11-02-2007
Can I modift it or not??????
So how to make it real console????????
please help........
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
We're running SCO Unix Openserver 5.05 and I'm having trouble with serial communication between the com2 serial port and a handheld device. Downloading data from Unix to the handheld works perfectly, but the other way around creates a major problem. I don't know whether it's a buffer overflow or... (1 Reply)
Discussion started by: Aretha
1 Replies
2. Linux
Hi All,
I am a begineer in Linux, I have 4 ports and 3 are operational port 1,port 2 and port 4 (when I plug in serial device I can see it working) but port 3 seems it is not working.
I am sure the hardware is fine.
when I give command
dmesg | grep tty
I get,
serial 8250:ttyS0 at... (0 Replies)
Discussion started by: vr_82
0 Replies
3. Programming
I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than... (2 Replies)
Discussion started by: raj8109
2 Replies
4. Solaris
Hi,
I am working with solaris 9,SUN-Blade-100 and I want to communicate with the Serial port.To check whether the port is working or not.I write code and when I execute the file,then I got the output--
According to this,serial port is not found.can anyone please tell me how to configure the... (1 Reply)
Discussion started by: smartgupta
1 Replies
5. Programming
Hello!
Can someone advice me which method I will use if I want to communicate with device via RS232 serial port with this requirements:
1. Serial port is opened in non-canonical mode.
2. All the time I need to check is there something to read.
3. If I have to write something I need to write it... (6 Replies)
Discussion started by: jvrlic
6 Replies
6. UNIX for Dummies Questions & Answers
A neighbour's Ubuntu 10.04 machine has five serial ports, one on the motherboard and four on a PCI card. However, only four cards are showing:
# dmesg | grep tty
console enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
... (2 Replies)
Discussion started by: dotancohen
2 Replies
7. Shell Programming and Scripting
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Discussion started by: charlie.arya
0 Replies
8. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
9. Web Development
I am trying to write to a serial port and capture the reponse in a file -
adduser ethan dialout
The user `ethan' is already a member of `dialout'
root@meow:/home/ethan# ls -l /dev/ttyS0
crw-rw-r-- 1 ethan dialout 4, 64 Oct 7 20:55 /dev/ttyS0
$fh1 = fopen("/dev/ttyS0", "w+");... (74 Replies)
Discussion started by: Meow613
74 Replies
10. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
LEARN ABOUT NETBSD
pcweasel
PCWEASEL(4) BSD Kernel Interfaces Manual PCWEASEL(4)
NAME
pcweasel -- Support for the PC-Weasel serial console board
SYNOPSIS
pseudo-device pcweasel
weasel* at pci? dev ? function ?
Note that the appropriate display device must also be enabled. See pcdisplay(4) for more information.
DESCRIPTION
The PC-Weasel is a serial console board for use primarily on Intel-based PC-class systems. It addresses a problem that nearly everyone who
has deployed a PC-class server has experienced: the total lack of remote management capability on PC-class hardware.
In addition to serial console support, the PC-Weasel provides the ability to remotely reset the system (by means of a hardware reset signal),
and provides a watchdog timer function.
The PC-Weasel works by emulating the original IBM Monochrome Display Adapter (MDA). Writes to the display's character cells are translated
into ANSI terminal sequences which are then sent out the PC-Weasel's serial port. Incoming characters are translated into PC keyboard scan
codes and then fed (by means of a cable) into the system's keyboard controller. The system believes it is using a display console. This is
particularly important in the event that one needs access to BIOS configuration menus.
The PC-Weasel also includes a ST16550 serial port, which may be configured as any one of the system's serial ports. Typical usage is to con-
figure the port as com0 at ISA I/O address 0x3f8. When the PC-Weasel detects activity on the ST16550, the serial port is automatically con-
nected to the ST16550 so that the serial port may be used as normal. When the PC-Weasel detects activity on the internal UART used for MDA
emulation, the serial port is automatically reconnected to the emulation UART. This allows the boot program and kernel to be configured to
use the serial port directly (which is more efficient than using the MDA emulation mode), yet allows the MDA emulation to be reestablished as
soon as the kernel loses control of the system.
The pcweasel driver provides support for the additional features present on the PC-Weasel. At the moment, this includes support for the
watchdog timer function. Use of the pcweasel driver is not required in order for the system to function with a PC-Weasel installed so long
as only the MDA emulation and ST16550 serial port functionality is required.
SEE ALSO
pcdisplay(4), wdogctl(8)
HISTORY
The pcweasel driver first appeared in NetBSD 1.5.1.
AUTHORS
The PC-Weasel was invented by Herb Peyerl and Jonathan Levine at Canada Connect Corporation. It is now produced by Middle Digital, Inc.,
http://www.realweasel.com/
The pcweasel driver was written by Jason R. Thorpe <thorpej@zembu.com>, and contributed by Zembu Labs, Inc. Herb Peyerl of Middle Digital,
Inc. provided several firmware updates during the development of the driver.
BSD
November 23, 2007 BSD