Helo.
I think the simplest way to do so is a SSH tunnel (assuming you have openssh installed ). For instance:
will forward connections on 199.1.77.2:3000 to 199.1.88.3:3000
Regards.
Last edited by grial; 03-26-2008 at 05:38 AM..
Reason: changed tou use your IP/Ports
I've been googling for a while now, trying to forward port 3000 to port 80....
In the past I used to DLink router to forward port 3000 to 80. I recently finished (well, is it ever done anyhow?) setting up my linux box and got it acting as a router.
I want to continue to run Apache on port 80... (1 Reply)
Hi,
I have to install an application that has a built in tftp server. Tftp comes in on port 69. As i am not installing this application as a root user i am running into trouble because only the root user can listen to ports < 1024. So changing the port i listen to to one greater than 1023 isn't... (1 Reply)
Hi
I want to set up port forwarding from one network to another network. I already have this configured on the Linux box using iptables.
iptables -t nat -A PREROUTING -p tcp -i eth1 --dport 1521 -j DNAT --to 10.218.146.230
iptables -A FORWARD -p tcp -i eth1 -d 10.218.146.230 -j ACCEPT
... (2 Replies)
Hi,
I am looking out a way to forward all UDP traffic coming on ports 3001,3002,3003 and 3004 on server 10.2.45.200
to
corresponding ports of server 10.2.45.197.
I am using Solaris 10.0.
-bash-3.00$ uname -a
SunOS airtelussd2 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V445
Is... (6 Replies)
Hi; I have the following issue:
I have a Solaris server running an old applications which connects to an http server in other server at certain port. The thing is that the http server has changed its ip and port and the addres in the app is hard coded and touching the app by now is out of the... (0 Replies)
Hi Linux/Unix Guru,
I am setting Linux Hopping Station to another different servers.
My current config to connect to another servers is using different port to connect.
e.g
ssh -D 1080 -p 22 username@server1.com
ssh -D 1081 -p 22 username@server2.com
Now what I would like to have... (3 Replies)
hi guys
i have a simple question !
i have two ips . a valid and internal(172.16.11.2)
i want to use port forwarding to forward any request to valid IP port 8001 to internal ip port 80 .
i use this rule :
sysctl -w net.ipv4.ip_forward=1
iptables -t nat -A PREROUTING -p tcp... (1 Reply)
Hi experts,
We have windows machine ( A ) in one network & 2 Linux Servers ( B & C ) in another network. There is a firewall between these 2 networks and SSH (TCP/22) & HTTPS (TCP/443) are allowed from A to B only (but not to C). There is no personal firewall / iptables running on any machine.... (1 Reply)
Hello Gurus,
I have configured port forwarding at router.
But after configuration I am not able to connect the computer from outside/Over internet/Remote desktp from other computer.
Could you please advice?
Thanks-
Pokhraj (2 Replies)
Hello All,
I would like to ask you very kindly with /etc/sysconfig/iptables file
I have to setup port forwarding on RHEL6 router. Users from public network must be able to ssh to servers in private network behind RHEL6 router. Problem is that servers in private network must be isolated.
My... (2 Replies)
Discussion started by: oidipus
2 Replies
LEARN ABOUT SUSE
corosync-objctl
COROSYNC-OBJCTL(8) System Manager's Manual COROSYNC-OBJCTL(8)NAME
corosync-objctl - Configure objects in the Object Database
SYNOPSIS
corosync-objctl [-c|-w|-d|-a|-t-h] <OBJECT-SPEC>...
DESCRIPTION
corosync-objctl is used to configure objects within the object database at runtime.
OBJECT-SPEC
There are two types of entities
Objects and Key=Value pairs
Objects
Objects are container like entities that can hold other entities. They are specified as "objectA"."objectB". An example is log-
ging.logger.
Key=Value pairs
These are the entities that actually hold values (read database "fields"). They are specified as object.key=value or just
object.key if you are reading.
OPTIONS -c Create a new object.
-d Delete an existing object.
-w Use this option when you want to write a new value to a key.
-a Display all values currently available.
-t Track changes to an object and it's children. As changes are made to the object they are printed out. this is kind of like a "tail
-f" for the object database.
-h Print basic usage.
EXAMPLES
Print the objOne object (shouldn't exist yet).
$ corosync-objctl objOne
Create the objOne object.
$ corosync-objctl -c objOne
Print the objOne object (empty).
$ corosync-objctl objOne
objOne
Write two new keys to the objOne object.
$ corosync-objctl -w objOne.max=3000 objOne.min=100
Print the objOne object (with the two new keys).
$ corosync-objctl objOne
objOne.min=100
objOne.max=3000
Delete the objOne.min key
$ corosync-objctl -d objOne.min=100
Prove that is gone.
$ corosync-objctl objOne
objOne.max=3000
Delete the whole objOne object.
$ corosync-objctl -d objOne
Prove that is gone.
$ corosync-objctl objOne
SEE ALSO confdb_initialize(3),
AUTHOR
Angus Salkeld
2008-07-29 COROSYNC-OBJCTL(8)