Sponsored Content
Full Discussion: Disk Replacement SVM
Operating Systems Solaris Disk Replacement SVM Post 302197391 by hercu on Wednesday 21st of May 2008 01:14:15 AM
Old 05-21-2008
I have sued both! The trick is to use 'metareplace' in case the entire disk goes bad!! That is faster and works okay

If only some slices are bad, then you need to follow the 'tedious' procedure that you mentioned in the very first post.

Extra:
Concerning usuing the cfgadm command, I have seen most sun engineers not using them while many sys admins use that - may be for security / satisfaction sake. Remember, cfgadm will eb used if you have scsi disks on your machine. ** 'luxadm' command is used instead of cfgadm incase your machine has fiber channel disks. (To find out if your system has FCAL disks, run format command and see if there is a long series of numbers after t (target) of the disks).

Hope that helps Smilie
 

10 More Discussions You Might Find Interesting

1. Solaris

Disk replacement with svm

I dont even know what raid level this is, but its raid 5 mirrored from the looks of it. I have a failed disk (t12) within this mirror. What is the best way to replace this disk? 2 things concern me, isn't there a command to prepare the disk for a hot swap? and what should i do with the... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies

2. Solaris

Removing Disk from SVM

Hi All, I have to remove the disk from SVM. Kindly guide me or suggest me some link where in I can steps to remove SVM from Solaris 10 .Also I have one metaset which require deletion. Thanks in anticipation! (10 Replies)
Discussion started by: kumarmani
10 Replies

3. Solaris

Disk space missing under SVM

Hi Gurus, I've got an issue here: (1) Hardware: Sun NetraT1, (2) OS: Solaris 10, (3) SVM metastat shows /var having 12 GB. df shows /var having 4 GB. Real space for /var is about 4 GB since I can't move a big file to it. How is 8 GB space missing? Does /var/run swap need to account? Can I... (5 Replies)
Discussion started by: aixlover
5 Replies

4. Solaris

Root Disk mirroring in SVM

Dear All, Please help me to configure root mirroring using SVM in Solaris 9. Thanks and Regards, Lakkireddy BR (3 Replies)
Discussion started by: lbreddy
3 Replies

5. Solaris

Replacing a hard disk (SVM) with a soft partition?

The following is the summarry:- 1) Four disks in server ie (c1t0d0. c1t1d0, c1t2d0, c1t3d0). c1t2d0 is the disk to be replaced. c1t0d0 and c1t2d0 are mirrors. c1t1d0 and c1t3d0 are mirrors. Metadb to be deleted is in c1t2d0s7 a) Mirror d35 has 2 submirrors d38 and d39 d38 is a stripe... (0 Replies)
Discussion started by: aji1729
0 Replies

6. Solaris

Root disk mirroring in SVM

I tried doing rootdisk mirroring in my local host , i added a new Ide disk in my system and copied the prtvtoc from root disk to the newly added disk, and then when i tried to add database replicas on both the disks, it was added for boot disk but for the newly added disk i gave the error, which... (6 Replies)
Discussion started by: Laxxi
6 Replies

7. Solaris

Replacing a Disk in a ODS/SVM Mirror

Hi All BAsed on the below I would like to verifu two things (1) The udnerlying mirroris for '/mnt' na dit onlcy contaisne 1 sub-mirror, with one sliceon is one disk and hence, data loss on the mount point (the mount point, '/mnt' is backed up) (2) the Procedure for renewal # df -kh /mnt... (2 Replies)
Discussion started by: stevie_velvet
2 Replies

8. Solaris

Replacing a failed disk using SVM

Hi Please can you help me on replacing or removing a faulty disk drive on a SUN NETRA X4250server with 4 internal drives only. the format comand show me the following: format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0t0d0 <drive type unknown> ... (9 Replies)
Discussion started by: fretagi
9 Replies

