|
|
Sponsored Content
Operating Systems
Linux
urgent......Serial port
Post 302143539 by porter on Friday 2nd of November 2007 12:58:34 AM
11-02-2007
|
|
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
We're running SCO Unix Openserver 5.05 and I'm having trouble with serial communication between the com2 serial port and a handheld device. Downloading data from Unix to the handheld works perfectly, but the other way around creates a major problem. I don't know whether it's a buffer overflow or... (1 Reply)
Discussion started by: Aretha
1 Replies
2. Linux
Hi All,
I am a begineer in Linux, I have 4 ports and 3 are operational port 1,port 2 and port 4 (when I plug in serial device I can see it working) but port 3 seems it is not working.
I am sure the hardware is fine.
when I give command
dmesg | grep tty
I get,
serial 8250:ttyS0 at... (0 Replies)
Discussion started by: vr_82
0 Replies
3. Programming
I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than... (2 Replies)
Discussion started by: raj8109
2 Replies
4. Solaris
Hi,
I am working with solaris 9,SUN-Blade-100 and I want to communicate with the Serial port.To check whether the port is working or not.I write code and when I execute the file,then I got the output--
According to this,serial port is not found.can anyone please tell me how to configure the... (1 Reply)
Discussion started by: smartgupta
1 Replies
5. Programming
Hello!
Can someone advice me which method I will use if I want to communicate with device via RS232 serial port with this requirements:
1. Serial port is opened in non-canonical mode.
2. All the time I need to check is there something to read.
3. If I have to write something I need to write it... (6 Replies)
Discussion started by: jvrlic
6 Replies
6. UNIX for Dummies Questions & Answers
A neighbour's Ubuntu 10.04 machine has five serial ports, one on the motherboard and four on a PCI card. However, only four cards are showing:
# dmesg | grep tty
console enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
... (2 Replies)
Discussion started by: dotancohen
2 Replies
7. Shell Programming and Scripting
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Discussion started by: charlie.arya
0 Replies
8. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
9. Web Development
I am trying to write to a serial port and capture the reponse in a file -
adduser ethan dialout
The user `ethan' is already a member of `dialout'
root@meow:/home/ethan# ls -l /dev/ttyS0
crw-rw-r-- 1 ethan dialout 4, 64 Oct 7 20:55 /dev/ttyS0
$fh1 = fopen("/dev/ttyS0", "w+");... (74 Replies)
Discussion started by: Meow613
74 Replies
10. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
LEARN ABOUT DEBIAN
m16c-flash
M16C-FLASH(1) General Commands Manual M16C-FLASH(1) NAME
m16c-flash - Flash programmer for Renesas M16C and R8C microcontrollers SYNOPSIS
m16c-flash [COM_DEV] [CPU_TYPE] [FILE] [ID1:...:ID7] [OPTIONS] DESCRIPTION
m16c-flash is a flash programmer for the Renesas M16C and R8C microcontrollers which operates in asynchronous mode. OPTIONS
COM_DEV The serial device to use for flashing, e.g. /dev/ttyS0 or /dev/ttyUSB0. CPU_TYPE The CPU type you want to flash to (currently M16C or R8C). FILE The filename of the binary you want to flash. ID1:...:ID7 The device ID. --help Show a help text and exit. --version Show version information and exit. EXAMPLES
Flash the simple.s file onto an M16C microcontroller via the first serial port (/dev/ttyS0) using 0:0:0:0:0:0:0 as the device ID: m16c-flash /dev/ttyS0 M16C simple.s 0:0:0:0:0:0:0 Flash the test.mot file onto an R8C microcontroller via the USB serial device /dev/ttyUSB0, and using ff:ff:ff:ff:ff:ff:ff as device ID: m16c-flash /dev/ttyUSB0 R8C test.mot ff:ff:ff:ff:ff:ff:ff BUGS
Please report any bugs to Thomas Fischl <tfischl@gmx.de>. LICENCE
m16c-flash is covered by the GNU General Public License (GPL). AUTHORS
Greg Reynolds <greg@lostintheether.net> Jim Hawkridge <h046@eee-fs4.bham.ac.uk> Thomas Fischl <tfischl@gmx.de> This manual page was written by Uwe Hermann <uwe@hermann-uwe.de>, for the Debian GNU/Linux system (but may be used by others). August 20, 2006 M16C-FLASH(1)