GIT-WORKTREE(1) 						    Git Manual							   GIT-WORKTREE(1)

NAME
       git-worktree - Manage multiple working trees

SYNOPSIS
       git worktree add [-f] [--detach] [--checkout] [--lock] [-b <new-branch>] <path> [<commit-ish>]
       git worktree list [--porcelain]
       git worktree lock [--reason <string>] <worktree>
       git worktree move <worktree> <new-path>
       git worktree prune [-n] [-v] [--expire <expire>]
       git worktree remove [--force] <worktree>
       git worktree unlock <worktree>

DESCRIPTION
       Manage multiple working trees attached to the same repository.

       A git repository can support multiple working trees, allowing you to check out more than one branch at a time. With git worktree add a new
       working tree is associated with the repository. This new working tree is called a "linked working tree" as opposed to the "main working
       tree" prepared by "git init" or "git clone". A repository has one main working tree (if it's not a bare repository) and zero or more linked
       working trees.

       When you are done with a linked working tree you can simply delete it. The working tree's administrative files in the repository (see
       "DETAILS" below) will eventually be removed automatically (see gc.worktreePruneExpire in git-config(1)), or you can run git worktree prune
       in the main or any linked working tree to clean up any stale administrative files.

       If a linked working tree is stored on a portable device or network share which is not always mounted, you can prevent its administrative
       files from being pruned by issuing the git worktree lock command, optionally specifying --reason to explain why the working tree is locked.

COMMANDS
       add <path> [<commit-ish>]
	   Create <path> and checkout <commit-ish> into it. The new working directory is linked to the current repository, sharing everything
	   except working directory specific files such as HEAD, index, etc.  - may also be specified as <commit-ish>; it is synonymous with
	   @{-1}.

	   If <commit-ish> is a branch name (call it <branch>) and is not found, and neither -b nor -B nor --detach are used, but there does exist
	   a tracking branch in exactly one remote (call it <remote>) with a matching name, treat as equivalent to:

	       $ git worktree add --track -b <branch> <path> <remote>/<branch>

	   If <commit-ish> is omitted and neither -b nor -B nor --detach used, then, as a convenience, a new branch based at HEAD is created
	   automatically, as if -b $(basename <path>) was specified.

       list
	   List details of each worktree. The main worktree is listed first, followed by each of the linked worktrees. The output details include
	   if the worktree is bare, the revision currently checked out, and the branch currently checked out (or detached HEAD if none).

       lock
	   If a working tree is on a portable device or network share which is not always mounted, lock it to prevent its administrative files
	   from being pruned automatically. This also prevents it from being moved or deleted. Optionally, specify a reason for the lock with
	   --reason.

       move
	   Move a working tree to a new location. Note that the main working tree or linked working trees containing submodules cannot be moved.

       prune
	   Prune working tree information in $GIT_DIR/worktrees.

       remove
	   Remove a working tree. Only clean working trees (no untracked files and no modification in tracked files) can be removed. Unclean
	   working trees or ones with submodules can be removed with --force. The main working tree cannot be removed.

       unlock
	   Unlock a working tree, allowing it to be pruned, moved or deleted.

OPTIONS
       -f, --force
	   By default, add refuses to create a new working tree when <commit-ish> is a branch name and is already checked out by another working
	   tree and remove refuses to remove an unclean working tree. This option overrides that safeguard.

       -b <new-branch>, -B <new-branch>
	   With add, create a new branch named <new-branch> starting at <commit-ish>, and check out <new-branch> into the new working tree. If
	   <commit-ish> is omitted, it defaults to HEAD. By default, -b refuses to create a new branch if it already exists.  -B overrides this
	   safeguard, resetting <new-branch> to <commit-ish>.

       --detach
	   With add, detach HEAD in the new working tree. See "DETACHED HEAD" in git-checkout(1).

       --[no-]checkout
	   By default, add checks out <commit-ish>, however, --no-checkout can be used to suppress checkout in order to make customizations, such
	   as configuring sparse-checkout. See "Sparse checkout" in git-read-tree(1).

       --[no-]guess-remote
	   With worktree add <path>, without <commit-ish>, instead of creating a new branch from HEAD, if there exists a tracking branch in
	   exactly one remote matching the basename of <path>, base the new branch on the remote-tracking branch, and mark the remote-tracking
	   branch as "upstream" from the new branch.

	   This can also be set up as the default behaviour by using the worktree.guessRemote config option.

       --[no-]track
	   When creating a new branch, if <commit-ish> is a branch, mark it as "upstream" from the new branch. This is the default if <commit-ish>
	   is a remote-tracking branch. See "--track" in git-branch(1) for details.

       --lock
	   Keep the working tree locked after creation. This is the equivalent of git worktree lock after git worktree add, but without race
	   condition.

       -n, --dry-run
	   With prune, do not remove anything; just report what it would remove.

