i'm a relative newbie to unix (i'm on OSX) and i have a specific problem i'm tripped up on:
i'm piping the output of top (in log format) into an awk command which formats the information (and eventually will send it out continuously via udp/osc to another app). my problem is with what comes up... (4 Replies)
#!/bin/sh
echo `date +%F:%T` >> top.out
echo `top -n1` >> top.out
Hi all, i am trying to capture the output of the 'top' command in linux.
when i run the command manually, it works.
However, when i run it as a cronjob,the 'top' output is not being printed to the file,only the date is... (1 Reply)
Hey guys,
I'm trying to merge the output from the ps and top commands; since I need the full command used (only showed in the ps), and the cpu usage with some decimal numbers (i.e.: 0.05%, only showed in top).
After exporting to different files, I was thinking of doing an egrep with the... (0 Replies)
Hi all, I'd like to capture the output from the 'top' command to monitor my CPU and Mem utilisation.Currently my command isecho date
`top -b -n1 | grep -e Cpu -e Mem` I get the output in 3 separate lines.Tue Feb 24 15:00:03
Cpu(s): 3.4% us, 8.5% sy .. ..
Mem: 1011480k total, 226928k used, ....... (4 Replies)
Hi,
I have a system under test, and I use a script that does a ps.
The output, is in the following format, it's basically the timestamp, followed by the rss and vsize.
09:03:57 68404 183656 68312 181944 69860 217360 67536 182564 69072 183172 69032 199276
09:04:27 68752 183292 70000 189020... (5 Replies)
Hi,
I've installed SMCtop on to a Solaris 9 sparc server and I am trying to capture the output of top to a file without success. The version of top I have installed is top-3.6.1-sol9-sparc-local.gz. All my attempts are below.
# /usr/local/bin/top -d 5 -f /tmp/top.out... (3 Replies)
ok, so I have a script im running on a linux box that uses "egrep" a lot. now, when i run this script, i check the TOP to see how much system resource it is using.
the "top" command gives the following output:
last pid: 25384; load avg: 1.06, 1.04, 0.76; up 351+06:30:24 ... (0 Replies)
Solaris experts,
Am struggling, and wondering for the past more than one week that, how to calculate the total available and used memory/swap space.
Finally installed and used top & got some understanding, but while cross-checking, there are mismatches.
Main Memory
top o/p - 2GB... (7 Replies)
Guys can you help me fix this parse error.
Here's my script.
#!/bin/bash
# Set up limit below
NOTIFY="6.0% us 6.1% us 6.2% us 6.3% us 6.5% us 6.6% us 6.7% us 6.8% us 6.9% us 7.0% us"
# CPU Usage every minute
TOP="$(top -b -n2 -d 00.20 |grep Cpu|tail -1 | awk -F ":" '{ print $2 }' | cut... (3 Replies)
Hi ,
i am trying to set up an alert, when CPU usage (0.2%us in below output) is more than 40%
top | head | grep '^Cpu'
Cpu(s): 0.2%us, 0.2%sy, 0.0%ni, 99.1%id, 0.6%wa, 0.0%hi, 0.0%si, 0.0%st
using CUT, i pulled the value 0.2 and assigned to CPU (variable)
CPU=$(expr `top | head -10... (5 Replies)
Discussion started by: Prateek007
5 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)