02-06-2008
Assuming that both machines had the same host adapter:
Change the SCSI address on the second hd so that is different from the boot disk. Check SCSI termination. Add a write protect jumper if this is available.
Boot the machine with both disks installed.
Run 'mkdev hd'
Enter the info for the second drive, rebuild the kernel, and reboot.
Run 'mkdev hd' again, entering the same info as before.
This time fdisk and divvy will be run.
You should not have to change anything in fdisk.
Be EXTREMELY careful in divvy. You can erase everything in seconds!
Do not change any FS types, start or end addresses, or create any new file systems.
Use the 'n' option to rename the file systems so that they do not conflict with the names on the primary drive. (eg change root to oldroot, u to oldu, etc).
Run scoadmin->filesystems, and mount the filesystems that you require.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
thank u very much, (1 Reply)
Discussion started by: coralsea
1 Replies
2. UNIX for Dummies Questions & Answers
hi friends,
one of my clnts wants his Hard drive to be ugrded . He is currently using SCO unix 5.04 on a 4.3 Gig SCSI drive. He wants me to upgrd it to 18 Gigs . All he wants is that the data / programs / userfiles shall be intact. he has 3 user slices /user1, /user2 , /user3 presently... (3 Replies)
Discussion started by: /etc/passwd
3 Replies
3. UNIX for Dummies Questions & Answers
I have installed perc 2 raid card .in installiation , one is install whole for unix file system,and other select "do not modify"
after installiation ,how to use another ? add filesystem ?how to? (2 Replies)
Discussion started by: luckylwf
2 Replies
4. Shell Programming and Scripting
Hi Engg. ! :mad:
I have a harddisk on which SCO UNIX Open Server was installed. There was some data (in .dbf format) on it. Present condition of HDD is that it is not booting. Now I want to mount this HDD through other HDD on which SCO UNIX Open Server is installed by attaching... (0 Replies)
Discussion started by: Niraj Gopal Sha
0 Replies
5. AIX
I have some problem to add a fujitsu Model MAT3147NC on my Aix 5.1 Server. When i run the cfgmrg command and after de lspv command, i can see my disk but i think it's missing some drivers to get operational.
Thank's for your help. (0 Replies)
Discussion started by: sdulude01
0 Replies
6. UNIX for Dummies Questions & Answers
hey guys this is my problem I have SCO unix installed on a IDE h/drive. I want to add a SCSI hard drive, how do i do that within UNIX (1 Reply)
Discussion started by: kwame.neilsen
1 Replies
7. Solaris
Hi all,
I am not sure I am in the correct forum or not, but I would appreciate if somebody from here can help me out.
My processing equipment currently is using Unltra5 SunOs 5.6 with 8.6 GB hard disk, newer UltraSPARC SunOS 5.8 is with higher hard disk capacity. I am wondering how much hard... (2 Replies)
Discussion started by: uvex
2 Replies
8. SCO
My boss get a Proliant ML 330 G3 server with IDE ARRAY Bus, I try to isntall UNIX 5.0.7 on it but i't didn't detect as a hdd, I try to configure it as single logical drive and many combinations but UNIX always says taht there is no hdd, does anyone knows how to?? the boss of course won't say it... (0 Replies)
Discussion started by: jactroo
0 Replies
9. Filesystems, Disks and Memory
Any recommend manufacturers for an internal SCSI tape drive in my FreeBSD 7.0 home server? Besides RAID-1, I'm not backing-up, but man, are they expensive! What makes a tape drive so darn pricy? There is no way I can afford a new drive so I'll start looking on eBay and craigslist to see if there... (3 Replies)
Discussion started by: Aaron Van
3 Replies
10. AIX
how will you add new new HDD to server and explain the HDD installation procedure? (2 Replies)
Discussion started by: gopikumar
2 Replies
SD(4) Linux Programmer's Manual SD(4)
NAME
sd - driver for SCSI disk drives
SYNOPSIS
#include <linux/hdreg.h> /* for HDIO_GETGEO */
#include <linux/fs.h> /* for BLKGETSIZE and BLKRRPART */
CONFIGURATION
The block device name has the following form: sdlp, where l is a letter denoting the physical drive, and p is a number denoting the parti-
tion on that physical drive. Often, the partition number, p, will be left off when the device corresponds to the whole drive.
SCSI disks have a major device number of 8, and a minor device number of the form (16 * drive_number) + partition_number, where drive_num-
ber is the number of the physical drive in order of detection, and partition_number is as follows:
partition 0 is the whole drive
partitions 1-4 are the DOS "primary" partitions
partitions 5-8 are the DOS "extended" (or "logical") partitions
For example, /dev/sda will have major 8, minor 0, and will refer to all of the first SCSI drive in the system; and /dev/sdb3 will have
major 8, minor 19, and will refer to the third DOS "primary" partition on the second SCSI drive in the system.
At this time, only block devices are provided. Raw devices have not yet been implemented.
DESCRIPTION
The following ioctls are provided:
HDIO_GETGEO
Returns the BIOS disk parameters in the following structure:
struct hd_geometry {
unsigned char heads;
unsigned char sectors;
unsigned short cylinders;
unsigned long start;
};
A pointer to this structure is passed as the ioctl(2) parameter.
The information returned in the parameter is the disk geometry of the drive as understood by DOS! This geometry is not the physical
geometry of the drive. It is used when constructing the drive's partition table, however, and is needed for convenient operation of
fdisk(1), efdisk(1), and lilo(1). If the geometry information is not available, zero will be returned for all of the parameters.
BLKGETSIZE
Returns the device size in sectors. The ioctl(2) parameter should be a pointer to a long.
BLKRRPART
Forces a reread of the SCSI disk partition tables. No parameter is needed.
The SCSI ioctl(2) operations are also supported. If the ioctl(2) parameter is required, and it is NULL, then ioctl(2) will fail
with the error EINVAL.
FILES
/dev/sd[a-h]: the whole device
/dev/sd[a-h][0-8]: individual block partitions
COLOPHON
This page is part of release 3.53 of the Linux man-pages project. A description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 2012-05-03 SD(4)