veritas and nic cards Post: 302199336

10 More Discussions You Might Find Interesting

1. Solaris

NIC cards for sunblade 100

I need to add a PCI NIC to a sunblade 100 running solaris 8. Im new to this and was hoping someone could give me some card names and models which will work for this system and has a driver for this sparc system. thanks

2. IP Networking

Setup 2 NIC cards in one UNIX system

Hi; I have a UNIX box (SCO 5.0.2) with two (2) NIC cards. One card (NIC1) talks to a network 57.14.65.x/27. The other card NIC2) talks to users on 57.14.103.x and 57.14.105.x with subnet mask of 255.255.0.0. If I set NIC2 to this subnet mask (255.255.0.0) it seems like the NIC traffic is now...

3. HP-UX

routing issues with multiple NIC cards

I am running HP_UX 11.23 with 4 NIC cards (this is our TSM server) I have 4 subnets we are backing across. trying to keep traffic on their subnets. I only have one route statment should I add more. route add net 123.99.8.0 netmask 255.255.255.0 123.99.8.254 route add net 123.99.67.0 netmask...

4. Red Hat

External NIC cards not pinging with each other in RHEL 5.1

We have a setup of two nodes which has two NIC cards in each. One is built in and another is D-Link (external NIC card). We are unable to ping to the external NIC cards in both. Eg: Node A has two IPs 192.168.1.10 (eth0) and 192.168.2.10 (eth1) and Node B has two IPs 192.168.1.20 (eth0) and...

5. HP-UX

HP UX 9000 NIC CARDS

Hello, I am trying to move an HP UX from one locaion to another. The new location don't have any Fiber switches. On the back of my server I see 2 RJ 45 for console management the other for networking , the server also has a fiber NIC card. When I disconnec the fiber and want to user regular...

6. IP Networking

Best reference for understanding low level info on nic cards drivers and functionality

Hi, What is the best reference that gives in detail on nic cards configuration , assigning multiple ip addresses to a single interface, netlink library etc and all basic stuff at this level..? Thanks

7. Ubuntu

Help asap squid with 2 nic cards setup

I found an old post that talks about 2 nice cards and it is driven by the IP address .... but I didn't understand it because the 2 people skipped information for me the newbie.. Can someone help me... I have the proxy server setup and I believe I have enabled the 2nd nic card, I just need one...

8. Ubuntu

How do you setup 2 nic cards for squid Ubuntu server?

I have a made my squid proxy, I now have add another nic card to an old CPU using Ubuntu server 12.04. I have seen another post similar however I am new and did not understand some of it. Something about redirecting IP address and IP table? I don't know how to do this.:confused:

9. Linux

Add two different subnet public IPs to single NIC or two different NIC on same box

Hello Admins, My ask is how can I add two different subnet IPs to same box with two different gateways? The issue is I can connect to the box when I am on ethernet LAN, but I am not able to connect to the same IP when I am on wifi. The server is RHEL 7 VM on vmware. How can I get connected...

10. UNIX for Beginners Questions & Answers

How to extend a disk in veritas volume manager in veritas cluster?

Hi Experts, I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system. #hastatus -sum -- System State Frozen A node1 running 0 A node2 running 0 -- Group State -- Group System Probed ...

LEARN ABOUT OPENSOLARIS

chxge

chxge(7D)							      Devices								 chxge(7D)

NAME

       chxge - Chelsio Ethernet network interface controllers

SYNOPSIS

       /dev/chxge

DESCRIPTION

       The  chxge  Ethernet  driver  is  a   multi-threaded,  loadable,  clonable, STREAMS hardware driver supporting the connectionless Data Link
       Provider Interface, dlpi(7P), over Chelsio NIC controllers. Multiple (and  mixed) NIC controllers installed within  the	 system  are  sup-
       ported  by  the driver. The chxge driver provides basic support for the NIC hardware. Functions include chip initialization, frame transmit
       and receive, and error recovery and reporting.

APPLICATION PROGRAMMING INTERFACE

       The cloning, character-special device /dev/chxge is used to access NIC devices installed within the system.

CHXGE AND DLPI

       The chxge driver is dependent on /kernel/misc/gld, a loadable kernel  module  that  provides the chxge driver with  the	DLPI  and  STREAMS
       functionality required of a LAN driver. See gld(7D) for more details on the primitives supported by the driver.

       The values returned by the driver in the DL_INFO_ACK primitive in response to the DL_INFO_REQ are:

	   o	  Default Maximum SDU is 1500 (ETHERMTU).

	   o	  dlsap address length is 8.

	   o	  MAC type is DL_ETHER.

	   o	  The  sap  length value is  -2, meaning  the  physical address component is followed immediately by a 2-byte sap component within
		  the DLSAP address.

	   o	  Broadcast address  value is Ethernet/IEEE  broadcast address (FF:FF:FF:FF:FF:FF).

FILES

       /dev/chxge		    Character special device.

       /kernel/drv/sparcv9/chxge    SPARC chxge driver binary.

       /kernel/drv/chxge	    x86 platform kernel module. (32-bit).

       /kernel/drv/amd64/chxge	    x86 platform kernel module. (64-bit).

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |SPARC, x86		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       netstat(1M), attributes(5), gld(7D), dlpi(7P), gld(9F), gld_mac_info(9S)

SunOS 5.11							    17 Jan 2005 							 chxge(7D)