use the Veritas software installation scripts, do not run this utility.

OPERATIONS

       Licensing
	    vxinstall  first asks if you want to view the Veritas licenses already installed on the system.  Answering "yes" is equivalent to exe-
	    cuting the vxlicrep command (see vxlicrep(1)).

	    You are then asked if you want to add licenses for other Veritas products.	Answering "yes" is equivalent  to  running  the  vxlicinst
	    command (see vxlicinst(1)).  and entering a license key.

       Enclosure-Based Naming
	    You  can choose whether you want to use disk access names that are based on the device names assigned by the operating system, or that
	    are based on names that you assign to enclosures.

       System-Wide Default Disk Group
	    You can enter the name for the default disk group (defaultdg).  This is an alias for the disk group name that should be assumed if the
	    -g	option is not specified to a command, or if the VXVM_DEFAULTDG environment variable is undefined.  By default, defaultdg is set to
	    nodg (that is, no disk group).

NOTES

       From release 4.0 of VxVM, it is no longer necessary to run vxinstall to configure the rootdg disk group.  Disks	and  disk  groups  may	be
       added  to  VxVM	by  running  commands such as vxdiskadm(1M) or by using the graphical user interface without first running vxinstall.  The
       operation of VxVM does not require any disk groups to have been configured, and a disk group named rootdg does not need to  be  present	on
       the system.  Any disk group may be configured as the default disk group that is to be used with VxVM commands.  Any disk group named rootdg
       has no special significance to VxVM. See the vxdg(1M) manual page for further details.

SEE ALSO

       vxdctl(1M), vxdg(1M), vxdiskadm(1M), vxintro(1M), vxlicinst(1), vxlicrep(1)

VxVM 5.0.31.1							    24 Mar 2008 						     vxinstall(1M)