NIM problem Post: 302189428

10 More Discussions You Might Find Interesting

1. AIX

migrate NIM server through NIM installation

I try to migrate a NIM server from one server to another. I try to do a mksysb on NIM server restore the NIM server's mksysb to a client through NIM installation shutdown NIM server start newly installed client as NIM server Does anyone do this before? who can give me some suggestion?

2. AIX

Nim Master Problem

All, I'm testing NIM on a 7026-m80 machine. But everytime i want to setup the master, i get this error message... Anyone who knows how to solve this issue? google doesn't seem to know much about it # nim_master_setup ############################## NIM master setup...

3. AIX

Problem with nim installation

Dear Frnz, I have a strange problem with nim installation. I am able to push the image from Nim server to the client and the Os is reinstalled successfully.But after the installation the client doesnt hold any host name or ip address.That is the host name is assigned as local host and ip is...

4. AIX

problem adding NIM client

Hello All, While trying to add NIM client to the NIM environment from NIM client machine, I get the following error: 1800-109 There are currently no additional SMIT screen entries available for this item. This may require installation of additional software before it can be accessed. ...

5. AIX

Back up a client NIM from nim master

Hello everyone Im trying to backup a nim client from nim master but I got this message COMMAND STATUS Command: failed stdout: yes stderr: no Before command completion, additional instructions may appear below. 0042-001 nim:...

6. AIX

For NIM: NFS file system problem

hello, i am trying to export a file system so that i can mount it on NIM server and make mksysb backup of the server on that fs. i get this message: mount: 1831-011 access denied for s_semdev:/dr_s_zeus/mksysb/dr_s_zeus mount: 1831-008 giving up on: s_semdev:/dr_s_zeus/mksysb/dr_s_zeus ...

7. AIX

NIM client boot problem

Hi all, I have created VIO Server which serves 3 lpars. All of them are on VLAN ID 50. From one lpar I installed and set up NIM master server called testAIX1. I have created client and allocated resources to it: testAIX1:/ > lsnim -l test_lpar test_lpar: class = machines ...

8. AIX

NIM : remove nim client info from the client

Hi. I change my client's IP and hostname but I forgot to change anything on the master. How can I redefine or modify my client's resource from my master, or with using smit niminit from my client ? Tks

9. AIX

Problem in communication nim client with nim master

Hello, I have an AIX6.1 machine which is a nim client to my nim master which is also AIX6.1 machine. I had some problem to perform an installation on my client using smit nim . i removed /etc/niminfo file in order to do the initialization again but when i run the command niminit -a name=client...

10. AIX

How to know NIM name from NIM client?

Friend's, I was playing around with NIM in my environment & had a quick question in mind which I didn't/couldn't find answer to, which is -- how to find the name of the NIM server sitting on the NIM client? All leads to the answer would be much appreciated, many thanks! -- Souvik

LEARN ABOUT DEBIAN

file2dgr

FILE2DGR(1)							  DGR executables						       FILE2DGR(1)

NAME

       file2dgr - DGR transmission test program

SYNOPSIS

       file2dgr remoteHostName fileName [nbrOfCycles]

DESCRIPTION

       file2dgr uses DGR to send nbrOfCycles copies of the text of the file named fileName to the dgr2file process running on the computer
       identified by remoteHostName.  If not specified (or if less than 1), nbrOfCycles defaults to 1.	After sending all lines of the file,
       file2dgr sends a datagram containing an EOF string (the ASCII text "*** End of the file ***") before reopening the file and starting
       transmission of the next copy.

       When all copies of the file have been sent, file2dgr prints a performance report:

	       Bytes sent = I<byteCount>, usec elapsed = I<elapsedTime>.

	       Sending I<dataRate> bits per second.

EXIT STATUS

       0   file2dgr has terminated.

FILES

       No configuration files are needed.

ENVIRONMENT

       No environment variables apply.

DIAGNOSTICS

       Diagnostic messages produced by file2dgr are written to the ION log file ion.log.

       Can't open dgr service.
	   ION system error.  Check for earlier diagnostic messages describing the cause of the error; correct problem and rerun.

       Can't open input file
	   Operating system error.  Check errtext, correct problem, and rerun.

       Can't acquire DGR working memory.
	   ION system error.  Check for earlier diagnostic messages describing the cause of the error; correct problem and rerun.

       Can't reopen input file
	   Operating system error.  Check errtext, correct problem, and rerun.

       Can't read from input file
	   Operating system error.  Check errtext, correct problem, and rerun.

       dgr_send failed.
	   ION system error.  Check for earlier diagnostic messages describing the cause of the error; correct problem and rerun.

BUGS

       Report bugs to <ion-bugs@korgano.eecs.ohiou.edu>

SEE ALSO

       file2dgr(1), dgr(3)

perl v5.14.2							    2012-05-25							       FILE2DGR(1)