9. Filesystems, Disks and Memory

DISK ARRAY PROTECTION SUSPENDED message displayed following disk replacement

Hello, On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active. We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED. ... (1 Reply)
Discussion started by: terrya
1 Replies

10. AIX

DISK ARRAY PROTECTION SUSPENDED message following disk replacement

Hello, On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active. We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED. ... (3 Replies)
Discussion started by: terrya
3 Replies
SVM(3)									 1								    SVM(3)

The SVM class

INTRODUCTION
CLASS SYNOPSIS
SVM SVM Constants o const integer$SVM::C_SVC0 o const integer$SVM::NU_SVC1 o const integer$SVM::ONE_CLASS2 o const integer$SVM::EPSILON_SVR3 o const integer$SVM::NU_SVR4 o const integer$SVM::KERNEL_LINEAR0 o const integer$SVM::KERNEL_POLY1 o const integer$SVM::KERNEL_RBF2 o const integer$SVM::KERNEL_SIGMOID3 o const integer$SVM::KERNEL_PRECOMPUTED4 o const integer$SVM::OPT_TYPE101 o const integer$SVM::OPT_KERNEL_TYPE102 o const integer$SVM::OPT_DEGREE103 o const integer$SVM::OPT_SHRINKING104 o const integer$SVM::OPT_PROPABILITY105 o const integer$SVM::OPT_GAMMA201 o const integer$SVM::OPT_NU202 o const integer$SVM::OPT_EPS203 o const integer$SVM::OPT_P204 o const integer$SVM::OPT_COEF_ZERO205 o const integer$SVM::OPT_C206 o const integer$SVM::OPT_CACHE_SIZE207 Methods o public SVM::__construct (void ) o public float svm::crossvalidate (array $problem, int $number_of_folds) o public array SVM::getOptions (void ) o public bool SVM::setOptions (array $params) o public SVMModel svm::train (array $problem, [array $weights]) PREDEFINED CONSTANTS
SVM CONSTANTS
o SVM::C_SVC -The basic C_SVC SVM type. The default, and a good starting point o SVM::NU_SVC -The NU_SVC type uses a different, more flexible, error weighting o SVM::ONE_CLASS -One class SVM type. Train just on a single class, using outliers as negative examples o SVM::EPSILON_SVR -A SVM type for regression (predicting a value rather than just a class) o SVM::NU_SVR -A NU style SVM regression type o SVM::KERNEL_LINEAR -A very simple kernel, can work well on large document classification problems o SVM::KERNEL_POLY -A polynomial kernel o SVM::KERNEL_RBF -The common Gaussian RBD kernel. Handles non-linear problems well and is a good default for classification o SVM::KERNEL_SIGMOID -A kernel based on the sigmoid function. Using this makes the SVM very similar to a two layer sigmoid based neural network o SVM::KERNEL_PRECOMPUTED -A precomputed kernel - currently unsupported. o SVM::OPT_TYPE -The options key for the SVM type o SVM::OPT_KERNEL_TYPE -The options key for the kernel type o SVM::OPT_DEGREE - o SVM::OPT_SHRINKING -Training parameter, boolean, for whether to use the shrinking heuristics o SVM::OPT_PROBABILITY -Training parameter, boolean, for whether to collect and use probability estimates o SVM::OPT_GAMMA -Algorithm parameter for Poly, RBF and Sigmoid kernel types. o SVM::OPT_NU -The option key for the nu parameter, only used in the NU_ SVM types o SVM::OPT_EPS -The option key for the Epsilon parameter, used in epsilon regression o SVM::OPT_P -Training parameter used by Episilon SVR regression o SVM::OPT_COEF_ZERO -Algorithm parameter for poly and sigmoid kernels o SVM::OPT_C -The option for the cost parameter that controls tradeoff between errors and generality - effectively the penalty for misclassifying training examples. o SVM::OPT_CACHE_SIZE -Memory cache size, in MB PHP Documentation Group SVM(3)
All times are GMT -4. The time now is 04:02 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy