03-12-2008
hi ShanMilo,
I'm sorry to say there's no helpful information on /proc/mdstat
I've done a lot of dig into google, as well as on sun and red hat, but nothing useful.
I'm a returning sys admin to linux, and need to refresh my knowledge.
Any other ideas?
Thanks,
Alex.
9 More Discussions You Might Find Interesting
1. Solaris
I dont even know what raid level this is, but its raid 5 mirrored from the looks of it.
I have a failed disk (t12) within this mirror. What is the best way to replace this disk? 2 things concern me, isn't there a command to prepare the disk for a hot swap? and what should i do with the... (3 Replies)
Discussion started by: BG_JrAdmin
3 Replies
2. Solaris
Hello,
Can someone advise the proper procedure for replacing a mirrored disk in SVM. I have checked the docs and various websites but the procedure seems to vary. This is what I would do...
1. Remove the db replicas from the bad disk.
2. Detach it from the mirror
3. Clear it with... (4 Replies)
Discussion started by: Actuator
4 Replies
3. SCO
hi
I've a fresh installation of SCO 5.0.7 on the IDE hard disk.
For SCSI hard disk I can declare, for example blc disk driver using:
# mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk? (3 Replies)
Discussion started by: ccc
3 Replies
4. Linux
Hi all,
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
Discussion started by: shen747
23 Replies
5. Solaris
Hi all...I have an old Sun Ultra 2 running SunOS 5.7 (I know old). These machines have 2 hard drives and one of my drives fried. I bought some replacement drives and wanted to a simple "dd" command from my one good drive to copy all to the new replacement drive. The new drives however give me a... (11 Replies)
Discussion started by: psantinello
11 Replies
6. Solaris
Hello,
I have a Sparc system with encapsulated disks.
Because of disk errors I had to replace rootdisk,
I did it with
vxdiskadm 4)
replacement, vxdctl disable/enable,
vxdiskadm 5)
After it it the system boot failed, dropped back to the ok> prompt, message was:
The file... (0 Replies)
Discussion started by: ggi
0 Replies
7. AIX
Hi,
One of my disk is in 'disk missing state'. It is a sharedVG and cluster nodes.
The errpt keeps reporting stale partition error.
lvs are in open/stale state.
In this sceanario is replacing the disk the best practice?
When i do a lsdev the disk is labelled as below.
hdisk3 Available ... (2 Replies)
Discussion started by: ElizabethPJ
2 Replies
8. Filesystems, Disks and Memory
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (1 Reply)
Discussion started by: terrya
1 Replies
9. AIX
Hello,
On 4/20/2018, we performed a disk replacement on our IBM 8202 P7 server. After the disk was rebuilt, the SAS Disk Array sissas0 showed a status of degraded. However, the pdisks in the array all show a status of active.
We did see a message in errpt. DISK ARRAY PROTECTION SUSPENDED.
... (3 Replies)
Discussion started by: terrya
3 Replies
LEARN ABOUT SUSE
cpufreq-info
cpufreq-info(1) cpufreq-info(1)
NAME
cpufreq-info - Utility to retrieve cpufreq kernel information
SYNTAX
cpufreq-info [options]
DESCRIPTION
A small tool which prints out cpufreq information helpful to developers and interested users.
OPTIONS
-c --cpu <CPU>
<CPU> number which information shall be determined about.
-e --debug
Prints out debug information.
-f --freq
Get frequency the CPU currently runs at, according to the cpufreq core.
-w --hwfreq
Get frequency the CPU currently runs at, by reading it from hardware (only available to root).
-l --hwlimits
Determine the minimum and maximum CPU frequency allowed.
-d --driver
Determines the used cpufreq kernel driver.
-p --policy
Gets the currently used cpufreq policy.
-g --governors
Determines available cpufreq governors.
-a --related-cpus
Determines which CPUs run at the same hardware frequency.
-a --affected-cpus
Determines which CPUs need to have their frequency coordinated by software.
-s --stats
Shows cpufreq statistics if available.
-y --latency
Determines the maximum latency on CPU frequency changes.
-o --proc
Prints out information like provided by the /proc/cpufreq interface in 2.4. and early 2.6. kernels.
-m --human
human-readable output for the -f, -w, -s and -y parameters.
-h --help
Prints out the help screen.
REMARKS
You can't specify more than one of the output specific options -o -e -a -g -p -d -l -w -f -y.
You also can't specify the -o option combined with the -c option.
FILES
/sys/devices/system/cpu/cpu*/cpufreq/
/proc/cpufreq (deprecated)
/proc/sys/cpu/ (deprecated)
AUTHORS
Dominik Brodowski <linux@brodo.de> - author
Mattia Dongili<malattia@gmail.com> - first autolibtoolization
SEE ALSO
cpufreq-set(1)
Mattia Dongili 0.1 cpufreq-info(1)