12-29-2007
First : i'd like to thank every one for his care
second : forgive my language
i will list you all details to help me if you can as i hope :
as i told before that in my company i was responsible for installing NMS ( Network Management Station ) called Naviscore which needed to configure, monitor, and control a Lucent switch network so to build such station you need the following Software:
• Solaris 2.6 and Common Desktop Environment
• Sybase 11.9.2 SQL Server
• Open Client 11.1.1
• HP OpenView 5.01
• NavisCore 05
as you see that the system is too large and it takes too time to work . there is no problems till now but the problem located in what we built in such system simply we have 50 lucent device managed ,configured every thing you can imagine will be controlled via our Server also you can note from Software required >> sybase which mean that there exist huge data will be stored . simply all what others built through more than 8 years .
so there is a spare Machine which i use in my work and built a demo version of our work then backed up the full system ( with the same way the current server work ) and i'm trying to Restore it .
so we can rescue our current system easily and in fast way as possible we can .
i already tried the Restore command which is " ufsrestore xvf /dev/rmt/0n /opt " but i faced more errors as i don't know what he asked me for as example of errors messages :
read error while skipping over inode4 unless you know which volume your file are on you should start with the last volume and network to wards the first}.
If i but any number and press yes this last error is appear but if i press no and rewrites this command again this error is appear {media read error: I/O error}.
Thanks again waiting your replay
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hello,
Here is what I am trying to do.
We have an old Enterprise 250 which we want to phase out. So plan is to move everything running on the 250 to an unused Sun Fire V280R.
Here is what I decided to do:
1. Fresh Solaris 8 install on Sun 280R (disk0). Configure network and install... (1 Reply)
Discussion started by: mshafi
1 Replies
2. Solaris
Hi.... everyone could help me to understand how to do a backup of my servers .. operating systems is sun solaris 8 .
I have some question about ....
1) Is better backup phisical disk or partition ???
i sow the command is ufsdump 0cfu /expbck/bcksunver/c0t0d0s5 dev/dsk/c0t0d0s5 to... (4 Replies)
Discussion started by: tt155
4 Replies
3. AIX
I have several H80 machines, all with AIX 4.3.3. On these machines I have mksysb running for rootvg backups and savevg for non-rootvg backups.
I'm trying to get a list of files on the tapes, but I can't seem to do it with tar for the mksysb images. I keep getting the directory checksum errors?... (3 Replies)
Discussion started by: uXion
3 Replies
4. HP-UX
Hello!
i have a blank harddrive and a complete tape backup of the workstation.
the backup is made with F-Backup.
Now my question is:
how can i restore my workstation?
thanks for every idea!
paul tittel
hup-si (3 Replies)
Discussion started by: paultittel
3 Replies
5. Solaris
Hi men,
I'm testing for my backup&restore job with ZFS.
My server have two disks. I wanna do backup&restore job like ufsdump utility:
Disk0 is rpool(root zpool) and disk1 (backup zpool) will be stored full backup replicates. When rpool zpool have problem, i can "boot cdrom -s" and use my... (5 Replies)
Discussion started by: tien86
5 Replies
6. Emergency UNIX and Linux Support
Hi,
Currently I have 2 servers. 1 is already installed with RHEL4(withmyapplications) and the other one is still brand new.
My question is, is it possible to use DD command to backup the whole harddrive for the RHEL4 server and restore it to the new brand server so that I do not have to... (3 Replies)
Discussion started by: flekzout
3 Replies
7. AIX
Hi experts, i got a question.
i have a production server with two Volume Group(VG) which are rootvg and datavg. Both of these VGs are 256 PP SIZE.
On Disaster Recovery Server (DR server) contains two empty hardisks for restoring rootvg and datavg from production server. This two hardisks are... (7 Replies)
Discussion started by: polar
7 Replies
8. Red Hat
Hi,
I need to back up a RH file system (96G).
The files are oracle .dbf format some of which are 5G in size.
I know that tar has got a size restriction of 2G so I cannot use this.
Can anyone recommend an alternative way of backuping up this FS?
I have been looking at dump but this... (6 Replies)
Discussion started by: Duffs22
6 Replies
9. AIX
I run a backup sucessfully:
find . | backup -ivqf/dev/rmt0
I want to make sure I can restore, so I change to a test directory and try this:
restore -rvqf /dev/rmt0
However, we fail with this error:
New volume on /dev/rmt0:
Cluster size is 51200 bytes (100 blocks).
The volume number is... (3 Replies)
Discussion started by: landog
3 Replies
10. UNIX and Linux Applications
The problematic directory is the following:
/root/.cache/deja-dup
This directory grows until my "/" is full and then the restoring activity fails.
I already tried to create a symbolic link with origin another partition where I have more space. However during the restoring activity ... (4 Replies)
Discussion started by: puertas12
4 Replies
LEARN ABOUT PLAN9
install-solaris
install-solaris(1M) install-solaris(1M)
NAME
install-solaris - install the Solaris operating system
SYNOPSIS
install-solaris
install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation,
install-solaris invokes either a text-based installer or a graphical installer.
The following minimum requirements for physical memory dictate which features are available during installation:
For SPARC machines:
128 MB
Minimum physical memory for all installation types
128 MB
Minimum physical memory required for windowing system
384 MB
Minimum physical memory required for graphical-based installation
For x86 machines:
256 MB
Minimum physical memory for all installation types
256 MB
Minimum physical memory required for windowing system
512 MB
Minimum physical memory required for graphical-based installation
In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea-
tures available.
install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more
details.
install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
installation media. Refer to the for disk space requirements.
Refer to the for more information on the various menus and selections.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkginfo(1), install(1M), pkgadd(1M), attributes(5)
It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.
23 Sep 2005 install-solaris(1M)