How to install openserver 6 on X3650 Post: 302186019

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

SCO openserver 5 install problem

Hello all, I'm trying to install SCO openserver 5 on a 2.5 Gig hard drive, and I tried fdisk and a low-level format of the drive. When I insert the boot diskette all seems fine, and it asks me to set the cd-rom and it sees it and reads from it. Well, I'm thinking all is well until right after I...

2. SCO

IBM X3650 install unixware 7.1.4

Dear everyone: Who can tell me the IBM X3650 7979-101 how to install sco unixware 7.1.4?

3. SCO

Openserver 6.0 Install Issue

I am having issues with installing Openserver 6.0 on newer servers, such as most of the newer Dell Poweredge servers (ie R210, T310, etc..), where the USB keyboard will not function through the install process. I can put an already-installed drive in the system from a compatible system, and the...

4. SCO

Install SCO Openserver 5.0.7 as a trial

hi Howto install SCO Openserver 5.0.7 as a trial or howto get a trial license number?

5. SCO

Install NIC on SCO openserver 5.0.2

Hi I am trying to install NIC FastNic 10/100 PCI Ethernet driver into PCI# 3 of the GA-SIML Rev 1.0 Motherboard on 1GB Hard-disk driveI have following the instruction on the CD-Disk and when I added NIC by netconfig and I do not know what is the following question: PCI BUS# DEVICE#...

6. SCO

Help to install foxpro 2.5 on openserver 6.0.0.

Can anyone help me to install foxpro 2.5 for unix openserver 6.0.0. I recently updtae my server from 5.0.7 to 6.0.0. to get an usb tape working, but can't install or run foxpro 2.5, all the programs run on it, need help. thanks or if anyone had a version tested of foxpro on openserver 6.0.0....

7. SCO

Need help to install sco openserver 5

Hi, Im installing sco openserver 5 (OpenServer-5.0.7Hw-10Jun05_1800.iso) on a vmware server 1.0.4. Installation is ok but on when x server is loading i just can login, mouse does not move and most of keyboard cases do not respond. I choose usb mouse + french keyboard while installating, should i...

8. SCO

install iperf on SCO OpenServer 5.0.7

hi Howto install iperf on SCO OpenServer 5.0.7?

9. SCO

Install Hang OpenServer 6 - SATA CDROM

Hi all Can anybody offer any help with installing Openserver 6 on a Supermicro server? I am familiar with installing OS5, but this is my first time with v6. The PC is fitted with Supermicro X8DTL-I Dual Xeon motherboard and 2 Xeon E5620 processors, and 16Gb Ram, LSI MegaRaid SAS8708 8 port...

10. SCO

How install curl in openserver 5.0.7?

Hello, I wanted to know how to install the service "CURL" for UNIX OpenServer 5.0.7 I need to connect a web service even government to generate an electronic invoice. Sorry for my English, the forum is excellent but my English is not. I hope the comments thank you very much:b::b::b::b::b::b:

LEARN ABOUT LINUX

grub-install

GRUB-INSTALL(8) 					  System Administration Utilities					   GRUB-INSTALL(8)

NAME

       grub-install - install GRUB to a device

SYNOPSIS

       grub-install [OPTION] install_device

DESCRIPTION

       Install GRUB on your drive.

       -h, --help
	      print this message and exit

       -v, --version
	      print the version information and exit

       --modules=MODULES
	      pre-load specified modules MODULES

       --boot-directory=DIR
	      install GRUB images under the directory DIR/grub instead of the /boot/grub directory

       --grub-setup=FILE
	      use FILE as grub-setup

       --grub-mkimage=FILE
	      use FILE as grub-mkimage

       --grub-mkrelpath=FILE
	      use FILE as grub-mkrelpath

       --grub-mkdevicemap=FILE use FILE as grub-mkdevicemap

       --grub-probe=FILE
	      use FILE as grub-probe

       --no-floppy
	      do not probe any floppy drive

       --allow-floppy
	      Make the drive also bootable as floppy (default for fdX devices). May break on some BIOSes.

       --recheck
	      probe a device map even if it already exists

       --force
	      install even if problems are detected

       --disk-module=MODULE
	      disk module to use

       INSTALL_DEVICE can be a GRUB device name or a system device filename.

       grub-install copies GRUB images into /boot/grub, and uses grub-setup to install grub into the boot sector.

REPORTING BUGS

       Report bugs to <bug-grub@gnu.org>.

SEE ALSO

       grub-mkconfig(8), grub-mkimage(1), grub-setup(8), grub-mkrescue(1)

       The full documentation for grub-install is maintained as a Texinfo manual.  If the info and grub-install programs are properly installed at
       your site, the command

	      info grub-install

       should give you access to the complete manual.

grub-install (GRUB) 1.99-12ubuntu5				   October 2011 						   GRUB-INSTALL(8)