       --porcelain
	   With list, output in an easy-to-parse format for scripts. This format will remain stable across Git versions and regardless of user
	   configuration. See below for details.

       -v, --verbose
	   With prune, report all removals.

       --expire <time>
	   With prune, only expire unused working trees older than <time>.

       --reason <string>
	   With lock, an explanation why the working tree is locked.

       <worktree>
	   Working trees can be identified by path, either relative or absolute.

	   If the last path components in the working tree's path is unique among working trees, it can be used to identify worktrees. For example
	   if you only have two working trees, at "/abc/def/ghi" and "/abc/def/ggg", then "ghi" or "def/ghi" is enough to point to the former
	   working tree.

DETAILS
       Each linked working tree has a private sub-directory in the repository's $GIT_DIR/worktrees directory. The private sub-directory's name is
       usually the base name of the linked working tree's path, possibly appended with a number to make it unique. For example, when
       $GIT_DIR=/path/main/.git the command git worktree add /path/other/test-next next creates the linked working tree in /path/other/test-next
       and also creates a $GIT_DIR/worktrees/test-next directory (or $GIT_DIR/worktrees/test-next1 if test-next is already taken).

       Within a linked working tree, $GIT_DIR is set to point to this private directory (e.g. /path/main/.git/worktrees/test-next in the example)
       and $GIT_COMMON_DIR is set to point back to the main working tree's $GIT_DIR (e.g. /path/main/.git). These settings are made in a .git file
       located at the top directory of the linked working tree.

       Path resolution via git rev-parse --git-path uses either $GIT_DIR or $GIT_COMMON_DIR depending on the path. For example, in the linked
       working tree git rev-parse --git-path HEAD returns /path/main/.git/worktrees/test-next/HEAD (not /path/other/test-next/.git/HEAD or
       /path/main/.git/HEAD) while git rev-parse --git-path refs/heads/master uses $GIT_COMMON_DIR and returns /path/main/.git/refs/heads/master,
       since refs are shared across all working trees.

       See gitrepository-layout(5) for more information. The rule of thumb is do not make any assumption about whether a path belongs to $GIT_DIR
       or $GIT_COMMON_DIR when you need to directly access something inside $GIT_DIR. Use git rev-parse --git-path to get the final path.

       If you manually move a linked working tree, you need to update the gitdir file in the entry's directory. For example, if a linked working
       tree is moved to /newpath/test-next and its .git file points to /path/main/.git/worktrees/test-next, then update
       /path/main/.git/worktrees/test-next/gitdir to reference /newpath/test-next instead.

       To prevent a $GIT_DIR/worktrees entry from being pruned (which can be useful in some situations, such as when the entry's working tree is
       stored on a portable device), use the git worktree lock command, which adds a file named locked to the entry's directory. The file contains
       the reason in plain text. For example, if a linked working tree's .git file points to /path/main/.git/worktrees/test-next then a file named
       /path/main/.git/worktrees/test-next/locked will prevent the test-next entry from being pruned. See gitrepository-layout(5) for details.

LIST OUTPUT FORMAT
       The worktree list command has two output formats. The default format shows the details on a single line with columns. For example:

	   S git worktree list
	   /path/to/bare-source 	   (bare)
	   /path/to/linked-worktree	   abcd1234 [master]
	   /path/to/other-linked-worktree  1234abc  (detached HEAD)

   Porcelain Format
       The porcelain format has a line per attribute. Attributes are listed with a label and value separated by a single space. Boolean attributes
       (like bare and detached) are listed as a label only, and are only present if and only if the value is true. An empty line indicates the end
       of a worktree. For example:

	   S git worktree list --porcelain
	   worktree /path/to/bare-source
	   bare

	   worktree /path/to/linked-worktree
	   HEAD abcd1234abcd1234abcd1234abcd1234abcd1234
	   branch refs/heads/master

	   worktree /path/to/other-linked-worktree
	   HEAD 1234abc1234abc1234abc1234abc1234abc1234a
	   detached

EXAMPLES
       You are in the middle of a refactoring session and your boss comes in and demands that you fix something immediately. You might typically
       use git-stash(1) to store your changes away temporarily, however, your working tree is in such a state of disarray (with new, moved, and
       removed files, and other bits and pieces strewn around) that you don't want to risk disturbing any of it. Instead, you create a temporary
       linked working tree to make the emergency fix, remove it when done, and then resume your earlier refactoring session.

	   $ git worktree add -b emergency-fix ../temp master
	   $ pushd ../temp
	   # ... hack hack hack ...
	   $ git commit -a -m 'emergency fix for boss'
	   $ popd
	   $ rm -rf ../temp
	   $ git worktree prune

BUGS
       Multiple checkout in general is still experimental, and the support for submodules is incomplete. It is NOT recommended to make multiple
       checkouts of a superproject.

GIT
       Part of the git(1) suite

Git 2.17.1							    10/05/2018							   GIT-WORKTREE(1)