BATCTL(8)						B.A.T.M.A.N. Advanced Control Tool						 BATCTL(8)

NAME

       batctl - B.A.T.M.A.N. advanced control and management tool

SYNOPSIS

       batctl [batctl-options] command [command-options]

DESCRIPTION

       batctl offers a convenient way to configure the batman-adv kernel module as well as displaying debug information such as originator tables,
       translation tables and the debug log. In combination with a bat-hosts file batctl allows the use of host names instead of MAC addresses.

       B.A.T.M.A.N. advanced operates on layer 2. Thus all hosts participating in the virtual switched network are transparently connected
       together for all protocols above layer 2. Therefore the common diagnosis tools do not work as expected. To overcome these problems batctl
       contains the commands ping, traceroute, tcpdump which provide similar functionality to the normal ping(1), traceroute(1), tcpdump(1) com-
       mands, but modified to layer 2 behaviour or using the B.A.T.M.A.N. advanced protocol.

OPTIONS

       batctl-options:
	      -m     specify mesh interface (default 'bat0')
	      -h     print general batctl help
	      -v     print batctl version and batman-adv version (if the module is loaded)

       commands:

       interface|if	[add|del iface(s)]
	      If no parameter is given or the first parameter is neither "add" nor "del" the current interface settings are displayed. In order to
	      add or delete interfaces specify "add" or "del" as first argument and append the interface names you wish to add or delete.

       originators|o	[-w [interval]][-n][-t]
	      Once started batctl will display the list of announced gateways in the network. Use the "-w" option to let batctl refresh the list
	      every second or add a number to let it refresh at a custom interval in seconds (with optional decimal places). If "-n" is given
	      batctl will not replace the MAC addresses with bat-host names in the output. The "-t" option filters all originators that have not
	      been seen for the specified amount of seconds (with optional decimal places) from the output.

       interval|it	[orig_interval]
	      If no parameter is given the current originator interval setting is displayed otherwise the parameter is used to set the originator
	      interval. The interval is in units of milliseconds.

       loglevel|ll	[level[ level[ level]] ...]
	      If no parameter is given the current log level settings are displayed otherwise the parameter(s) is/are used to set the log level.
	      Level 'none' disables all verbose logging. Level 'batman' enables messages related to routing / flooding / broadcasting. Level
	      'routes' enables messages related to routes being added / changed / deleted. Level 'tt' enables messages related to translation ta-
	      ble operations. Level 'all' enables all messages. The messages are sent to the batman-adv debug log. Use batctl log to see them.
	      Make sure to have debugging output enabled when compiling the module otherwise the output as well as the loglevel options won't be
	      available.

       log|l		[-n]
	      batctl will read the batman-adv debug log which has to be compiled into the kernel module. If "-n" is given batctl will not replace
	      the MAC addresses with bat-host names in the output.

       gw_mode|gw	[off|client|server] [sel_class|bandwidth]
	      If no parameter is given the current gateway mode is displayed otherwise the parameter is used to set the gateway mode. The second
	      (optional) argument specifies the selection class (if 'client' was the first argument) or the gateway bandwidth (if 'server' was the
	      first argument). If the node is a server this parameter is used to inform other nodes in the network about this node's internet con-
	      nection bandwidth. Just enter any number (optionally followed by "kbit" or "mbit") and the batman-adv module will guess your appro-
	      priate gateway class. Use "/" to separate the down- and upload rates. You can omit the upload rate and the module will assume an
	      upload of download / 5.
			default: 2000 -> gateway class 20
		       examples: 5000 -> gateway class 49
				 5000kbit
				 5mbit
				 5mbit/1024
				 5mbit/1024kbit
				 5mbit/1mbit
	      If the node is a gateway client the parameter will decide which criterias to consider when the batman-adv module has to choose
	      between different internet connections announced by the aforementioned servers.
			default: 20 -> late switch (TQ 20)
		       examples:  1 -> fast connection
				       consider the gateway's advertised throughput as well as the link quality towards the gateway
				 2  -> stable connection
				       chooses the gateway with the best link quality and stick with it (ignore the advertised throughput)
				 3  -> fast switch connection
				       chooses the gateway with the best link quality but switches to another gateway as soon as a better one is
				       found
				 XX -> late switch connection
				       chooses the gateway with the best link quality but switches to another gateway as soon as a better one is
				       found which is at least XX TQ better than the currently selected gateway (XX has to be a number between 3
				       and 256).

       gateways|gwl	[-w [interval]][-n]
	      Once started batctl will display the list of announced gateways in the network. Use the "-w" option to let batctl refresh the list
	      every second or add a number to let it refresh at a custom interval in seconds (with optional decimal places). If "-n" was given
	      batctl will not replace the mac addresses with bat-host names in the output.

       translocal|tl	[-w [interval]][-n]
	      Display the local translation table. batctl will refresh the list every second if the "-w" option was given or add a number to let
	      it refresh at a custom interval in seconds (with optional decimal places). Use "-n" to let batctl not replace the MAC addresses with
	      bat-host names in the output.

