Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Eth err: "3c501 device eth0 does not seem to be present"
Top Forums UNIX for Advanced & Expert Users Eth err: "3c501 device eth0 does not seem to be present" Post 302150617 by praveen_b744 on Wednesday 12th of December 2007 02:29:11 AM
Old 12-12-2007
Error Eth err: "3c501 device eth0 does not seem to be present"
HI,

When I do 'service network restart' , I am getting the following error.

"3c501 device eth0 does not seem to be present, delaying initialization"

Can any one suggest me the cause/solution for this?
When I do 'lspci' it is showing the ehternet card as
" Ethernet controller"Marvell Technology Group Ltd.88E8038 PCI-E Fast Ethernet Controller (rev 14) "

And If I do 'ifconfig' , its not showing the ipconfiguration of eth0,its showing only loopback address.

And I am able to do networking in rescue mode.How com it is working[recognizing N/W care] in rescue mode, and not in run level 5?


Thanks in advance.
Last edited by praveen_b744; 12-12-2007 at 04:34 AM..
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Explain the line "mn_code=`env|grep "..mn"|awk -F"=" '{print $2}'`"

Hi Friends, Can any of you explain me about the below line of code? mn_code=`env|grep "..mn"|awk -F"=" '{print $2}'` Im not able to understand, what exactly it is doing :confused: Any help would be useful for me. Lokesha (4 Replies)
Discussion started by: Lokesha
4 Replies

2. Shell Programming and Scripting

Adding custom mesg. when redirecting "exec 2>stderr.err" ?

Doubt regarding using "exec" command to redirect the STDERR to a file. e.g I did it this way. mystage.sh #!/bin/sh exec 2>stage.err .... .... cat stage.err mv: cannot move `/root/stage' to a subdirectory of itself, `/root/stage_old/stage' ls: *.zDB: No such file or... (0 Replies)
Discussion started by: snurani
0 Replies

3. Windows & DOS: Issues & Discussions

Samba (SMB) client fails: "Called name not present"

Hi, I issue smbclient on a Linux REd hat server : smbclient -L ***.16.0.42 -U domaine/Administrator Password: Domain= OS= Server= Domain= OS= Server= Sharename Type Comment --------- ---- ------- IPC$ IPC IPC distant ... (0 Replies)
Discussion started by: big123456
0 Replies

4. Shell Programming and Scripting

Removal of comma(,) present inbetween double quotes(" ")

Hi Experts, I have a file with some of the records contain double quotes. If I found a double quote(") in any particular record , I need to look for the next double quote in that particular record and in between these quotes, if any comma(,) is there I need to replace with Tilde (~) in the same... (12 Replies)
Discussion started by: vsairam
12 Replies

5. Emergency UNIX and Linux Support

Mapping between "Pseudo name" and "Logical device ID" in powerpath with SVM changed....

Dear All, I was having powerpath 5.2 on SUN server with SVM connected to CLARIION box.Please find the following output : root # powermt display dev=all Pseudo name=emcpower3a CLARiiON ID=CK200073400372 Logical device ID=60060160685D1E004DD97FB647BFDC11 state=alive; policy=CLAROpt;... (1 Reply)
Discussion started by: Reboot
1 Replies

6. Shell Programming and Scripting

awk command to replace ";" with "|" and ""|" at diferent places in line of file

Hi, I have line in input file as below: 3G_CENTRAL;INDONESIA_(M)_TELKOMSEL;SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL My expected output for line in the file must be : "1-Radon1-cMOC_deg"|"LDIndex"|"3G_CENTRAL|INDONESIA_(M)_TELKOMSEL"|LAST|"SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL" Can someone... (7 Replies)
Discussion started by: shis100
7 Replies

7. Red Hat

Find out which eth or device belongs to interface "port 1 PCI 4"

Hi, I´ve given only this info to configure a network interface : "port 1 PCI 4" I´ve been searching for any kind of relationship in the system which allow me to find the etc that must be configured... Please, could anybody help me? rhxx:#/root# lspci |grep -i "PCI BRIDGE" 00:01.0 PCI... (0 Replies)
Discussion started by: pabloli150
0 Replies

