Connecting to the service processor? Post: 302166094

Sponsored Content

Operating Systems AIX Connecting to the service processor? Post 302166094 by shaell on Monday 11th of February 2008 01:18:27 AM

02-11-2008

Registered User

Quote:

Originally Posted by bakunin

The IBM cable is crossed out, so you need a "nullmodem" cable. I'm not sure about the 44p using 19200,N,1,p or 9600,N,1,p as interface settings. The older machines used 9600 baud, the newer ones use 19200, but i am not sure to which group the 44p belongs to. One of these settings it is for sure.

You can find a pinout schema here.

I hope this helps.

bakunin

edit: oh, and its half past 9 over here - i sincerely apologize for having been asleep for so long on a saturday and not having responded earlier to your question. The next time i expect a question from you I'll stay up the night.

Hey thanks for the info. Especially for the sarcasm. I did realize that it was the weekend. But when i saw that there were 25 views and no replies, being a newbie i genuinely wondered whether my question made any sense. I did not mean to come off as a jerk in any way. Sorry to bother you. Thanks again for making the newcomers feel welcome.

shaell

View Public Profile for shaell

Find all posts by shaell

6 More Discussions You Might Find Interesting

1. HP-UX

Service processor not responding

I am receiving messages from HP-UX Server "The operating system is unable to communicate with the service processor. The support bus which connects the system processors, the service processor and the Power Monitor or Platform Monitor may have become hung ". I need help in the following:...

2. AIX

connecting to service processor on 44P 170

I dont have an ascii terminal to hook upto this thing, trying to use my laptop but it doesnt seem to want to communicate, is there a special cable i should be using for this?

3. AIX

LPAR processor/virtual processor settings

Question is on setting of Physical and Virtual processors for LPARs to make proper use of virtualization capabilities. Environment is a 8-way p570 with 4 LPARs. lparVIO1 and lparVIO2: AIX 5300-04-01 Mode/Type= Shared-SMT/Capped Minimum Processors= 0.10 Desired Processors= 0.50 Maximum...

4. AIX

Processor and processor core

Guys... Hows it going??? I have been going through the hardware spec of IBM system p systems.. and here i am confused for IBM Power 520 Express it says Processor cores: One, two or four 64-bit 4.2 GHz POWER6 with AltiVec� SIMD and Hardware Decimal Floating-Point acceleration ...

5. AIX

p520 Service Processor's IP

picked up this old p520 , try many ways to connect to the SP.. a) null modem using a PC connecting to the lower S1 ...but see a bunch of garbages across the screen once the main machine is off b) try guessing the default IPs 192.168.3.147 and 192.168.2.147, for ports HMC1 and HMC2 no...

6. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT DEBIAN

liebert

LIEBERT(8)							    NUT Manual								LIEBERT(8)

NAME

       liebert - Driver for Liebert contact-closure UPS equipment

NOTE

       This man page only documents the hardware-specific features of the liebert driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

       This driver supports some Liebert UPS equipment with a contact-closure interface. This includes the UPStation GXT2 with their
       contact-closure cable. The smart mode ("Multilink") cable is not supported by this driver.

EXTRA ARGUMENTS

       This driver does not support any extra settings in the ups.conf(5).

BUGS

       This driver does not yet support shutdowns by raising DTR. Be aware that shutdowns are not possible with the stock contact-closure cable.
       You may have to build another cable with DTR connected through to the UPS for it to work.

       There is no way for this driver to detect the hardware or cable. It will start up successfully even if no UPS is present. This is a
       fundamental limitation of any contact-closure driver.

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Network UPS Tools						    05/21/2012								LIEBERT(8)