       transglobal|tg	[-w [interval]][-n]
	      Display the global translation table. batctl will refresh the list every second if the "-w" option was given or add a number to let
	      it refresh at a custom interval in seconds (with optional decimal places). Use "-n" to let batctl not replace the MAC addresses with
	      bat-host names in the output.

       softif_neigh|sn	 [-w [interval]][-n]
	      Display the soft-interface neighbor table. batctl will refresh the list every second if the "-w" option was given or add a number to
	      let it refresh at a custom interval in seconds (with optional decimal places). Use "-n" to let batctl not replace the MAC addresses
	      with bat-host names in the output.

       vis_mode|vm	[mode]
	      If no parameter is given the current vis mode is displayed otherwise the parameter is used to set the vis mode.

       vis_data|vd dot	[-n|--numbers][-T|--no-TT][-2|--no-2nd]
	      Display the visualisation data in graphviz dot(1) format. If "--numbers" or "-n" is given batctl will not replace the MAC addresses
	      with bat-host names in the output. With "--no-TT" or "-T" the TT entries are not displayed, so the pure mesh topology can be seen.
	      With "--no-2nd" or "-2" a dot cluster is not formed around primary and secondary addresses from the same device.

       vis_data|vd json [-n|--numbers][-T|--no-TT][-2|--no-2nd]
	      Display the visualisation data in JSON format. If "--numbers" or "-n" is given batctl will not replace the MAC addresses with bat-
	      host names in the output. With "--no-TT" or "-T" the TT entries are not displayed, so the pure mesh topology can be seen. With
	      "--no-2nd" or "-2" a dot cluster is not formed around primary and secondary addresses from the same device.

       aggregation|ag	[1|0]
	      If no parameter is given the current aggregation setting is displayed. Otherwise the parameter is used to enable or disable packet
	      aggregation.

       bonding|b	[1|0]
	      If no parameter is given the current bonding mode setting is displayed. Otherwise the parameter is used to enable or disable the
	      bonding mode.

       fragmentation|f	 [1|0]
	      If no parameter is given the current fragmentation mode setting is displayed. Otherwise the parameter is used to enable or disable
	      fragmentation.

       ap_isolation|ap	 [1|0]
	      If no parameter is given the current ap isolation setting is displayed. Otherwise the parameter is used to enable or disable ap iso-
	      lation.

       ping|p		[-c count][-i interval][-t time][-R] MAC_address|bat-host_name
	      Layer 2 ping of a MAC address or bat-host name.  batctl will try to find the bat-host name if the given parameter was not a MAC
	      address. The "-c" option tells batctl how man pings should be sent before the program exits. Without the "-c" option batctl will
	      continue pinging without end. Use CTRL + C to stop it.  With "-i" and "-t" you can set the default interval between pings and the
	      timeout time for replies, both in seconds. When run with "-R", the route taken by the ping messages will be recorded.

       traceroute|tr	[-n] MAC_address|bat-host_name
	      Layer 2 traceroute to a MAC address or bat-host name. batctl will try to find the bat-host name if the given parameter was not a MAC
	      address. batctl will send 3 packets to each host and display the response time. If "-n" is given batctl will not replace the MAC
	      addresses with bat-host names in the output.

       tcpdump|td	[-p filter][-n] interface ...
	      batctl will display all packets that are seen on the given interface(s). The "-p" options allows the filtering of certain packet
	      types: 1 - batman ogm packets, 2 - batman icmp packets, 4 - unicast packets, 8 - broadcast packets, 16 - vis packets, and 32 - none
	      batman packets. These numbers can be added to filter more than one packet type, e.g. use "-p 3" to display batman ogm packets and
	      batman icmp packets only. If "-n" is given batctl will not replace the MAC addresses with bat-host names in the output.

       bisect		[-l MAC][-t MAC][-r MAC][-s min [- max]][-o MAC][-n] logfile1 [logfile2 ... logfileN]
	      Analyses the logfiles to build a small internal database of all sent sequence numbers and routing table changes. This database can
	      then be analyzed in a number of different ways. With "-l" the database can be used to search for routing loops. Use "-t" to trace
	      OGMs of a host throughout the network. Use "-r" to display routing tables of the nodes. The option "-s" can be used to limit the
	      output to a range of sequence numbers, between min and max, or to one specific sequence number, min. Furthermore using "-o" you can
	      filter the output to a specified originator. If "-n" is given batctl will not replace the MAC addresses with bat-host names in the
	      output.

FILES

       bat-hosts
	      This file is similar to the /etc/hosts file. You can write one MAC address and one host name per line. batctl will search for bat-
	      hosts in /etc, your home directory and the current directory. The found data is used to match MAC address to your provided host name
	      or replace MAC addresses in debug output and logs. Host names are much easier to remember than MAC addresses.

SEE ALSO

       ping(1), traceroute(1), tcpdump(1), dmesg(1), dot(1)

AUTHOR

       batctl was written by Andreas Langer <an.langer@gmx.de> and Marek Lindner <lindner_marek@yahoo.de>.

       This manual page was written by Simon Wunderlich <siwu@hrz.tu-chemnitz.de>, Marek Lindner <lindner_marek@yahoo.de> and Andrew Lunn
       <andrew@lunn.ch>

Linux								   Jan 04, 2010 							 BATCTL(8)