I have two issues with this script.
1. I cannot seem to get my counters to count correctly.
2. My function to eject to CAP1 or CAP2 is hung in a loop and doens't exit back to the previous function. I would like to be able to select which cap to eject to . Each cap holds only 40 tapes, so when one becomes full, I want to be able to eject to the next.
Thanks

I'd appreciate some help.



# This scripts ejects IP tapes from the STK9310 silo via ACSLS Commands from plebsb01.
# Scripter : 1/31/07
#!/bin/ksh
#set -x
rpt=/export/home/legato/tapemgr/rpts/offsite
dat=`date +"%m%d%y"`
rdat=`date +"%b%d%y_%H%M%S"`
EJECTED_TAPES="$rpt/ejected/eject_tapes_test.041608"
OFFSITE_RPT="$rpt/Offsite.rpt.041608"
EJECT_LOG=$rpt/ejected/ejected_tape.status.log.041608
TOT_TAPE_CT_EJECTED=0
TAPE_CT=0
CAP_TOTAL=40
EJECT40=ejectupto40.log
cat /dev/null > $EJECT040


#--------------------------------------
# L O C A L F U N C T I O N S . . .
#--------------------------------------

EJECT_CAP1()
{
echo "Ejecting to CAP 0,2,1"
# /opt/OMIdtelm/bin/eject_vol -t 3600 -c 0,2,1 -l $EJECTED_TAPES | tee $EJECT_LOG;
echo "Ejecting Completed"
}
EJECT_CAP1()
{
echo "Ejecting to CAP 0,2,2"
# /opt/OMIdtelm/bin/eject_vol -t 3600 -c 0,2,2 -l $EJECTED_TAPES | tee $EJECT_LOG;
echo "Ejecting Completed"
}

#---------------------- EJECT TO CAP FUNCTION ROUTINE ---------------------------
#

EJECT_TO_CAP()
{
echo "EJECT_TO_CAP Routine _ List of tapes to be ejected to cap 0,2,1"; cat $EJECT40
TOT_TAPE_CT_EJECTED=`cat $EJECT40 | wc -l` ; echo $TOT_TAPE_CT_EJECTED
echo " CURRENT tapes Ejected $TAPE_CT of $TOT_TAPES_TO_EJECT"; sleep 1

echo "Select TAPE CAP TO Eject to: Enter 1 for CAP1 or 2 for CAP2 (1,2)"; read cap_option
echo $cap_option
case $cap_option in
1) EJECT_CAP1 ;;
2) EJECT_CAP2 ;;
*) echo "Invalid Selection - Please Re-enter"
esac
cat $EJECT40 >> TAPES_EJECTED.log
cat /dev/null >$EJECT40
sleep 5
}

#------------------------------------------- MAIN ROUTINE
#------------------------------------------

TAPE_ROUTINE ()
{
while read volume until EOF
do
#TAPE_CT=`expr $TAPE_CT + 1`
echo " In tape routine volume ejected $volume TAPE $TAPE_CT of $TOT_TAPES_TO_EJECT"
if [ $TAPE_CT != $CAP_TOTAL ]
then
echo $volume >> $EJECT40
else
echo $volume >> $EJECT40
echo "$TAPE_CT of $TOT_TAPES_TO_EJECT Tapes Ejected CAP is FULL";
EJECT_TO_CAP
TAPE_CT=0
fi
TAPE_CT=`expr $TAPE_CT + 1`
done < $EJECTED_TAPES
EJECT_TO_CAP

TOT_TAPE_CT_EJECTED=`expr $TAPE_CT + $TOT_TAPES_TO_EJECT`
echo " END of Tape Routine .. Total Tapes Ejected >>> $TOT_TAPES_TO_EJECT of $TOT_TAPE_CT_EJECTED"

echo "Total tapes ejected: $TOT_TAPE_CT_EJECTED" >> TAPES_EJECTED.log
mv TAPES_EJECTED.log TOT_TAPES_EJECTED.rpt.$rdat
}


#--------------------------------------
# M A I N . . .
#--------------------------------------
cat $EJECTED_TAPES
TOT_TAPES_TO_EJECT=`cat $EJECTED_TAPES |wc -l`
echo "Total Tapes to eject is: $TOT_TAPES_TO_EJECT ";
echo " Is this the correct list of tapes to eject (y/n)?"
read option
case $option in
y|Y) TAPE_ROUTINE;;
n|N) exit
esac

exit 0