Problems installing a tape storageworks on ML350 G5 with sas hdd and 29320alp card Post: 302163275

10 More Discussions You Might Find Interesting

1. Linux

Installing Linux on External HDD

Hi, I want to install LINUX on my laptop. I have a 2GHZ,1GB RAM and HDD is not partitioned. I donot want to touch this HDD and I have external HDD of 200GB. Can I install LINUX on this external HDD?. I would like system to detect linux only when I connect my external hard drive. else system should...

2. SCO

configure Adaptec 29320ALP Ultra 320 SCSI Card in IBM X3400

I am installing SCO UNIX 5.0.6 in X3400, every thing are install except Adaptec 29320ALP Card (Attached DAT Drive) because their driver are available in btld formate Fllopy DISk and SCO Unix 5.0.6 not support USB Floppy, Can anybody inform us any other method to installed the Adaptec Ultra 120...

3. SCO

Installing SCO OpenServer v5.07 on an HP ML350 G5 server

Hi there We are trying to install SCO OpenServer v5.07 on an HP ML350 G5 server. I have downloaded the drivers from HP's website, but are getting nowhere. (I feel that I am going round in circles - every time I google for the drivers, I end up here.) :( What happens is we create the driver...

4. Solaris

Installing StorageWorks DAT 40 on x86 Solaris 10

I am looking for this document UNIX Configuration Guide on the HP StorageWorks Tape. I need a procedure to install StorageWorks DAT 40 internal tape drive C5668A.

5. Solaris

istall sas raid HBA internal card

I need to install a raid HBA internal card on a T5240. The reason is I have more drives and the current mother board controller does not support more than 4 drives. My question is I have raidctl set up on current drives. If I install new HBA card do I have to delete current raidctl and...

6. Solaris

Install Solaris 10 with an internal StorageTek SAS HBA Raid card

Hi all i would like to ask some suggests about my next job! I have to install a new Sun Netra T5220, with an additional internal StorageTek SAS HBA Raid. The problem come in if every disk is now controlled by the HBA, how can I install the OS? No disk is being detected by the OS. SAS card...

7. Solaris

installing solaris with StorageTek SAS RAID Internal HBA

i was given a task which needs to perform a raid 1 on the boot disk, and 4 other disks on raid 10. Is there any other alternative in installing solaris 10 other than through network installation?will be using solaris update 6. while reading through the user guide i got pretty confuse. ...

8. UNIX for Dummies Questions & Answers

Problems with SCSI card and tape drive

Currenty running SCO Openserver 6 at a Dell PowerEdge T300. I recently installed a driver for an Adaptec SCSI card (adpu320). When I connect a tape drive to it and re-start the system,it freezes and displays the following message: "WARNING: adpu320: Command timed out (ha= 4)" and the system...

9. OS X (Apple)

Installing mac on external hdd?

Hi, As I did not find any specific group for this question, i am putting it here. Can I install Mac OS on an external hard disk? Is this possible or not? I know it is very hard to install mac os on non-mac hardwares. I have a dell inspiron laptop and i want to use mac from external hdd. ...

10. Solaris

Problems cloning Solaris 10 x86 Installation to bigger HDD

Dear All, I have been trying to move my existing Solaris Installation (x86, 10/08) to a bigger HDD. So I created a 22 cylinder boot partition and used the rest of the space for a Solaris2 partition. Then I created slices same size like on my current disk. I copied all files with cpio and...

LEARN ABOUT SUNOS

tcopy

tcopy(1)							   User Commands							  tcopy(1)

NAME

       tcopy - copy a magnetic tape

SYNOPSIS

       tcopy source [destination]

DESCRIPTION

       The  tcopy  utility copies the magnetic tape mounted on the tape drive specified by the source argument. The only assumption made about the
       contents of a tape is that there are two tape marks at the end.

       When only a source drive is specified, tcopy scans the tape, and displays information about the sizes of records and tape files.  If a des-
       tination  is  specified,  tcopy makes a copies the source tape onto the destination tape, with blocking preserved. As it copies, tcopy pro-
       duces the same output as it does when only scanning a tape.

       The tcopy utility requires the use of Berkeley-compatible device names. For example,

       example% tcopy /dev/rmt/1b /dev/rmt/2b

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWesu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       mt(1), ioctl(2), attributes(5)

NOTES

       tcopy will only run on systems supporting an associated set of  ioctl(2) requests.

SunOS 5.10							    10 Mar 2000 							  tcopy(1)

10 More Discussions You Might Find Interesting

1. Linux

Installing Linux on External HDD

Discussion started by: sureshht

2. SCO

configure Adaptec 29320ALP Ultra 320 SCSI Card in IBM X3400

Discussion started by: hafizurr

3. SCO

Installing SCO OpenServer v5.07 on an HP ML350 G5 server

Discussion started by: The_Librarian

4. Solaris

Installing StorageWorks DAT 40 on x86 Solaris 10

Discussion started by: real-chess