12-03-2007
The three things you should have connected to your Sun 5 are....
power
network cable into LAN port
serial cable on connector "A"
nothing else.
Connect the other end of the serial cable to the serial port on a PC or laptop running windows. Then use Start->Programs->Accessories->Communications->Hyperterm and create a new profile and use 9600,n,8,1 as the settings.
Then when you power on the Ultra5 it should start sending information down the serial cable and you should see this on your terminal, if you don't you most probably need a null-modem to swap the TX/RX wires over.
From here you can do "Ctrl-Break" and it should reply with "ok"
then do "boot cdrom" with the 1st disk in the drive. Then go through the menus....
You can copy and paste the contents of the terminal screen here to assist us in helping you.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hello everybody!!
I need your help again.
I am using Sun Ultra sparc 60 machine.Follwing are the types of files getting generated in /var/tmp.
"windu_sm_o aaaa,baaa,caaa,daaa" etc.
I am not able to locate which application is generating these files.
Can I straightway delete these files ? or... (1 Reply)
Discussion started by: vikasdeshmukh
1 Replies
2. UNIX Desktop Questions & Answers
I wouldn't call myself exactly new to Unix. I've played with Linux before so I can get around alright. I just have never really learned the basics, like setting a user's path. How do I do that on my Sun station? Obvioulsly, I've got several different bins, but I can only use the commands in... (1 Reply)
Discussion started by: skinnell2
1 Replies
3. UNIX Benchmarks
Sparc Ultra2:
Notes
prtdiag:
System Configuration: Sun Microsystems sun4u Sun Ultra 2 UPA/SBus (2 X UltraSPARC-II 296MHz)
System clock frequency: 99 MHz
Memory size: 768 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU... (0 Replies)
Discussion started by: tnorth
0 Replies
4. Solaris
am wonder wich sun computer is better, a sun ultra or sun sparkstation, and what is the difference (7 Replies)
Discussion started by: nobody
7 Replies
5. Solaris
Hi Guys,
I have a 2nd hand Sun ultra-5, I wanted to know how to be able to run it as a normal window. I do not have any experience whatsoever with solaris/unix. Does anyone can give me a clue where to start. When I switch it goes to:
unix console login:
pa$$word:
#UNIX sendmail : enable to... (0 Replies)
Discussion started by: lingosa
0 Replies
6. Solaris
Hi All,
I bought a sun workstation from ebay. Can I replace the cd-rom drive with a dvd-rom drive with any type? I mean, can I just buy a dvd-rom drive from a pc store?
Thanks,
itik (2 Replies)
Discussion started by: itik
2 Replies
7. Solaris
hi all,
it seem hard to see on a regular monitor the ultra 10 converter to rgb so that it can go to a pc monitor.
do u know how can i fix the monitor properly? it's not easy to see on the monitor there's so many lines.
thanks in advance. (2 Replies)
Discussion started by: itik
2 Replies
8. Solaris
Hi experts
is it possible to install lom on sun ultra 10 box?
can you guys help me in undertanding lom as i tried goggling , couldn't get good stuff.
Please :) (6 Replies)
Discussion started by: kumarmani
6 Replies
9. Hardware
Hi all,
I managed to salvage form work an old Sun Sparc Ultra 30. I have had it stored (controlled storage) for a few years and decided to get it home and boot it up.
It starts up with a beep then I can hear disks spinning up, CDROM moving but nothing is displayed on the monitor.
Can... (2 Replies)
Discussion started by: robbo007
2 Replies
10. Solaris
Hi
I have just acquired an Ultra 5. It has 256MB of memory and a 360Mhz Ultra IIi SPARC processor. So far, I have had some typical fun and games to get it working:
- It had a dead NVRAM chip. I hacked it open and installed a CR2032. It looks suitably bodged up, but is working. I set the MAC... (8 Replies)
Discussion started by: _JonB_
8 Replies
LEARN ABOUT OPENDARWIN
optiups
OPTIUPS(8) NUT Manual OPTIUPS(8)
NAME
optiups - Driver for Opti-UPS (Viewsonic) UPS and Zinto D (ONLINE-USV) equipment
NOTE
This man page only documents the hardware-specific features of the optiups driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
optiups was originally written against a PowerES 280es in nut-0.45. It was revised for nut-2.0.1 and tested against a PowerES 420E. It is
expected to work with at least the PowerES, PowerPS, and PowerVS models.
This driver additionally supports a Zinto D from ONLINE USV-Systeme AG because of their very similar commands, but it is unknown if it also
works with other UPS from them.
This driver will not work with the PowerES stock serial cable. You will need to construct your own three conductor cable:
UPS 6 -> PC 3
UPS 9 -> PC 2
UPS 4 -> PC 5
The cable for Online-USV uses pin UPS 7 (not UPS 4) -> PC 5.
EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5) file:
status_only
Only poll for critical status information. Without this, optiups (and all NUT drivers) poll all sorts of information from the UPS
fairly often. It is probably not often enough to hurt anything, so this option probably is not very useful, unless you have a flaky
serial connection or a highly loaded machine.
nowarn_noimp
Does not print warnings when the UPS reports that a variable is not implemented or not pollable. Without the option you will get a
message sent to your system logs each time NUT polls the UPS. If you specify nowarn_noimp, this message will only be logged once.
fake_lowbatt
This forces the low battery flag true. Without it, if you want to test your UPS, you will have to unplug it and wait until the battery
drops to a low/critical voltage level before NUT will respond and power down your system. With the flag, NUT should power down the
system soon after you pull the plug. When you are done testing, you should remove this flag.
For basic shutdown configuration testing, the command upsmon -c fsd is preferred.
powerup
Zinto D from ONLINE-USV cannot be identified when switched to standby. Set this flag to allow the driver to power-up your Zinto UPS.
This will also power-up your equipment connected to the UPS!
BUGS
On the 420E, ups.serial and ups.temperature are unsupported features. This is not a bug in NUT or the NUT driver, just the way things are
with this UPS.
AUTHOR
Russell Kroll, Scott Heavner, Matthias Goebl
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 OPTIUPS(8)