Installing SCO OpenServer v5.07 on an HP ML350 G5 server
Hi there
We are trying to install SCO OpenServer v5.07 on an HP ML350 G5 server.
I have downloaded the drivers from HP's website, but are getting nowhere. (I feel that I am going round in circles - every time I google for the drivers, I end up here.)
What happens is we create the driver disks successfully, and when sco boots, we type in the following bootstring :
Everything goes well, we are prompted to insert the stiffy with the driver, it loads the driver, and then tells us that there is a clash with the character major - we can either proceed with the new default of 9, or reinstall the driver.
The install program comes up, asks you for the keyboard layout, and the license number and license code. Then it terminates with the message that there is no root device.
Also, we have created the array with the HP array configuration utility, so there is a logical drive.
Hi,
i have 4 Unix Sco openservers, 4PCs running windows 2000, and 1 PC with windows server which i want to configure in the same network.
During the configuration procedure, the wizard of Windows 2000 SERVER ask you if this is the only server in the network, now it will be the only WINDOWS... (2 Replies)
Hi Guys,
I want ur replies very very Urgently.Plz. don't ignore this mail.
I am using Sco openserver 5.0.2 and i have downloaded jdk1.2.2
for that i have installed it.The jdk is working fine.
Then i download jakarta-tomcat-4.1.24.zip and i have installed it.
In order... (1 Reply)
Dear members
when i installed dual processor patch in openserver 5.0.7 in hp ML370 G4 server it hangs in sco at G_hd_config.
i tried MP4, EFS 5.64,5.70A but not solved the problem.. (0 Replies)
Trying to install Sco OSR 6.0 on Dell Optiplex with SERIAL ATA ADADPTEC 1210SA controller.
Sco says its sipported by the AACRAID driver but on installation its says that it doesnt recognise the partitions
In the middle of re-formatting at the moment - just wondered if anyone had anu... (0 Replies)
Forgive the sheer volume of verbiage:
Sco Openserver 6 - how to install Java 1.42_14b:
The documentation says:
"Make a subdirectory and unwind the tar file into that subdirectory.
mkdir JAVA142
cd JAVA142; tar -xf ../OSR6_Java2_142.VOLS.tar
Run the Software Manager with the command: ... (6 Replies)
Hi
Can any one suggest me how i will install SCO 5.0.5 on new server ML350 G5 as vendar says this machine is not compatable for SCO 5.0.5 this machine only can support SCO 5.0.7 but i dont want to install SCO 5.0.7 .
OR which machine is available in the market for SCO 5.0.5 .
Waiting for... (1 Reply)
I just install UNIX SCO 5.0.7 on a new Proliant ML 350 G5 with hpsas driver on an smart array E200i, i just realized that it doesn have an scsi port for the tape unit (storageworks dat40), just add a scsi card 29320ALP pcix card, installed the ad320 driver downloaded from adaptec and from sco site,... (6 Replies)
Hi
I m trying to install SCo 5.0.5 on my laptop but it fails, I was able to install it on another computer and it did work, but with this IBM LENOVO R61 Laptop, it is giving me the message Memory error loading kernel, I searched the net concerning this issue and found that i have to write this... (1 Reply)
This is my first load of SCO OpenServer v5.0.7 on a HP ProLiant ML350 G6. When it asks me to identify the source media it can't find it no matter how I respond. The SCO compatible page says it used the on board SATA DVD-ROM on Port 2 of the embedded SATA controller with "Legacy IDE emulation (as... (8 Replies)
hi all
i have hp proliant ml350 g6 , i want install unixware 7.1.4 ,
i excute steps installation but an error ocured hard disk not found after completed install HBA DRIVER , when chnage using DCU utility from automatic to mannul some reseason like unkow device see must be configure
can you help... (1 Reply)
Discussion started by: eng.sami80
1 Replies
LEARN ABOUT HPUX
clone
clone(7) Miscellaneous Information Manual clone(7)NAME
clone - opens a major and minor device pair on a STREAMS driver
DESCRIPTION
The driver is a "pass through" device driver that allows other drivers to select unique minor device numbers on each In effect, the driver
passes an open operation through to the other driver. This mechanism allows for multiple instantiations of a driver, each with a different
minor number, through a single device file.
When the driver is opened, it is passed a major and minor device number by the operating system. The major number is the driver's major
number (72), and the minor number is the major number of the driver the user wishes to clone (referred to here as the target driver). The
driver calls the open routine of the target driver with the flag which specifies a clone open. The target driver's open routine allocates
an unused minor number. The target driver must use to make a new device number for the newly created device, and must set to the new
device number returned by The new device number is returned to the open through The open then returns to the user a file descriptor that
points to the new instantiation of the target driver.
The driver is an example of a clonable driver.
Notes
It is not possible to do multiple opens of a device with the same major and minor number using the driver. This is because the driver is
only given the major number of the driver to be cloned, and that driver will then select a minor number which has not been opened.
When called with a pathname which corresponds to the clonable driver, will return different results than when it is called on a file
descriptor returned from of the same clonable driver pathname.
RETURN VALUES
If the driver is given an invalid minor number, or if the driver indicated is not a clonable driver, the fails and is set to [ENXIO].
SEE ALSO open(2), fstat(2).
clone(7)
03-14-2008