8. IP Networking

Stuck at "bringing up interface eth0:"

Server is stuck at "Stuck at "bringing up interface eth0:"" after i hard reset the server I have IPMI access, please help me diagnose the cause if you can :( (0 Replies)
Discussion started by: postcd
0 Replies

9. UNIX for Dummies Questions & Answers

Using "mailx" command to read "to" and "cc" email addreses from input file

How to use "mailx" command to do e-mail reading the input file containing email address, where column 1 has name and column 2 containing “To” e-mail address and column 3 contains “cc” e-mail address to include with same email. Sample input file, email.txt Below is an sample code where... (2 Replies)
Discussion started by: asjaiswal
2 Replies

10. Shell Programming and Scripting

Bash script - Print an ascii file using specific font "Latin Modern Mono 12" "regular" "9"

Hello. System : opensuse leap 42.3 I have a bash script that build a text file. I would like the last command doing : print_cmd -o page-left=43 -o page-right=22 -o page-top=28 -o page-bottom=43 -o font=LatinModernMono12:regular:9 some_file.txt where : print_cmd ::= some printing... (1 Reply)
Discussion started by: jcdole
1 Replies

LEARN ABOUT DEBIAN

vlan-interfaces

VLAN-INTERFACES(5)						   File formats 						VLAN-INTERFACES(5)

NAME

       /etc/network/interfaces (vlan) - vlan extensions for the interfaces(5) file format

DESCRIPTION

       /etc/network/interfaces	contains  network  interface  configuration  information  for  the  ifup(8)  and ifdown(8) commands.  This manpage
       describes the vlan extensions to the standard interfaces(5) file format.

       Primary extensions exist to make and destroy vlan interfaces, secondary extensions exist for ipv4 interface manipulation which  are  gener-
       ally needed when using (a lot of) vlans.

VLAN CREATION

       Vlan  interface	definitions  exist  of the vlan interface name, and an optional 'raw-device' parameter.  Vlan interfaces are numbered 1 to
       4095.  You have the option to have interface names zero-padded to 4 numbers, or just the plain digits without leading zero.  The  following
       example shows four ways to create a vlan with id 1 on interface eth0.  They all result in different names.

	iface eth0.1 inet static
	    address 192.168.1.1
	    netmask 255.255.255.0

	iface vlan1 inet static
	    vlan-raw-device eth0
	    address 192.168.1.1
	    netmask 255.255.255.0

	iface eth0.0001 inet static
	    address 192.168.1.1
	    netmask 255.255.255.0

	iface vlan0001 inet static
	    vlan-raw-device eth0
	    address 192.168.1.1
	    netmask 255.255.255.0

	# We don't have br support out of the box
	iface br0.2 inet static
	    vlan-raw-device br0
	    address 192.168.1.1
	    netmask 255.255.255.0

	# Aliases are ignored
	iface br0.2:1 inet static
	    address 192.168.1.1
	    netmask 255.255.255.255

EXTRA IFACE OPTIONS

       Usually someone who uses vlans also wants to do some other manipulations with the ip stack or interface.

       vlan-raw-device devicename
	      Indicates the device to create the vlan on.  This is ignored when the devicename is part of the vlan interface name.

       ip-proxy-arp 0|1
	      Turn proxy-arp off or on for this specific interface.  This also works on plain ethernet like devices.

       ip-rp-filter 0|1|2
	      Set the return path filter for this specific interface.  This also works on plain ethernet like devices.

       hw-mac-address mac-address
	      This sets the mac address of the interface before bringing it up.  This works on any device that allows setting the hardware address
	      with the ip command.

AUTHOR

       This manpage was adapted from interfaces(5) by Ard van Breemen <ard@kwaak.net>

SEE ALSO

       vconfig(8) interfaces(5)

vlan								 September 30 2007						VLAN-INTERFACES(5)
All times are GMT -4. The time now is 01:33 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy