10-28-2007
Thanks for the answer.
I started out with no keyboard entry in the sysidcfg file (and got the same problem) so I tried added the keyboard= but it didnt make any difference. So thats not the problem.
I heard there were some bugs with the NFSv4 domain setting that sounded like the same problem I have now with the keyboard. The solution for that was to remove it from the sysidtools config files under /etc/.sys* (cant remember the exact name of the files)
Have not verfied this yet.
Will give it a try tomorrow.
(Im using a SunFire V210 with serial console and no keyboards attached. Im also using the latest firmwares)
/Peter
9 More Discussions You Might Find Interesting
1. Solaris
I just built a jumpstart server on a Solaris 9 sun box and have had no problems jumpstarting other sol9 boxes using the custom rules. I've also copied a Solaris 10 image onto that same solaris 9 server and have had problems loading Solaris 10. These boxes will go directly to the manual OS install... (5 Replies)
Discussion started by: salty
5 Replies
2. Solaris
Hi all ,
I am trying to jumpstart ( webstart) solaris 9 on E2900 ( client) using the DVD of a V440 server ( jumstart server). I did the setup for the V440 as follows :
cleaning up preexisting install client "XXXXXXX"
removing XXXXXXXfrom bootparams
removing /etc/bootparams, since it is... (14 Replies)
Discussion started by: ppass
14 Replies
3. Solaris
I'm a little stumped here. If anyone has seen this, please point me in the right direction
Little background first:
I maintain a Solaris corporate build, currently based on Solaris 10u4 (08/07). This build is deployed using flars through jumpstart, wanboot, and jumpstart DVD. In the lab, I have... (1 Reply)
Discussion started by: System Shock
1 Replies
4. Solaris
Hello everyone,
I tried to install solaris 10 using the command # boot net - install.
I take the image correctly but when you start installing the Operating system installation takes a long (4 hours I have left and not advancing but not send me any errors), it can be seen from the following:
... (7 Replies)
Discussion started by: yflores
7 Replies
5. Solaris
Hi,
can someone help with the following?
I got 1x146GB disk which is span by just one zfs rpool.
When issue for example:
as you can see in above output the flar is very small, just around 10KB
rpool with all data sets has several GB so this can't be good image. This is on the Solaris 10... (3 Replies)
Discussion started by: TomSu
3 Replies
6. Solaris
I'm new to utilizing Solaris... especially the old 8 version, but I'm trying to find out if there is a way to create a Flash Archive of a disk that can be restored on a smaller size disk or disk of varying size? (2 Replies)
Discussion started by: scifi_vixen
2 Replies
7. Solaris
I have a laptop and need to build an Oracle Linux kickstart server and a Solaris Jumpstart server that can build sparc and x86 systems.
Is the best way to create a dual boot from grub for Oracle Linux and Solaris x86?
Can the Oracle Kickstart be used as a Jumpstart to build both Solaris 10... (2 Replies)
Discussion started by: Gian
2 Replies
8. Solaris
Hi!
I want to migrate Sun Fire v240 server (sun4u) with Solaris 10 update 6 to LDOM virtual host (sun4v). I was mount NFS directory from another server in /mnt and did this steps on v240
1) I add to the /var/sadm/system/admin/.platform
PLATFORM_GROUP=sun4v
# cat... (1 Reply)
Discussion started by: pbubentsov
1 Replies
9. Solaris
I want to migrate a solaris 10 os to solaris 11.4 zone.
I did this
a)Collect some data like id sysid,disks,ip,etc..on solaris10
OK
b)Create this file.cfg with this command on solaris 10
zonep2vchk -c > /migration/sol10.cfg
OK
c)Create the archive flash on Solaris10 (1 Reply)
Discussion started by: Linusolaradm1
1 Replies
LEARN ABOUT SUNOS
root_archive
root_archive(1M) root_archive(1M)
NAME
root_archive - manage bootable miniroot archives
SYNOPSIS
/boot/solaris/bin/root_archive pack archive root
/boot/solaris/bin/root_archive unpack archive root
/boot/solaris/bin/root_archive packmedia solaris_image root
/boot/solaris/bin/root_archive unpackmedia solaris_image root
The root_archive utility is used to manage bootable miniroot archives and is currently only available on platforms. The utility can pack
and unpack boot/root archives in both ufs and hsfs (iso9660) format. It will always generate ufs archives.
root_archive also uses the lofi file driver to export a file as a block device (see lofi(7D)) and mount to mount or unmount file systems
and remote resources (see mount(1M)). root_archive requires the same privileges that are needed to run these commands.
SUBCOMMANDS
The root_archive command has the following subcommands:
pack archive root
Pack from the image found under the root directory to the archive.
unpack archive root
Unpack from the archive to an unpacked image under the root directory.
packmedia solaris_image root
Pack the solaris image to the root directory.
unpackmedia solaris_image root
Unpack the solaris image from the root directory.
For packmedia and unpackmedia, other items that do not go into the ramdisk image are copied or uncopied (see cpio(1)) as well. Specifi-
cally, this includes all the packaging databases needed for pkgadd and the other packaging utilities to succeed which are not used in the
running and hence pruned to conserve memory.
EXAMPLES
Example 1: Unpacking the Solaris x86 install image
The following command unpacks the current Solaris image from the root directory:
# root_archive unpackmedia
/export/nv/solarisdvd.nvx_dvd/latest /export/Boot
Where /export/nv/solarisdvd.nvx_dvd/latest represents a path to a Solaris x86 install image and /export/Boot is a directory that will be
purged or created, as necessary.
Example 2: Packing the Solaris x86 install image
The following command packs the current Solaris image to the root directory:
# root_archive packmedia
/export/nv/solarisdvd.nvx_dvd/latest /export/Boot
The following exit values are returned:
0
The command completed successfully.
1
The command exited due to an error.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Stable |
+-----------------------------+-----------------------------+
cpio(1), bootadm(1M), mount(1M), attributes(5), lofi(7D)
26 Sep 2005 root_archive(1M)