Sponsored Content
Full Discussion: dladm use
Operating Systems Solaris dladm use Post 302145118 by blowtorch on Monday 12th of November 2007 11:44:58 PM
Old 11-13-2007
Quote:
Originally Posted by hshapiro
In order to team 2 NIC ports together on my qud ethernet card do I just do this:
dladm create aggr -d ce0 -d ce1 key

Do I need to do anything else like a new hostname or hosts file? Once I do that, I should be able to unplug either ce0 or ce1 and the network conenction will continue? Will this survive a reboot?
I hope that your 'key' is an integer. Regarding your other questions:

You do not need a new hostname. You do need changes in the /etc/hosts and /etc/hostname.whatever file.

You should be able to unplug ce0/1 and have the network work - I have never used it btw.

This will survive a reboot (the man page says so).

You might also want to go through this link for some more info.
 

4 More Discussions You Might Find Interesting

1. Solaris

remove interface from dladm

Greetings how can i remove an interface from dladm? i want to remove ce3 and ce4 which are not even plumbed but still shown in dladm output :( dladm show-dev ce0 link: unknown speed: 1000 Mbps duplex: full ce1 link: unknown speed: 1000 Mbps duplex:... (3 Replies)
Discussion started by: kashif_islam
3 Replies

2. Solaris

ifconfig -a vs dladm show-dev and IP ?

Can anyone please explain what does these means ? # dladm show-dev nxge0 link: up speed: 1000 Mbps duplex: full nxge1 link: up speed: 1000 Mbps duplex: full e1000g0 link: up speed: 1000 Mbps duplex: full e1000g1 ... (6 Replies)
Discussion started by: dehetoxic
6 Replies

3. Solaris

[beginner] dladm create-bridge

hello everyone, I'm a new user and unix-beginner. I've just installer solaris 11 on my home server, disabled some services, created a fallback BE, enabled speedstep, etc and now I'm trying to create some zones. I'd like to have an exclusive ip zone and, as far as I know, I sould assignate it... (12 Replies)
Discussion started by: kimj
12 Replies

4. Solaris

Solaris 11.4.2.3.0 - dladm link names mapping

Hi all, I have never wondered where is the mapping of the link names to physical device path display under dladm show-phys until today. fmadm list reported nic port failure and i am trying to mapped it to the correct linkname in dladm show-link / dladm show-phys to see if the link is... (1 Reply)
Discussion started by: javanoob
1 Replies
HOSTS(5)						     Linux Programmer's Manual							  HOSTS(5)

NAME
hosts - static table lookup for hostnames SYNOPSIS
/etc/hosts DESCRIPTION
This manual page describes the format of the /etc/hosts file. This file is a simple text file that associates IP addresses with hostnames, one line per IP address. For each host a single line should be present with the following information: IP_address canonical_hostname [aliases...] Fields of the entry are separated by any number of blanks and/or tab characters. Text from a "#" character until the end of the line is a comment, and is ignored. Host names may contain only alphanumeric characters, minus signs ("-"), and periods ("."). They must begin with an alphabetic character and end with an alphanumeric character. Optional aliases provide for name changes, alternate spellings, shorter hostnames, or generic hostnames (for example, localhost). The Berkeley Internet Name Domain (BIND) Server implements the Internet name server for UNIX systems. It augments or replaces the /etc/hosts file or hostname lookup, and frees a host from relying on /etc/hosts being up to date and complete. In modern systems, even though the host table has been superseded by DNS, it is still widely used for: bootstrapping Most systems have a small host table containing the name and address information for important hosts on the local network. This is useful when DNS is not running, for example during system bootup. NIS Sites that use NIS use the host table as input to the NIS host database. Even though NIS can be used with DNS, most NIS sites still use the host table with an entry for all local hosts as a backup. isolated nodes Very small sites that are isolated from the network use the host table instead of DNS. If the local information rarely changes, and the network is not connected to the Internet, DNS offers little advantage. FILES
/etc/hosts NOTES
Modifications to this file normally take effect immediately, except in cases where the file is cached by applications. Historical Notes RFC 952 gave the original format for the host table, though it has since changed. Before the advent of DNS, the host table was the only way of resolving hostnames on the fledgling Internet. Indeed, this file could be created from the official host data base maintained at the Network Information Control Center (NIC), though local changes were often required to bring it up to date regarding unofficial aliases and/or unknown hosts. The NIC no longer maintains the hosts.txt files, though looking around at the time of writing (circa 2000), there are historical hosts.txt files on the WWW. I just found three, from 92, 94, and 95. EXAMPLE
127.0.0.1 localhost 192.168.1.10 foo.mydomain.org foo 192.168.1.13 bar.mydomain.org bar 146.82.138.7 master.debian.org master 209.237.226.90 www.opensource.org SEE ALSO
hostname(1), resolver(3), resolver(5), hostname(7), named(8) Internet RFC 952 COLOPHON
This page is part of release 3.44 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/. Linux 2002-06-16 HOSTS(5)
All times are GMT -4. The time now is 09:52 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy