UNIX command for ethernet cards? Post: 302154013

8 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Adding new Ethernet cards

Hi there, I just installed a Sparc 4-port Ethernet adapter on my sparc 10 and was wondering how on earth I find out what the names of the ports are. It looks like on startup that on SBus1 there is something called qec qe qe qe qe. So I tried to do an IFCONFIG qe0...but had no success. Can anyone...

2. UNIX for Dummies Questions & Answers

SCO Unix and Two Network Cards

Our shops server runs SCO Openserver 5 release 5. It has two network cards in it (one on 10.0.0.6 and one on 90.0.0.99). When I run scoadmin and look at the network settings it show both my 3com network cards and a loop back driver http://theentertainer.com/james/untitled.jpg Can anyone tell...

3. AIX

PCI Ethernet Cards for IBM RISC 6000 - B50's

I am trying to find PCI Ethernet cards that are compatible with the IBM RISC 6000 - B50 Power PC. None of the regular NIC's seem to have AIX drivers. Does anyone know of AIX drivers for standard PCI Ethernet NIC's or a non IBM NIC that works with the Model B50 at 10/100 MB ?

4. IP Networking

Setup 2 NIC cards in one UNIX system

Hi; I have a UNIX box (SCO 5.0.2) with two (2) NIC cards. One card (NIC1) talks to a network 57.14.65.x/27. The other card NIC2) talks to users on 57.14.103.x and 57.14.105.x with subnet mask of 255.255.0.0. If I set NIC2 to this subnet mask (255.255.0.0) it seems like the NIC traffic is now...

5. Solaris

Command to get the details and number of HBA cards

Hiii... Every one.... I want to know the command to get the details and number of HBA cards attached to a server. I know that we can use "powermt display", but nither my cards are connected to the storage nor powerpath is active. I am using SUN server with Solaris -9. Thanks in...

6. AIX

Idenity no of ethernet cards on the server

How can I identify how many ethernet adapter cards I have on the server from the below ouput ? $>lsdev -Cc adapter | grep ent ent0 Available 06-08 10/100/1000 Base-TX PCI-X Adapter (14106902) ent1 Available 07-08 2-Port 10/100/1000 Base-TX PCI-X Adapter (14108902) ent2 ...

7. UNIX for Dummies Questions & Answers

1 Server with 2 ethernet cards IP on seperate network. Possible?

Hi All, I have just setup a webserver running on a linux box. This server has 2 ethernet cards and only 1 is in used now. eg. 192.168.10.1 is my server IP. All users from 192.168.10.X can access my webserver. However, users from another LAN 10.10.10.X are not able to access my webserver. They...

8. Red Hat

Command for viewing hba cards on rhel7

hi all, I am trying to view the hba cards on a rhel7 server (storage says they are there, but I am not seeing them. I tried lspci -nn | grep -i hba lspci |grep qla I tried looking in /sys/class/fc_host.. but it is empty. I am not sure if I am looking in the right spot...

LEARN ABOUT HPUX

dma32_pool_size

dma32_pool_size(5)						File Formats Manual						dma32_pool_size(5)

NAME

       dma32_pool_size - the amount of memory to reserve for the 32-bit DMA pool

VALUES

   Minimum
   Maximum
   Default
       Specify an integer value.

DESCRIPTION

       This  tunable  specifies  the amount of memory in the first 4GB of the physical address space to be reserved for DMA for 32-bit cards.  The
       memory is set aside at boot time and cannot be used for other purposes.	This is required only on some  Itanium	platforms.   On  platforms
       where the 32-bit pool is not needed, this value is ignored.

       The value of this tunable should be set based on the number of 32-bit cards in the system and the type of cards.

   Related Parameters
       None

WARNINGS

       All  HP-UX kernel tunable parameters are release specific.  This parameter may be removed or have its meaning changed in future releases of
       HP-UX.

       Installation of optional kernel software, from HP or other vendors, may cause changes to tunable  parameter  values.   After  installation,
       some  tunable  parameters may no longer be at the default or recommended values.  For information about the effects of installation on tun-
       able values, consult the documentation for the kernel software being installed.	For information about optional kernel  software  that  was
       factory installed on your system, see at

AUTHOR

       was developed by HP.

SEE ALSO

       None

Itanium(R)-based System Only				     Tunable Kernel Parameters						dma32_pool_size(5)