03-25-2008
Quote:
Originally Posted by
jwholey
One states: "must be something wrong with machine",
hm, this meant only that the reason is not something in AIX but in your machine. "wrong" was probably a stretch. For instance, hdisk devices (which are similar insofar as several equivalent ones are usually there) aren't changing every reboot either.
Maybe there is some script which deletes and reconfigures the devices upon (re)-boot time for some unknown reason?
bakunin
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Following the below info:
----------------------------------------------------------------------------------
# SYNTAX: /dev/rmt/<unit number><density>
· Density: l, m, h, u/c (low, medium, high, ultra/compressed, respectively)
· BSD behavior: (optional) b
· no rewind: (optional) n
· For... (5 Replies)
Discussion started by: guest100
5 Replies
2. Solaris
hi all ,
i have just installed solris 9 on a sun 280R ,and i have appleid the recommended patches .
after the installation i have found that /dev/rmt/ directory is empty , i thought that was normal , so i attached my DDS4 external tape drive and treid :
devfsadm -C
devfsadm -v
reboot --... (1 Reply)
Discussion started by: ppass
1 Replies
3. AIX
Hi.
After the shutdown for SWIFT Alliance Server, tape backup process will be done. Unfortunately, I encountered this error message when I performed the database tape backup. The error was "/dev/rmt 0.1 block size is 0; variable; must be 1024 fixed. Consider reconfiguration through 'chdev'... (2 Replies)
Discussion started by: MariaLuisa
2 Replies
4. Solaris
Hi Guys,
I a newbie in Unix environment. I need a help to detect my external SCSI tape drive. I tried with command drvconfig;devlinks;tapes.. but when I go to /dev/rmt/, the directory is still empty.
I also tried with add_drv -v st but I'm getting this message
# add_drv -v st
exit... (8 Replies)
Discussion started by: akuslive
8 Replies
5. Solaris
I have an HP Proliant DL380 with Intel Processors that I recently loaded Solaris 10 with latest patches on it. I'm trying to do a ufsdump to an HP DAT 40 tape drive via SCSI, but I can't get it to do anything because /dev/rmt is empty. I've tried the following with luck:
touch /reconfigure,... (7 Replies)
Discussion started by: cvaughn
7 Replies
6. Hardware
# mt stat
HP DDS-4 DAT (Sun) tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0
mt -f /dev/rmt/0mn erase
/dev/rmt/0mn: write protected or reserved.
Getting error while ufsdump ....
--- Dumping / to /dev/rmt/0mn ---
DUMP: Date... (1 Reply)
Discussion started by: vickyingle5
1 Replies
7. Solaris
# mt stat
HP DDS-4 DAT (Sun) tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0
mt -f /dev/rmt/0mn erase
/dev/rmt/0mn: write protected or reserved.
Getting error while ufsdump ....
--- Dumping / to /dev/rmt/0mn ---
DUMP: Date... (5 Replies)
Discussion started by: vickyingle5
5 Replies
8. AIX
Hello,
I attached a tape drive to one of my partitions but i cannot find the device.
I run the command lsdev|grep rmt but i dont get anything in return.
When i run lsslot -c slot i can see the slot number and the device that belongs to the tape drive but i cannot find any rmt files in /dev.... (6 Replies)
Discussion started by: omonoiatis9
6 Replies
9. Solaris
Hi Peeps,
Got a very wierd problem (not a show stopper, but really annoying).
I've recovered a system for a DR test and by the looks of it every night (between 1030 and 11pm) it's creating a file called 1hbn in /dev/rmt and literally looks like it's utilizing all the remaining space in /... (2 Replies)
Discussion started by: callmebob
2 Replies
10. HP-UX
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Discussion started by: anuragr
4 Replies
LEARN ABOUT CENTOS
usb-devices
usb-devices(1) Linux USB Utilities usb-devices(1)
NAME
usb-devices - print USB device details
SYNOPSIS
usb-devices
DESCRIPTION
usb-devices is a (bash) shell script that can be used to display details of USB buses in the system and the devices connected to them.
The output of the script is similar to the usb/devices file available either under /proc/bus (if usbfs is mounted), or under /sys/ker-
nel/debug (if debugfs is mounted there). The script is primarily intended to be used if the file is not available.
In contrast to the usb/devices file, this script only lists active interfaces (those marked with a "*" in the usb/devices file) and their
endpoints.
Be advised that there can be differences in the way information is sorted, as well as in the format of the output.
RETURN VALUE
If sysfs is not mounted, a non-zero exit code is returned.
FILES
/sys/bus/usb/devices/usb*
The part of the sysfs tree the script walks through to assemble the printed information.
/proc/bus/usb/devices
Location where the usb/devices file can normally be found for Linux kernels before 2.6.31, if usbfs is mounted.
/sys/kernel/debug/usb/devices
Location where the usb/devices file can normally be found for Linux kernel 2.6.31 and later, if debugfs is mounted.
SEE ALSO
lsusb(8), usbview(8).
AUTHORS
Greg Kroah-Hartman <greg@kroah.com>
Randy Dunlap <rdunlap@xenotime.net>
Frans Pop <elendil@planet.nl>
usbutils-007 23 June 2009 usb-devices(1)