NETKEY-TOOL(1)							   OpenSC Tools 						    NETKEY-TOOL(1)

NAME

       netkey-tool - administrative utility for Netkey E4 cards

SYNOPSIS

       netkey-tool [OPTIONS] [COMMAND]

DESCRIPTION

       The netkey-tool utility can be used from the command line to perform some smart card operations with NetKey E4 cards that cannot be done
       easily with other OpenSC-tools, such as changing local PINs, storing certificates into empty NetKey E4 cert-files or displaying the initial
       PUK-value.

OPTIONS

       --help, -h
	   Displays a short help message.

       --pin pin-value, -p pin-value
	   Specifies the current value of the global PIN.

       --puk pin-value, -u pin-value
	   Specifies the current value of the global PUK.

       --pin0 pin-value, -0 pin-value
	   Specifies the current value of the local PIN0 (aka local PIN).

       --pin1 pin-value, -1 pin-value
	   Specifies the current value of the local PIN1 (aka local PUK).

       --reader number, -r number
	   Use smart card in specified reader. Default is reader 0.

       -v
	   Causes netkey-tool to be more verbose. This options may be specified multiple times to increase verbosity.

PIN FORMAT

       With the -p, -u, -0 or the -1 one of the cards pins may be specified. You may use plain ascii-strings (i.e. 123456) or a hex-string (i.e.
       31:32:33:34:35:36). A hex-string must consists of exacly n 2-digit hexnumbers separated by n-1 colons. Otherwise it will be interpreted as
       an ascii string. For example :12:34: and 1:2:3:4 are both pins of length 7, while 12:34 and 01:02:03:04 are pins of length 2 and 4.

COMMANDS

       When used without any options or commands, netkey-tool will display information about the smart cards pins and certificates. This will not
       change your card in any aspect (assumed there are no bugs in netkey-tool). In particular the tries-left counters of the pins are
       investigated without doing actual pin-verifications.

       If you specify the global PIN via the --pin option, netkey-tool will also display the initial value of the cards global PUK. If your global
       PUK was changed netkey-tool will still display its initial value. There's no way to recover a lost global PUK once it was changed. There's
       also no way to display the initial value of your global PUK without knowing the current value of your global PIN.

       For most of the commands that netkey-tool can execute, you have to specify one pin. One notable exeption is the nullpin command, but this
       command can only be executed once in the lifetime of a NetKey E4 card.

       cert number filename
	   This command will read one of your cards certificates (as specified by number) and save this certificate into file filename in
	   PEM-format. Certificates on a NetKey E4 card are readable without a pin, so you don't have to specify one.

       cert filename number
	   This command will read the first PEM-encoded certificate from file filename and store this into your smart cards certificate file
	   number. Some of your smart cards certificate files might be readonly, so this will not work with all values of number. If a certificate
	   file is writable you must specify a pin in order to change it. If you try to use this command without specifying a pin, netkey-tool
	   will tell you which one is needed.

       change { pin | puk | pin0 | pin1 } new-pin
	   This changes the value of the specified pin to the given new value. You must specify either the current value of the pin or another pin
	   to be able to do this and if you don't specify a correct one, netkey-tool will tell you which one is needed.

       nullpin initial-pin
	   This command can be executed only if the global PIN of your card is in nullpin-state. There's no way to return back to nullpin-state
	   once you have changed your global PIN. You don't need a pin to execute the nullpin-command. After a succesfull nullpin-command
	   netkey-tool will display your cards initial PUK-value.

       unblock { pin | pin0 | pin1 }
	   This unblocks the specified pin. You must specify another pin to be able to do this and if you don't specify a correct one, netkey-tool
	   will tell you which one is needed.

SEE ALSO

       opensc-explorer(1)

AUTHORS

       netkey-tool was written by Peter Koch <pk_opensc@web.de>.

opensc								    06/17/2014							    NETKEY-TOOL(1)