routeadm(1M)															      routeadm(1M)

NAME

       routeadm - IP forwarding and routing configuration

SYNOPSIS

       routeadm [-p]

       routeadm [-R root-dir] [-e  option...] [-d  option...] [-r  option...] [-s var=value]

       routeadm [-u]

       The  routeadm  command  is  used  to administer system-wide configuration for IP forwarding and routing. IP forwarding is the passing of IP
       packets from one network to another; IP routing is the use of a routing protocol to determine routes.

       routeadm is used to enable or disable each function independently, overriding any system default setting for each function.

       The first usage, above, reports the current configuration.

       The following command-line options are supported:

       -p

	   Print the configuration in parseable format.

       -R root-dir

	   Specify an alternate root directory where routeadm applies changes. This can be useful from within JumpStart scripts,  where  the  root
	   directory of the system being modified is mounted elsewhere.

	   Note -  The root file system of any non-global zones must not be referenced with the -R option. Doing so might damage the global zone's
		   file system, might compromise the security of the global zone,  and	might  damage  the  non-global	zone's	file  system.  See
		   zones(5).

       -e option...

	   Enable the specified option.

       -d option...

	   Disable the specified option.

       -r option...

	   Revert the specified option to the system default. The system defaults are specified in the description of each option.

       -u

	   Apply  the  currently configured options to the running system. Enable or disable IP forwarding, and/or launch or kill routing daemons.
	   It does not alter the state of the system for those settings that have been set to default. This option is meant to be used by adminis-
	   trators who do not want to reboot to apply their changes.

       -s var=value

	   Specify  string values for specific variables in a comma-separated list with no intervening spaces. If invalid options are specified, a
	   warning message is printed and the program exits. The following variables can be specified:

	   ipv4-routing-daemon=<full_path_to_routing_daemon>

	       Specifies the routing daemon to be started when ipv4-routing is enabled. The routing daemon specified must be an executable  binary
	       or shell-script.  Default: "/usr/sbin/in.routed"

	   ipv4-routing-daemon-args=<args>

	       Specifies the startup arguments to be passed to the ipv4-routing-daemon when ipv4-routing is enabled. Default: no arguments

	   ipv4-routing-stop-cmd=<command>

	       Specifies  the  command	to  be	executed  to stop the routing daemon when ipv4-routing is disabled. <command> may be an executable
	       binary or shell-script, or a string that can be parsed by system(3C). Default: "kill -TERM `cat /var/run/in.routed.pid`"

	   ipv6-routing-daemon=<full_path_to_routing_daemon>

	       Specifies the routing daemon to be started when ipv6-routing is enabled. The routing daemon specified must be an executable  binary
	       or shell-script.  Default: "/usr/lib/inet/in.ripngd"

	   ipv6-routing-daemon-args=<args>

	       Specifies the startup arguments to be passed to the ipv6-routing-daemon when ipv6-routing is enabled. Default: "-s"

	   ipv6-routing-stop-cmd=<command>

	       Specifies  the  command	to  be	executed  to stop the routing daemon when ipv6-routing is disabled. <command> can be an executable
	       binary or shell-script, or a string that can be parsed by system(3C). Default: "kill -TERM `cat /var/run/in.ripngd.pid`"

       Note that, if you change the routing daemon and stop commands from their defaults, routeadm does not monitor  these  daemons  or  commands.
       This  is because the status of these programs depends on user configuration. When non-default daemons or stop commands are in use, routeadm
       always returns a status of "unknown".

       Multiple -e, -d, and -r options can be specified on the command line. Changes made by -e, -d, and -r are persistent, but are not applied to
       the running system unless routeadm is called later with the -u option.

       Use the following options as arguments to the -e, -d, and -r options (shown above as option...).

       ipv4-forwarding

	   Controls  the global forwarding configuration for all IPv4 interfaces. The system default is disabled. If enabled, IP will forward IPv4
	   packets to and from interfaces when appropriate. If disabled, IP will not forward IPv4 packets to and from interfaces when appropriate.

       ipv4-routing

	   Determines whether or not an IPv4 routing daemon is run. The system default is enabled unless the /etc/defaultrouter  file  exists,	in
	   which case the default is disabled. The routing daemon for IPv4 is /usr/sbin/in.routed.

       ipv6-forwarding

	   Controls  the global forwarding configuration for all IPv6 interfaces. The system default is disabled. If enabled, IP will forward IPv6
	   packets to and from interfaces when appropriate. If disabled, IP will not forward IPv6 packets to and from interfaces when appropriate.

       ipv6-routing

	   Determines whether or not an  IPv6  routing	daemon	is  run.  The  system  default	is  disabled.  The  routing  daemon  for  IPv6	is
	   /usr/lib/inet/in.ripngd.  If  not  set, the system boot scripts' current default logic determines whether or not to run in.ripngd. Note
	   that even if this option is enabled, an IPv6 routing daemon will run only if ipv6-forwarding is enabled.

       The forwarding and routing settings are related but not mutually dependent. For example, a router will typically forward IP packets and use
       a  routing  protocol, but nothing would prevent an administrator from configuring a router that forwards packets and does not use a routing
       protocol.  In that case, the administrator would enable forwarding, disable routing, and populate the router's routing  table  with  static
       routes.

       The  forwarding	settings are global settings. Each interface also has an IFF_ROUTER forwarding flag that determines whether packets can be
       forwarded to or from a particular interface. That flag can be independently controlled by means of ifconfig(1M)'s router option.  When  the
       global  forwarding  setting  is	changed  (that is, -u is issued to change the value from enabled to disabled or vice-versa), all interface
       flags in the system are changed simultaneously to reflect the new global policy. Interfaces configured by means of DHCP automatically  have
       their interface-specific IFF_ROUTER flag cleared.

       When  a new interface is plumbed by means of ifconfig(1M), the value of the interface-specific forwarding flag is set according to the cur-
       rent global forwarding value. Thus, the forwarding value forms the "default" for all new interfaces.

       The following exit values are returned:

       0

	   Successful completion.

       !=0

	   An error occurred while obtaining or modifying the system configuration.

       Example 1: Enabling IPv4 Forwarding

       IPv4 forwarding is disabled by default. The following command enables IPv4 forwarding:

       example# routeadm -e ipv4-forwarding

       Example 2: Apply Configured Settings to the Running System

       In the previous example, a system setting was changed, but will not take effect until the next reboot unless a command such as the  follow-
       ing is used:

       example# routeadm -u

       Example 3: Making a Setting Revert to its Default

       To make the setting changed in the first example revert to its default, enter the following:

       example# routeadm -r ipv4-forwarding
       example# routeadm -u

       Example 4: Starting in.routed with the -q Flag

       The following sequence of commands starts in.routed with the -q flag:

       example# routeadm -s ipv4-routing-daemon-args="-q"
       example# routeadm -u

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Stable			   |
       +-----------------------------+-----------------------------+

       ifconfig(1M), in.routed(1M), gateways(4), attributes(5)

								    8 Apr 2005							      routeadm(1M)