04-16-2008
Quote:
I did this a couple of weeks ago, and as I recall, all I did was run 'mkdev hd'.
It complained that hardware was automatically recognized, and then went directly into divvy.
That just it! Divvy does not send the table to the second RAID diskete. It ends with a "I/O" error. What next?
9 More Discussions You Might Find Interesting
1. SCO
Just recently my hard drive has started to pulse like data is being read or written constantly. Causes? (2 Replies)
Discussion started by: jimser
2 Replies
2. SCO
Hi!
Sorry, but I am'not spesialist in SCO OpenServer. I need to add hard disk from SCO Open Server ( "a") in my SCO OpenServer 5.6. I need data from "a". When I added, I see only swap disk, and didn't see root file system. I need to add IDE and SCSI
Please, help me. How right to add disk?... (0 Replies)
Discussion started by: fedir
0 Replies
3. UNIX for Dummies Questions & Answers
:confused: ........I have a new hard drive and I need to copy ALL info from the old to the new. I would like to use the dd command. I know the command is as follows......
dd if=/dev/rdsk/c1t1d0s0 of=/dev/rdsk/????????
Where I have the question marks is the problem.
How do I find out what the... (4 Replies)
Discussion started by: shorty
4 Replies
4. SCO
Does anyone remrmber what the maximum hard drive size is for SCO 5.0.5?
Also, do I need to plug in the Cylinders/Heads/Sectors manually?
I know in ver 5.0.7, you can go over 137GB.
TiA (0 Replies)
Discussion started by: tbgeek
0 Replies
5. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
6. AIX
Good day,
I have an rs/6000 server, model 7044-270. I bought a 2nd hard drive for it but im not sure its the right one. (fru:H13060) As you surely know, the 7044-270 hard drives are put in some sort of tray/carrier. There is a cable that will interface the HDD with the tray/carrier so the... (0 Replies)
Discussion started by: Netghost
0 Replies
7. Solaris
I have a hard drive that we are trying to jumpstart in a sunblad 1500. we keep getting errors. I placed the drive in my 1500. I want to wipe the drive clean because for some reason it has a partition table. and when i go to format and try to format the drive it says it can not use a program. is... (5 Replies)
Discussion started by: deaconf19
5 Replies
8. SCO
Situation - i have an IDE hard drive from server apparently running SCO last used in 2003. No access to computer it was formerly in. I need to access the drive to pull off data files from a billing/scheduling program. I have no SCO machine or access to one atm. Have some limited Linux... (3 Replies)
Discussion started by: lordlars1
3 Replies
9. Red Hat
I am running FC-7 which I realize is an older distro. But my question would apply to any distro.
I ran fsck on my mounted file system (I know, I shouldn't have). Now it won't boot. I get a kernel panic message.
I booted to a Knoppix Live Cd.
The desktop icon shows /dev/sda2 mounted at... (4 Replies)
Discussion started by: 2buck56
4 Replies
LEARN ABOUT DEBIAN
raidfile.conf
RAIDFILE.CONF(5) Box Backup RAIDFILE.CONF(5)
NAME
raidfile.conf - Userland RAID for Box Backup
SYNOPSIS
/etc/box/raidfile.conf
DESCRIPTION
The raidfile.conf is usually generated by raidfile-config(8) but may be manually edited if the store locations move or if more than one
disc set is required.
discX
Specifies a set of discs.
SetNumber
The set number of the RAID disc, referenced by each account.
BlockSize
The block size of the file system (usually 2048). Under BSD with FFS, set this to your file system's fragment size (most likely an
8th of the block size).
Dir0
The first directory in the RAID array.
Dir1
The second directory in the RAID array. If you do not wish to use the built-in RAID functionality, this field should be set to the
same as Dir0. You should not use the built-in RAID if you have a hardware RAID solution or if you're using another type of software
RAID (like md on Linux).
Dir2
The third directory in the RAID array. The same notes that apply to Dir2 also apply to Dir3.
FILES
/etc/box/raidfile.conf
SEE ALSO
raidfile-config(8), bbstored.conf(5)
AUTHORS
Ben Summers
Per Thomsen
James O'Gorman
Box Backup 0.11 10/28/2011 RAIDFILE.CONF(5)