Console problem Post: 302155840

10 More Discussions You Might Find Interesting

1. Programming

Console IO Problem ...

Does UNIX have a header file that provide the same functions as "conio.h" in Turbo C of DOS? In Turbo C of DOS, "conio.h" provide some special console IO funtions, for example, change the text color, print out a text with a specific co-ordinate, etc ... With these special functions, I can...

2. SCO

login problem at console

I am running sco 5.06 open server We have encountered the problem while login into the live Online server. After putting the usr as root, the system is taking time(20 Sec) to show me �Password:'. Sometimes the system shows login time out. Again sometimes the system is showing password:, after...

3. IP Networking

netscape console auth problem

:( hi all , i have installed netscape console on my local pc to connect to webmail server using LDAP . when i try to login from my console i get an error "Http Exception: Response: Http/1.1 500 Server Error Status 500" i was told that i need to add my IP to the local.conf file. ...

4. UNIX for Advanced & Expert Users

Problem regarding :::: Xen virtual console

hello, I am using fedora core 6. and there is Xen Virtual Console installed in my system ....due to which I am not able to use my serial ports....... What is thi Xen virtual console and what it does????? So, Can I unintall this Xen virtual Console..... or any method so that I can use my...

5. Solaris

Help me with console login problem

Hi, I have solaris 10 installed on my computer and when try to login in console mode, it would give output something like this. login:root Password: Last login: Thu May 29 10:00:55 on console -sh: syntax error: `(' unexpected -sh: grep: not found -sh: uname: not found -sh: test:...

6. Shell Programming and Scripting

output console problem

kill -s KILL 0 ----------------------- ----------------------- i have used this command in a script...it is showing "killed" in output console. i don't want that.plz help what to do.i have tried --kill -s KILL 0 >/dev/null it is still showing "killed" in the output console...what to do?

7. Solaris

T5220 Console Problem

Hi Peeps, Apologies if this is the wrong forum for this, if it is can someone point me in the direction of the right one? Problem: I've dropped an XVR-300 Graphics card into a T5220, configured it to output and input from the screen and keyboard instead of the virtual console. It...

8. Solaris

Ultra 5 serial console problem

Hi I have a stupid problem with ultra 5 console connection. I can't connect to serial port with my laptop. I made these configurations from ok prompt: OK setenv input-device ttya OK setenv output-device ttya OK setenv auto-boot? false I tried to connect to machine with cisco rollover...

9. Solaris

Problem with Console Connection

I'm having a problem establishing a console connection between a V240 and a V440. I verified and re verified the connection was in the correct places. Commands: # tip hardwire connected Nothing happens after that. Other V440's work fine with the receiving the connection. Is there a...

10. Solaris

Problem in intiating x11 console

Hello, I have a Solaris-10 non global zone. I am using MobaXterm. I login on box with root and then "su - caddrd" and then "/usr/local/bin/sudo -u cadwebppc /cad/envs/qa-cm/cadwccDomain/ucm/cs/bin/UserAdmin". This is supposed to open a GUI console, but it is failing and I am not able to figure...

LEARN ABOUT HPUX

vxconfigbackup

vxconfigbackup(1M)														vxconfigbackup(1M)

NAME

       vxconfigbackup - back up disk group configuration

SYNOPSIS

       /etc/vx/bin/vxconfigbackup [-l directory] [[dgname ...] | [dgid ...]]

DESCRIPTION

       The  vxconfigbackup  utility  can  be  used to backup up the configuration information for one or more disk groups.  The disk groups may be
       specified either by name or by ID.  If no disk groups are specified, all disk group configurations are backed up.

OPTIONS

       -l directory
		 Specifies a directory other than the default where the backup configuration files are to be written.

		 Note: The default backup directory is /etc/vx/cbr/bk.

EXAMPLES

       Back up the configuration of the mydg disk group to the directory /dgbackup/mydg:

		 vxconfigbackup -l /dgbackup/mydg mydg

FILES

       /etc/vx/cbr/bk/dgname.dgid/dgid.dginfo
		 Default location of backup file for disk group information.

       /etc/vx/cbr/bk/dgname.dgid/dgid.diskinfo
		 Default location of backup file for disk attributes.

       /etc/vx/cbr/bk/dgname.dgid/dgid.binconfig
		 Default location of backup file for binary configuration copy.

       /etc/vx/cbr/bk/dgname.dgid/dgid.cfgrec
		 Default location of backup file for configuration records in vxprint -m format.

NOTES

       The vxconfigbackupd daemon automatically backs up a disk group's new configuration to the default backup directory whenever the	configura-
       tion is changed.  The vxconfigbackup command is provided to back up the configuration manually at any other desired time.

       The  disk  group  configuration	backup and restore utilities do not save any data in the public region. This includes file system or other
       application data that is configured within VxVM objects.

SEE ALSO

       vxconfigbackupd(1M), vxconfigrestore(1M)

VxVM 5.0.31.1							    24 Mar 2008 						vxconfigbackup(1M)

10 More Discussions You Might Find Interesting

1. Programming

Console IO Problem ...

Discussion started by: MacMonster

2. SCO

login problem at console

Discussion started by: rahmanm

3. IP Networking

netscape console auth problem

Discussion started by: ppass

4. UNIX for Advanced & Expert Users

Problem regarding :::: Xen virtual console

Discussion started by: arunchaudhary19