Sponsored Content
Full Discussion: AIX Upgrade 5.2 to 5.3
Operating Systems AIX AIX Upgrade 5.2 to 5.3 Post 302161164 by dukessd on Wednesday 23rd of January 2008 08:32:10 PM
Old 01-23-2008
The best way I have found to search the IBM web site is to google with:
site:ibm.com
at the beginning of the search line, so try:
site:ibm.com aix migration 5.2 5.3
for instance.

As with any AIX changes, take TWO mksysb's first, then you can't go too far wrong.

If you have more than 50 SAN disks, disconnect the SAN / fiber before you try the migration.

If you have SAN, check the procedure to migrate AIX in the associated SAN driver doc's, for instance with SDD / SDDpcm you must vary off the SAN volume groups, remove the SAN devices (rmdev) and uninstall the SAN drivers, then migrate AIX, then reinstall the newer drivers and reconfigure the devices. The drivers and host attachment scripts are AIX version specific.

If you try booting the 5.3 disk and don't get the migration option check here:
IBM - No Migration Option

On the 5.3 CD there is a premigration script, run this to check out your system first.

Make sure the system firmware is up to date first:
http://www14.software.ibm.com/webapp/set2/firmware/gjsn

Probably a good time to get the device microcode up to date too, see above link.

You may be able to just boot the 5.3 disk and migrate but a few checks first could save you a whole world of trouble.

At the very least take a mksysb before you do anything.
 

10 More Discussions You Might Find Interesting

1. AIX

HELP for AIX 4.3 upgrade to 5.3

Hi guys I have joined a new department and one of my tasks is to investigate the feasibility of upgrading our current AIX v 4.3 to V5.3. I do not know anything about AIX and any actual work will be done by an outside consultant until such time as I have built up my own knowledge. The system we... (3 Replies)
Discussion started by: JDM
3 Replies

2. UNIX for Dummies Questions & Answers

AIX ML upgrade

Hello everyone, I have to do a ML upgrade on AIX 5.2 from 01 to 09 this is the first time iam going to do it. are there any command i have to keep in mind?? thanks! (1 Reply)
Discussion started by: karthikosu
1 Replies

3. UNIX for Dummies Questions & Answers

AIX Upgrade

Does anyone know any gotcha's on upgrading AIX from 5.1 to 5.3? Any interim steps on needs to do or ??? (3 Replies)
Discussion started by: capeme
3 Replies

4. AIX

AIX OS upgrade gone wrong

I have an AIX LPAR that is one half of a Oracle RAC cluster running over a GPFS filesystem. The OS version in the LPAR was 5300-05-01 I ran an upgrade to 5300-07-05 (Apply only, Commit=NO and preserve old files). The preview passed with no failures detected. The actual upgrade failed... (5 Replies)
Discussion started by: morgan_g
5 Replies

5. AIX

Upgrade from AIX 5.3 to 6.1

Hello Folks, i am facing some weired issues. case is like this :- initially i was on AIX 5.3 i have installed filesets related to my application and those were in APPLY state.(COMMIT is set as NO) Then i have taken lslpp -l| grep -i <apps name> in that i confirmed whether the filesets are... (1 Reply)
Discussion started by: harsh_mulay
1 Replies

6. AIX

AIX ADI for just a TL/SP upgrade help

Is there a way to install a newer TL and SP level to an alternate disk, then boot to that disk? I've used adi to upgrade an os level but not just a tl or sp level. When I tried the same way, I received an error saying I cant migrate from aix 5.3 to aix 5.3. The other options I've found... (1 Reply)
Discussion started by: gravy26
1 Replies

7. AIX

How to upgrade AIX Firmware & TL Maintenance Level in AIX

Steps to upgrade AIX TL ( technology Level ) / Maintenance Level in AIX ( including Firmware HMC VIOS ) This article or post covers upgrades for - Hardware Management Console ( HMC ) - Firmware ( also known as microcode ) - VIO ( Virtual I/O Server = PowerVM ) - AIX Version, Technology... (2 Replies)
Discussion started by: filosophizer
2 Replies

