Sun Solaris Ultra 10 Not booting! Post: 302146360

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Tape Drive Connected to a Sun Ultra 10/Solaris 2.7

I have a Sun Ultra 10/Solaris 2.7 with a differential SCSI card connected to a Supter DLt1 Tape Drive. When I boot the machine, and I do a probe-scsi-all in the very beginning of the boot process. It shows up correctly. If I wait for the boot process to proceed and then I do a probe-scsi-all, I get...

2. UNIX Desktop Questions & Answers

Using a Sun Ultra 5 at work

I wouldn't call myself exactly new to Unix. I've played with Linux before so I can get around alright. I just have never really learned the basics, like setting a user's path. How do I do that on my Sun station? Obvioulsly, I've got several different bins, but I can only use the commands in...

3. UNIX Benchmarks

Sun Ultra 2 Solaris 8

Sparc Ultra2: Notes prtdiag: System Configuration: Sun Microsystems sun4u Sun Ultra 2 UPA/SBus (2 X UltraSPARC-II 296MHz) System clock frequency: 99 MHz Memory size: 768 Megabytes ========================= CPUs ========================= Run Ecache CPU CPU...

4. UNIX Benchmarks

Sun Ultra 30 Solaris 8

Sun Ultra30 Solaris 8 Notes: ... Results: System -- SunOS box 5.8 Generic_108528-23 sun4u sparc SUNW,Ultra-30 Start Benchmark Run: Fri Sep 12 11:59:12 EDT 2003 1 interactive users. Dhrystone 2 without register variables 502087.7 lps (10 secs, 6 samples) Dhrystone 2 using...

5. Solaris

sun ultra or sun sparkstation

am wonder wich sun computer is better, a sun ultra or sun sparkstation, and what is the difference

6. Solaris

sun ultra

Hi Guys, I have a 2nd hand Sun ultra-5, I wanted to know how to be able to run it as a normal window. I do not have any experience whatsoever with solaris/unix. Does anyone can give me a clue where to start. When I switch it goes to: unix console login: pa$$word: #UNIX sendmail : enable to...

7. Solaris

Problem booting Sun ultra enterprise 450 server

Hi, I have a sun ultra enterprise 450 server. This server powers on and a white screen appears with the system and network information. But it doesnot boot up completely. Booting operation wil be halted by a warning: \usr\sbin\fsck not found. Most likely the mount of \usr failed or the...

8. Solaris

Sun Ultra Enterprise 4500 not booting

Hi, I hope anyone could help me on this. Here we have an Ultra Enterprise 4500 server. Since a few days ago, when starting the system, it showed a message about a faulty CPU fan. So, we manage to clean it up by removing it and then installing it back (as in the user manual). After that, when...

9. Solaris

SUN ULTRA 45 - Solaris

hi, my sun box hangs- KEYBOARD not found. Using hyper link it boots and then hangs without able to access or get ok promt ----SCREEN SHOT AS-------------------------------------------------- �Loading onboard drivers: ebus i2c i2c i2c ppm /ebus@1f,464000: flashprom rtc serial serial env-monitor...

10. Solaris

Cannot install Sun Solaris 10 on Ultra 10

http://www.unix.com/images/smilies/mad.gif Hi, this is parameswar. I have two sun ultra 5/10 workstations processor is sparc IIi 440 and ram is 512 but without hard disk and cdrom so can i use seagate 40Gb and sony dvd writer which is presented in windows pc. Both are IDE cables. while I...

LEARN ABOUT X11R4

dbus-monitor

dbus-monitor(1) 					      General Commands Manual						   dbus-monitor(1)

NAME

       dbus-monitor - debug probe to print message bus messages

SYNOPSIS

       dbus-monitor [--system | --session] [--profile | --monitor] [watch expressions]

DESCRIPTION

       The  dbus-monitor command is used to monitor messages going through a D-Bus message bus.  See http://www.freedesktop.org/software/dbus/ for
       more information about the big picture.

       There are two well-known message buses: the systemwide message bus (installed on many systems as the "messagebus"  service)  and  the  per-
       user-login-session  message  bus (started each time a user logs in).  The --system and --session options direct dbus-monitor to monitor the
       system or session buses respectively.  If neither is specified, dbus-monitor monitors the session bus.

       dbus-monitor has two different output modes, the 'classic'-style monitoring mode and profiling mode. The profiling format is a compact for-
       mat  with a single line per message and microsecond-resolution timing information. The --profile and --monitor options select the profiling
       and monitoring output format respectively. If neither is specified, dbus-monitor uses the monitoring output format.

       In order to get dbus-monitor to see the messages you are interested in, you should specify a set of watch expressions as you  would  expect
       to be passed to the dbus_bus_add_watch function.

       The message bus configuration may keep dbus-monitor from seeing all messages, especially if you run the monitor as a non-root user.

OPTIONS

       --system
	      Monitor the system message bus.

       --session
	      Monitor the session message bus.	(This is the default.)

       --profile
	      Use the profiling output format.

       --monitor
	      Use the monitoring output format.  (This is the default.)

EXAMPLE

       Here is an example of using dbus-monitor to watch for the gnome typing monitor to say things

	 dbus-monitor "type='signal',sender='org.gnome.TypingMonitor',interface='org.gnome.TypingMonitor'"

AUTHOR

       dbus-monitor was written by Philip Blundell.  The profiling output mode was added by Olli Salli.

BUGS

       Please send bug reports to the D-Bus mailing list or bug tracker, see http://www.freedesktop.org/software/dbus/

																   dbus-monitor(1)