11-27-2007
If my memory serves my well,
type scoadmin, then i believe there is an option Hardware manager or something, and then scroll until SCSI tape/drive. Im' not sure what comes then, but you can try
9 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hi. I have been having problems with restoring from a tape backup. I use the following cpio command:
find / -print | cpio -ouvB > /dev/rStp0
After running this cpio command, the screen will display all files, but when I try to read or restore the tape I get the following error:
Tape input... (1 Reply)
Discussion started by: cstovall
1 Replies
2. Filesystems, Disks and Memory
I have been restoring from tape some old data. I have done quite a few tapes and have had no problems until now.
The command I am running is "dd if=/dev/rmt/1hbn bs=1024 | tar -pBxF - ".
This is the second tape have have come up with the error "Not enough space". This tape has a couple of... (1 Reply)
Discussion started by: mtoombs
1 Replies
3. HP-UX
I am trying to do a restore on a backup tape (DDS2) and am having a little trouble. For one, I dont know how the tape was made, whether is was tar, cpio, dump..etc. Anyone know how to restore a tape without knowing the format of the backup? (5 Replies)
Discussion started by: bake255
5 Replies
4. AIX
Hello everyone
I have a tape with some information that I got
to restore, the tape was made with the fbackup
command in a hp box.
My question is that I have to restore in a Ibm
box, how can I do this ?
Thanks in advance (1 Reply)
Discussion started by: lo-lp-kl
1 Replies
5. UNIX for Dummies Questions & Answers
Hi All,
I have an old Unix system used by a client as a backup server.I installed an Exabyte tape drive and on restarting the server and during POSTs, the system recognizes the tape drive with its scsi id. On running the command devstat -IAF, the system sees the tape drive quite well.
When... (1 Reply)
Discussion started by: ezleone
1 Replies
6. Solaris
I have a T2000 server that is JumpStarted with Solaris 10 from the JumpStart server. Host name and IP address is changed after that. Then we backup the server using FLAR to tape:
root.damas# date; flarcreate -c -t -n "Sol10_cairo_image" -a "engineering@starsolutions.com" -R / /dev/rmt/0n ;... (2 Replies)
Discussion started by: StarSol
2 Replies
7. Solaris
Hope someone can help me here...
I've got to restore an E450 with 300MHz cpus which was running Solaris 2.6 from tape. Regrettably the boot drive has failed.
I've access to the first release of Solaris 2.6 CD's and to a set of Solaris 9 CD's.
I remember that different E450 CPUs needed different... (1 Reply)
Discussion started by: pamplemousse
1 Replies
8. Emergency UNIX and Linux Support
Hi
I recently deleted my /etc but I had a backup on tape. I was able to boot the server with a cd-rom and mounted the /c1t0d0s0 which is where the root directory resides. However when I tried to restore the backup with tar xvf /dev/rmt/0n I wasn't successful even though I was able to use the tar... (2 Replies)
Discussion started by: rahmantanko
2 Replies
9. AIX
Hi,
I have taken a backup of a directory on my tape in using below command
cd /backup
find * -print|backup -ivf '/dev/rmt0' '-U' |tee -a /syslogs/backup.log and output appear in below format.
a 0 rman-before-08032014
a 58403323904... (2 Replies)
Discussion started by: m_raheelahmed
2 Replies
MT(1) General Commands Manual MT(1)
NAME
mt - magnetic tape control
SYNOPSIS
mt [-f device] [count]
DESCRIPTION
Mt is a user interface to the magnetic tape commands described in mtio(4). It allows one to space a tape forwards or backwards, write end
of file markers, etc.
With the -f option a tape device can be named, otherwise the environment variable TAPE is used if set, otherwise the default device
/dev/nrst4 is assumed. Standard input is used if the tape name is a dash (-). The count argument is used to tell how many blocks or files
to space or how many file markers to write. It may be a C-style decimal, octal or hexadecimal constant, by default "1".
Command is the action to perform, it may be one of the following, or any unambiguous prefix (like st for status):
eof, weof Write count end-of-file markers.
fsf Forward space count file markers.
fsr Forward space count records. (The size of a record depends on the tape, and may even be variable, depending on the size of
the writes.)
bsf Backwards space count files. The count may be zero to backspace to the start of the current file. (A tape device need not
support backwards movement, or may be very slow doing it. Rewinding and forward spacing may be better.)
bsr Backwards space count records. The tape is positioned after the last block of the previous file if you hit a filemark when
spacing backwards. The block count is set to -1 to indicate that the driver has no idea where it is on the previous file.
eom Forward space to the end of media.
rewind Rewind the tape.
offline, rewoffl
Rewind and take offline. This may cause some drives to eject the tape.
status Shows the status of the drive, the sense key of the last SCSI error, current file number, current record number, residual
count if the last command that encountered end-of-file, and the current block size.
retension Removes tape tension by winding and rewinding the tape completely.
erase Erases the tape completely and rewinds it.
density Sets the density code to read or write the tape to count. Density codes supported depend on the drive. This command need
not be used if the drive senses the proper density on read and can only write one density.
blksize, blocksize
Sets the block size used to read or write the tape to count. This command may be used to select a fixed block size for a
variable block size tape. This will speed up I/O for small block sizes. Use a zero count to use variable sized blocks
again.
ENVIRONMENT
TAPE Tape drive to use if set.
FILES
/dev/nrst4 Default tape device.
SEE ALSO
mtio(4), st(4).
AUTHOR
Kees J. Bot (kjb@cs.vu.nl)
MT(1)