8. AIX

AIX upgrade

i upgrade aix ml 5.3.2.1 to 5.3.2.2 but when running commnd #oslevel -r shows out put, again 5.3.2.1-- where should i chek??? 2-can any one tell me when mknfs command run which files get updated?? (2 Replies)
Discussion started by: nayyer
2 Replies

9. AIX

AIX 7.1 Upgrade problem

Hi all, I'm getting errors while booting AIX 7.1 after upgrade I have used FLRT tool for the process with the following input values shown in the attached photo. titled FLRT After reboot for the upgrade process system hangs and no response as shown in screenshot named AIX7.1-NormalBoot I... (13 Replies)
Discussion started by: h@foorsa.biz
13 Replies

10. AIX

How do I upgrade AIX 7.1.0.3 to 7.1.3.3 without using NIMserver??

Hello Everyone. I am trying to upgrade one of my servers which is AIX 7.1.0.3 to AIX 7.1.3.3. I have downloaded the fix packs and stored in /tmp/TL3SP3 directory. I ran inutoc .; bffcreate -ad; inutoc . then smitty installp I get an error like this Verifying requisites... ... (11 Replies)
Discussion started by: gorkhali
11 Replies
gnutls_x509_crt_get_subject_alt_name(3) 			      gnutls				   gnutls_x509_crt_get_subject_alt_name(3)

NAME
gnutls_x509_crt_get_subject_alt_name - API function SYNOPSIS
#include <gnutls/x509.h> int gnutls_x509_crt_get_subject_alt_name(gnutls_x509_crt_t cert, unsigned int seq, void * san, size_t * san_size, unsigned int * critical); ARGUMENTS
gnutls_x509_crt_t cert should contain a gnutls_x509_crt_t structure unsigned int seq specifies the sequence number of the alt name (0 for the first one, 1 for the second etc.) void * san is the place where the alternative name will be copied to size_t * san_size holds the size of san. unsigned int * critical will be non-zero if the extension is marked as critical (may be null) DESCRIPTION
This function retrieves the Alternative Name (2.5.29.17), contained in the given certificate in the X509v3 Certificate Extensions. When the SAN type is otherName, it will extract the data in the otherName's value field, and GNUTLS_SAN_OTHERNAME is returned. You may use gnutls_x509_crt_get_subject_alt_othername_oid() to get the corresponding OID and the "virtual" SAN types (e.g., GNUTLS_SAN_OTHERNAME_XMPP). If an otherName OID is known, the data will be decoded. Otherwise the returned data will be DER encoded, and you will have to decode it yourself. Currently, only the RFC 3920 id-on-xmppAddr SAN is recognized. RETURNS
the alternative subject name type on success, one of the enumerated gnutls_x509_subject_alt_name_t. It will return GNUTLS_E_SHORT_MEM- ORY_BUFFER if san_size is not large enough to hold the value. In that case san_size will be updated with the required size. If the cer- tificate does not have an Alternative name with the specified sequence number then GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE is returned. REPORTING BUGS
Report bugs to <bug-gnutls@gnu.org>. General guidelines for reporting bugs: http://www.gnu.org/gethelp/ GnuTLS home page: http://www.gnu.org/software/gnutls/ COPYRIGHT
Copyright (C) 2012 Free Software Foundation, Inc.. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. SEE ALSO
The full documentation for gnutls is maintained as a Texinfo manual. If the info and gnutls programs are properly installed at your site, the command info gnutls should give you access to the complete manual. As an alternative you may obtain the manual from: http://www.gnu.org/software/gnutls/manual/ gnutls 3.1.15 gnutls_x509_crt_get_subject_alt_name(3)
All times are GMT -4. The time now is 05:18 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy