Sponsored Content
Operating Systems Solaris Remove os mirrored disk Solaris 10 Post 302155255 by malcqv on Thursday 3rd of January 2008 09:49:57 AM
Old 01-03-2008
In the example below d2 is the submirror of d1.

#metastat d1

The above will list the devices used by the mirror d1 so as you can remount the device later.

detach submirror

# metadetach d1 d2
# umount /dev/md/dsk/d1

If the mirror is a root,swap or /usr slice then there is a little more to it and the above is not suitable.

You may also want to clear the metadevices d1 and d2

# metaclear -r d1
# metaclear d2
 

9 More Discussions You Might Find Interesting

1. HP-UX

Number of Disk Mirrored in HP-UX

In HP-UX 11.00 How can i check if there are disks mirrored (2 Replies)
Discussion started by: cgege
2 Replies

2. AIX

Mirrored disk.....

How do I know, which all disks are mirrored? any command? Bala (7 Replies)
Discussion started by: balaji_prk
7 Replies

3. UNIX for Dummies Questions & Answers

Creating create mirrored disk files systems using mkfs command

What is the correct mkfs syntax to create mirrored disk files systems? I need to make the file system 20gb. For example: machine# mkfs -F ufs /dev/md/dsk/d40 size not specified ufs usage: mkfs special size(sectors) \ -m : dump fs cmd line used to make this partition -V : print this... (4 Replies)
Discussion started by: GLJ@USC
4 Replies

4. UNIX for Dummies Questions & Answers

Solaris 10 not booting with mirrored disk

Hi all, I have a V490 running with Solaris 10. The OS disk was mirrored. I wanted to break the mirror, boot with the secondary mirror, and re-mirror the OS with a new disk. This is what I did, detached the metadevices of the secondary mirror disk (disk 1) metaclear-ed the metadevices,... (1 Reply)
Discussion started by: nitinp82
1 Replies

5. UNIX for Advanced & Expert Users

how to create multiple-boot system with disks mirrored(RAID1+0) and disk alone

I have a HP proliant ML 570 G3 with two 146GB disk drives mirrored(RAID1+0) windows server 2003 was installed on that disk. I will add a disk.(scsi 300GB) I will install Linux on that additional disk. I want to create multiple-boot system. Is it possible? I wanna know how to create... (0 Replies)
Discussion started by: lifegeek
0 Replies

6. Solaris

Boot from Mirrored disk

So I have mirrored disk already set up from c1t0d0 to c1t1d0. Is there some special procedures that I need to do before I do and then try to boot from the mirrored disk? I am using a V490 if that helps... (7 Replies)
Discussion started by: drew_1980
7 Replies

7. Solaris

Remove file system from Solaris disk

hi, i have created a file system using newfs command in solaris 10, later i got error messages from the database which i am using. May be database using the disk also. My question is how to remove file system from the disk. Thanks (7 Replies)
Discussion started by: zeeshan047
7 Replies

8. Solaris

Need help replacing a mirrored boot disk

I have a v480 with a mirrored boot disk c1t0 and c1t1. The drives themselves don't show a failure but the mirror's need maintenance. This is my plan for replacing the drive. I would love feedback to point out what I"m missing or where my steps are incorrect. Two things I believe I'm... (3 Replies)
Discussion started by: pcoffey
3 Replies

9. Red Hat

Booting 2nd mirrored boot disk

Hi guys, thanks for helping out. If you have two boot disk mirrored and your primary boot disk fails, how will you boot the system from the second disk? Thank you very much for your assistance on this matter. Arrey (5 Replies)
Discussion started by: cjashu
5 Replies
metaoffline(1M) 					  System Administration Commands					   metaoffline(1M)

NAME
metaoffline, metaonline - place submirrors offline and online SYNOPSIS
/usr/sbin/metaoffline -h /usr/sbin/metaoffline [-s setname] [-f] mirror submirror /usr/sbin/metaonline -h /usr/sbin/metaonline [-s setname] mirror submirror DESCRIPTION
The metaoffline command prevents Solaris Volume Manager from reading and writing to the submirror that has been taken offline. While the submirror is offline, all writes to the mirror will be kept track of (by region) and will be written when the submirror is brought back online. The metaoffline command can also be used to perform online backups: one submirror is taken offline and backed up while the mirror remains accessible. (However, if this is a two-way mirror, data redundancy is lost while one submirror is offline.) The metaoffline command differs from the metadetach command because it does not sever the logical association between the submirror and the mirror. To completely remove a submirror from a mirror, use the metadetach command. A submirror that has been taken offline will only remain offline until the metaonline command is invoked or the system is rebooted. When the metaonline command is used, reading from and writing to the submirror resumes. A resync is automatically invoked to resync the regions written while the submirror was offline. Writes are directed to the submirror during resync. Reads, however, will come from a dif- ferent submirror. Once the resync operation completes, reads and writes are performed on that submirror. The metaonline command is only effective on a submirror of a mirror that has been taken offline. The metaoffline and metaonline commands can not be used on RAID 1 volumes in application-based recovery (ABR) mode. A submirror that has been taken offline with the metaoffline command can only be mounted as read-only. OPTIONS
Root privileges are required for all of the following options except -h. -f Forces offlining of submirrors that have slices requiring maintenance. -h Displays usage message. -s setname Specifies the name of the diskset on which metaoffline and metaonline will work. Using the -s option will cause the com- mand to perform its administrative function within the specified diskset. Without this option, the command will perform its function on local metadevices. mirror Specifies the metadevice name of the mirror from which the submirror will be either taken offline or put online. submirror Specifies the metadevice name of the submirror to be either taken offline or put online. EXAMPLES
Example 1: Taking a Submirror Offline This example takes one submirror, d9, offline from mirror d10. # metaoffline d10 d9 EXIT STATUS
The following exit values are returned: 0 Successful completion. >0 An error occurred. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWmdu | +-----------------------------+-----------------------------+ SEE ALSO
mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaparam(1M), metarecover(1M), metarename(1M), metareplace(1M), metaroot(1M), metaset(1M), metassist(1M), metastat(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4), mddb.cf(4), md.tab(4), attributes(5), md(7D) Solaris Volume Manager Administration Guide NOTES
The metaonline and metaoffline commands are not applicable to mirrors in application-based recovery (ABR) mode. SunOS 5.10 12 Apr 2004 metaoffline(1M)
All times are GMT -4. The time now is 01:22 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy