According with your answers I understood is that I won't be able to start Xserver if I don't have any graphics card or another aditional software that help me to emulate this...
If I install a graphic card how do I start o restart the process o Xserver on Solaris 8?
I have a SuSE8.1 Linux box running as a testing webserver to my small network. It's administered through ssh and webmin entirely, and doesn't have a monitor.
I could really do with the graphics card for another machine, but if I take it out, I can't start the machine up.
Any ideas how I can... (6 Replies)
I've recently patched my AIX box from ML02 to ML06 and somehow along the way the monitor no longer starts up in GUI mode.
Running the command xinit gives me the following errros
ioctl Bad file Number
1356- Unable to start the X server
I've checked the path variables, the monitor, the lai0... (0 Replies)
Hello there!
Can anybody help me with regards to the driver of GXT250P graphics adapter. I have searched the web for the fileset devices.pci.14103c00 however no success was found. My current AIX version is 4.1.5 and my machine is 7043-140. My installation AIX CD is not working anymore, so I... (0 Replies)
Hi All -
I looked through this forum and a couple of other places without success. Maybe someone here can help. I very recently came into possession of a p520, a 9131-52A. It arrived without documentation, mouse, keyboard, or graphics card.
I managed to get ASMI to work on both DB-9 ports... (6 Replies)
I am on an HP C8000 running B.11.11, I have no idea how to tell what graphics card I have...and the amount of memory it has, driver, etc. Also, how do I tell how much ram the box itself has, and other memory information like swap and processor speed and all that. Any help out there for me? ... (1 Reply)
Hi Gurus,
I'm trying to install Oracle on HP-UX 11.23. The Oracle installer needs an X server running on the box. You then start an X client on your PC, export the DISPLAY on UNIX and the installer displays on your PC. The problem is that my HP boxes do not have graphics cards installed. ... (6 Replies)
Hi Guys,
Anyone know any commands to verify the graphics card is installed correctly on an M4000?
show-displays just comes back and echoes nothing.
Also there is on input-device or output-device variable when you run printenv.
This in itself is worrying.
Any advice would be... (4 Replies)
Hi Guys,
I am working on the e25k server.
There is 4 domain configured
Once domain is down
So I tried to access the console for the problem domain.
using console -d B
but its showing following error message.
bash-2.05$ console -d B
Domain administration permissions... (3 Replies)
I am trying to install this NVIDIA-Linux 64-260.19.04.run graphics card, it is a GeForce GTX460 EVGA. I have tried all the commands to turn off the Xserver yes I can get it off yes I can get to root prompt or sudo prompt in home directory but every time I use the sh NVIDIA-Linux 64-260.19.04.run... (0 Replies)
Discussion started by: jackdevon
0 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)