11-05-2007
No HMC = No VIO.
You could have IVM though.
If you have a p5 with just one install of AIX (no vio and no ivm) then the serial ports (which are owned by the service processor) are passed on to the AIX OS, it knows to do this if the display shows HMC=0, I think as vty rather than tty as on power4, ports.
You cannot use smitty tty to configure them because they are not tty ports, but you can configure them (speed, parity, etc.) from ASMI and they can be used for a console in AIX.
If you get no console output during or after boot, boot to SMS and select the console, then do a service/maintenance mode boot, and again, configure the console to any available vty type device, then do a normal boot and you should be OK.
If you have not installed AIX yet then boot to SMS, select the console and then install AIX and you should be ok.
As said before the default console settings are 19200,8,n,1 but you can set this from ASMI for both the ASMI and the AIX connection.
9 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
I have a SuSE8.1 Linux box running as a testing webserver to my small network. It's administered through ssh and webmin entirely, and doesn't have a monitor.
I could really do with the graphics card for another machine, but if I take it out, I can't start the machine up.
Any ideas how I can... (6 Replies)
Discussion started by: mistafeesh
6 Replies
2. AIX
Hello there!
Can anybody help me with regards to the driver of GXT250P graphics adapter. I have searched the web for the fileset devices.pci.14103c00 however no success was found. My current AIX version is 4.1.5 and my machine is 7043-140. My installation AIX CD is not working anymore, so I... (0 Replies)
Discussion started by: bright_genius
0 Replies
3. Solaris
is it possible to swap the Turbo XGX graphics card in the SS5 to the ULTRA server 1 ? and do they use the same type of RAM ?
Thx. (0 Replies)
Discussion started by: mads-nielsen
0 Replies
4. UNIX for Dummies Questions & Answers
I am on an HP C8000 running B.11.11, I have no idea how to tell what graphics card I have...and the amount of memory it has, driver, etc. Also, how do I tell how much ram the box itself has, and other memory information like swap and processor speed and all that. Any help out there for me? ... (1 Reply)
Discussion started by: satraver
1 Replies
5. Solaris
Hi,
I need to start the Xserver process in a domain of a E25K which has installed Solaris 8, however this domain doesn't have installed a graphic card, is this possible? Or is there any way to emulate this process?
In fact I don't know how to stop or start the Xserver process, is with... (5 Replies)
Discussion started by: wolf8006
5 Replies
6. HP-UX
Hi Gurus,
I'm trying to install Oracle on HP-UX 11.23. The Oracle installer needs an X server running on the box. You then start an X client on your PC, export the DISPLAY on UNIX and the installer displays on your PC. The problem is that my HP boxes do not have graphics cards installed. ... (6 Replies)
Discussion started by: kskywr
6 Replies
7. Solaris
Hi Guys,
Anyone know any commands to verify the graphics card is installed correctly on an M4000?
show-displays just comes back and echoes nothing.
Also there is on input-device or output-device variable when you run printenv.
This in itself is worrying.
Any advice would be... (4 Replies)
Discussion started by: callmebob
4 Replies
8. Ubuntu
I am trying to install this NVIDIA-Linux 64-260.19.04.run graphics card, it is a GeForce GTX460 EVGA. I have tried all the commands to turn off the Xserver yes I can get it off yes I can get to root prompt or sudo prompt in home directory but every time I use the sh NVIDIA-Linux 64-260.19.04.run... (0 Replies)
Discussion started by: jackdevon
0 Replies
9. Red Hat
Hi,
I would like to know how to find out ACTUAL speed of NIC Card.
I have used the command ethtool eth0, it is showing supported modes,
but what is acutal speed ? how to find out? (4 Replies)
Discussion started by: manoj.solaris
4 Replies