According with your answers I understood is that I won't be able to start Xserver if I don't have any graphics card or another aditional software that help me to emulate this...
If I install a graphic card how do I start o restart the process o Xserver on Solaris 8?
With this command is correct?
The Xcliente could be restarted with this command?
I have a SuSE8.1 Linux box running as a testing webserver to my small network. It's administered through ssh and webmin entirely, and doesn't have a monitor.
I could really do with the graphics card for another machine, but if I take it out, I can't start the machine up.
Any ideas how I can... (6 Replies)
I've recently patched my AIX box from ML02 to ML06 and somehow along the way the monitor no longer starts up in GUI mode.
Running the command xinit gives me the following errros
ioctl Bad file Number
1356- Unable to start the X server
I've checked the path variables, the monitor, the lai0... (0 Replies)
Hello there!
Can anybody help me with regards to the driver of GXT250P graphics adapter. I have searched the web for the fileset devices.pci.14103c00 however no success was found. My current AIX version is 4.1.5 and my machine is 7043-140. My installation AIX CD is not working anymore, so I... (0 Replies)
Hi All -
I looked through this forum and a couple of other places without success. Maybe someone here can help. I very recently came into possession of a p520, a 9131-52A. It arrived without documentation, mouse, keyboard, or graphics card.
I managed to get ASMI to work on both DB-9 ports... (6 Replies)
I am on an HP C8000 running B.11.11, I have no idea how to tell what graphics card I have...and the amount of memory it has, driver, etc. Also, how do I tell how much ram the box itself has, and other memory information like swap and processor speed and all that. Any help out there for me? ... (1 Reply)
Hi Gurus,
I'm trying to install Oracle on HP-UX 11.23. The Oracle installer needs an X server running on the box. You then start an X client on your PC, export the DISPLAY on UNIX and the installer displays on your PC. The problem is that my HP boxes do not have graphics cards installed. ... (6 Replies)
Hi Guys,
Anyone know any commands to verify the graphics card is installed correctly on an M4000?
show-displays just comes back and echoes nothing.
Also there is on input-device or output-device variable when you run printenv.
This in itself is worrying.
Any advice would be... (4 Replies)
Hi Guys,
I am working on the e25k server.
There is 4 domain configured
Once domain is down
So I tried to access the console for the problem domain.
using console -d B
but its showing following error message.
bash-2.05$ console -d B
Domain administration permissions... (3 Replies)
I am trying to install this NVIDIA-Linux 64-260.19.04.run graphics card, it is a GeForce GTX460 EVGA. I have tried all the commands to turn off the Xserver yes I can get it off yes I can get to root prompt or sudo prompt in home directory but every time I use the sh NVIDIA-Linux 64-260.19.04.run... (0 Replies)
Discussion started by: jackdevon
0 Replies
LEARN ABOUT HPUX
xserver
Xserver(1) General Commands Manual Xserver(1)NAME
X - X Window System display server dispatcher
SYNOPSIS
X [ option ...]
DESCRIPTION :
Hewlett-Packard supports two X servers on HP-UX platforms, the Xhp X server which supports HP VISUALIZE graphics devices and the Xf86 X
server which supports all other graphics devices. These X servers are delivered as /usr/bin/X11/Xhp and /usr/bin/X11/Xf86.
The X dispatcher determines which X server to launch based on the available graphics devices. The control file /etc/X11/Xstart can provide
additional guidance to the X dispatcher. The control file allows the user to specify which X server to start for given display connection
numbers. The only X servers supported by the X dispatcher are Xhp, Xf86 and Xvfb. If no Xstart file exists, the dispatcher loads the
appropriate X server for the graphics device in the system. HP-UX does not deliver the /etc/X11/Xstart file. This file can be created by
using the SAM/SMH utility.
OPTIONS
If the X dispatcher is invoked with no arguments, the display connection is assumed to be :0. The X dispatcher checks for display connec-
tion options and, if found, uses that display connection number when it checks the Xstart file. All other options are passed on to the X
server when it is started and it is the X server's responsibility to validate these options. Not all options may be supported on both X
servers; refer to Xhp(1) and Xf86(1) to verify supported options for each X server.
RETURN VALUE
None
Xstart EXAMPLES
The control file syntax is the X server to start followed by the display connection number. Valid entries take the form of:
Xhp :0 Start the Xhp X server on display connection 0
Xf86 :10 Start the Xf86 X server on display 10
/usr/bin/X11/Xhp :5 Start the Xhp X server on display connection 5
/usr/bin/X11/Xvfb :7 Start the X Virtual Framebuffer server on display connection 7
FILES
/etc/X11/Xstart Dispatcher control file.
/var/X11/Xserver/logs/Xstartup.N.log X dispatcher log file for display N.
SEE ALSO X(1), Xhp(1), Xf86(1)STANDARDS CONFORMANCE
See the appropriate section in Xhp(1) or Xf86(1).
Xserver(1)