Installing 3590 tape drive to pSeries server run on AIX5.3 Post: 302156333

9 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

help installing Sun 8mm unipack scsi tape drive

Hi all, please help I am stuck. I have installed a external unipack scsi tape drive. The tape drive is Exabyte Eliant 820. All I did was connected scsi cable and power it on. When issued "probe-scsi-all" command, the tape is correctly identified. However, when issued "dmesg | more" command, the...

2. Solaris

Error After Installing Tape Drive

Hi, I am a newbie to Solaris, I have a SunFire V120 box, i was trying to install a tape drive(HP SureStore DAT24), i did the install in this manner. # rm -rf /etc/path_to_inst # init 6 later at the "ok" prompt i gave "boot -ar" after doing that it asked me various options i accepted the...

3. Linux

Installing tape drive?

Hello. I have Redhat 8.0 on a laptop. Working good. I wanted to install the tape drive that is physically attached to it. The tape drive worked fine under Windows98SE. It's one of those parallel QIC-80 drives and I confirmed that it is supported by FTape. It appears that FTape might already...

4. UNIX for Dummies Questions & Answers

Installing AIX 4.3, pseries

I'm new with UNIX, i have a pseries server from IBM and i need to install AIX 4.3, i never used wyse terminal or AIX, i need help to know how to install it, i have the server and the wyse i get in into the aixterm, over com1 but i don't know wich command use or what to do to install it..... ...

5. SCO

Installing SCSI Tape drive

Hello, I'm having some issues with installing SCSI tape drive on SCO 5.0.6 hardware config shows the following adapters %adapter 0xE800-0xE8FF 10 - type=alad ha=0 bus=0 id=7 fts=sto %adapter 0x0170-0x0177 15 - type=IDE ctlr=secondary dvr=wd %adapter - 3 - ...

6. AIX

savevg/tar/mksysb of server-A on remote tape drive possible ?

Every 3 months we have to do backups (smitth mksysb/lsmksysb + tar) on at least 30 workstations. We have to carry around 2 external tape drives to connect to them. It is a pain to do because it takes at least 3 days to do (evening/night shift) and users sometimes complain that there desk is not put...

7. UNIX for Dummies Questions & Answers

installing unix tape drive

Hi, i installed a unix tape drive on my alphaserver. when i use a mt command it tells me there is no tape or device. I have used the hardware manager and it shows the tape is present. Can anyone help me understand why it cannot pick up the tape as a default?

8. AIX

Ultrium LTO3 Tape Drive for pSeries p570

I have 2 servers in my office which are p570 and p550. Both run under AIX 5300-07. And I only have 1 x SCSI Ultrium LTO3 Tape Drive. For syncronization purposes, I always backup p570 server's database and restore into p550 server. And due to the frequent process of syncronization, I require to...

9. AIX

Share Blade IBM Tape drive with Windows Server

Hi , We have a Blade Chassis H housing 4 servers. It has a single tape drive. Can i share this tape drive with a HP Server Running Windows Server 2003? They are in the same LAN btw.

LEARN ABOUT CENTOS

tapeinfo

TAPEINFO(1)						      General Commands Manual						       TAPEINFO(1)

NAME

       tapeinfo - report SCSI tape device info

SYNOPSIS

       tapeinfo -f <scsi-generic-device>

DESCRIPTION

       The  tapeinfo  command  reads  various information from SCSI tape drives that is not generally available via most vendors' tape drivers. It
       issues raw commands directly to the tape drive, using either the  operating  system's  SCSI  generic  device  (	e.g.  /dev/sg0	on  Linux,
       /dev/pass0 on FreeBSD) or the raw SCSI I/O ioctl on a tape device on some operating systems.

       One  good  time	to  use 'tapeinfo' is immediately after a tape i/o operation has failed. On tape drives that support HP's 'tapealert' API,
       'tapeinfo' will report a more exact description of what went wrong.

       Do be aware that 'tapeinfo' is not a substitute for your operating system's own 'mt' or similar tape driver control program. It is intended
       to supplement, not replace, programs like 'mt' that access your operating system's tape driver in order to report or set information.

OPTIONS

       The first argument, given following -f , is the SCSI generic device corresponding to your tape drive.  Consult your operating system's doc-
       umentation for more information (for example, under Linux these are generally start at /dev/sg0 under FreeBSD these start at /dev/pass0).

       Under FreeBSD, 'camcontrol devlist' will tell you what SCSI devices you have, along with which 'pass' device controls  them.  Under  Linux,
       "cat /proc/scsi/scsi" will tell you what SCSI devices you have.

BUGS AND LIMITATIONS

       This program has only been tested on Linux with a limited number of tape drives (HP DDS4, Seagate AIT).

AVAILABILITY

       tapeinfo  is  currently	being maintained by Robert Nelson <robertnelson@users.sourceforge.net> as part of the 'mtx' suite of programs. The
       'mtx' home page is http://mtx.sourceforge.net  and  the	actual	code  is  currently  available	there  and  via  SVN  from  http://source-
       forge.net/projects/mtx.

SEE ALSO

       mt(1),mtx(1),scsitape(1),scsieject(1),loaderinfo(1)

								    TAPEINFO1.0 						       TAPEINFO(1)