Hi, I have a Unix box running HP-UX 10.20 and it suddenly won't boot. Every time it goes down the boot checklist, it hangs on "NFS client subsystem" and just continues to say busy/wait. I have read something about the /etc/auto_master but don't quite understand what has to happen to fix it. ... (4 Replies)
aix 4.3
I get the following error from the errpt log
BD797922 0306170008 P H enclosure0 SUBSYSTEM FAILURE
I'm not clear on this kind of error. It never happened to me.
What do this errors mean, and how do I clear or solve them?
Any help is appreciated. (2 Replies)
Hello,
I'm trying to generate a subsystem which supports startsrc, stopsrc and refresh
I want to specify special arguments in case of stopsrc and refresh
for example:
startsrc:
/bin/testscript start
stopsrc:
/bin/testscript stop
refresh:
/bin/testscript restart
which should be... (0 Replies)
Hey Guys ...
How I can look up Subsystem ID of the WIFI card under Ubuntu...
I did try lspci but its outputting only Vendor and Dev no subsys ...
I need same data as below ( Windows )
PCI\VEN_168C&DEV_001C&SUBSYS_04281468&REV_01\4&1BF192B7&0&0020
thank you
happy new year ! (2 Replies)
All,
I enabled PAM and aged a password, but when I login it asks me for the current password then says password unchanged after entering the current password. Is this a bug? My security dept is going to want me to enable password aging and I'm stuck!
Any help on what the issu is?
... (6 Replies)
I have several ssh servers *running aix 5.3 and they respond to sftp requests just fine, but I have one that requires clients to specify the path to the sftp server using the -s flag which is*/usr/sbin/sftp-server
I check the sshd_config across all servers and they are the same. *The other... (1 Reply)
Recently moved a HP Unix B.10.20 system from US to Thailand, and everything is work well in US but after we changed:
1. set_parms ip_address (change the IP to TH range)
2. set_parms addl_netwrk (change the Subnet, Gateway, Domain name, DNS Svr Name, and DNS IP)
3. vi /etc/hosts (to commented... (4 Replies)
Discussion started by: beta911
4 Replies
LEARN ABOUT SUSE
idiff
IDIFF(1) General Commands Manual IDIFF(1)NAME
idiff - compare two images
SYNOPSIS
idiff [options] image1 image2
DESCRIPTION
The idiff utility is invoked as follows:
idiff [options] image1 image2
Where input1 and input2 are the names of two image files that should be compared. They may be of any format recognized by OpenImageIO
(i.e., for which image-reading plugins are available).
If the two input images are not the same resolutions, or do not have the same number of channels, the comparison will return FAILURE imme-
diately and will not attempt to compare the pixels of the two images. If they are the same dimensions, the pixels of the two images will be
compared, and a report will be printed including the mean and maximum error, how many pixels were above the warning and failure thresholds,
and whether the result is PASS, WARNING, or FAILURE. For example:
$ idiff a.jpg b.jpg
Comparing "a.jpg" and "b.jpg"
Mean error = 0.00450079
RMS error = 0.00764215
Peak SNR = 42.3357
Max error = 0.254902 @ (700, 222, B)
574062 pixels (82.1%) over 1e-06
574062 pixels (82.1%) over 1e-06
FAILURE
The "mean error" is the average difference (per channel, per pixel). The "max error" is the largest difference in any pixel channel, and
will point out on which pixel and channel it was found. It will also give a count of how many pixels were above the warning and failure
thresholds.
The metadata of the two images (e.g., the comments) are not currently compared; only differences in pixel values are taken into considera-
tion.
For a complete description, see /usr/share/doc/libopenimageio-dev/openimageio.pdf.gz.
OPTIONS --help Print help message
-v Verbose status messages
-a Compare all subimages/miplevels
Thresholding and comparison options
-fail %g
Failure threshold difference (0.000001)
-failpercent %g
Allow this percentage of failures (0)
-hardfail %g
Fail if any one pixel exceeds this error (infinity)
-warn %g
Warning threshold difference (0.00001)
-warnpercent %g
Allow this percentage of warnings (0)
-hardwarn %g
Warn if any one pixel exceeds this error (infinity)
-p Perform perceptual (rather than numeric) comparison
Difference image options
-o %s Output difference image
-od Output image only if nonzero difference
-abs Output image of absolute value, not signed difference
-scale %g
Scale the output image by this factor
SEE ALSO iconvert(1), igrep(1), iinfo(1), iprocess(1), iv(1), maketx(1), oiiotool(1).
AUTHOR
OpenImageIO was written by Larry Gritz and the other authors and contributors.
This manual page was written by IRIE Shinsuke <irieshinsuke@yahoo.co.jp>, for the Debian project (and may be used by others).
May 19, 2012 IDIFF(1)