10-27-2007
What do you mean by "hang"? Does the machine crash? freeze completely? freeze only for a longer time? become unresponsive? slows down?
What does the errpt say?
The ctrmc subsystem is one of the leftovers PSSP, the middleware of the (*sigh*, those were the times) SP/2. It will be necessary for CSM, HACMP or if the machine is connected to a HMC. If this is not the case you could remove it by "rmcctrl" but consult the manpages of rmcctrl first!
If you want to configure the RMC it is done by the command csmconfig, but read
this link (Understanding RMC and resource managers) first. There is a configuration file (/var/ct/cfg/ctrmc.acls) you could have look at and a command (chrmcacl) to modify that file.
I hope this helps.
bakunin
10 More Discussions You Might Find Interesting
1. Shell Programming and Scripting
Hi All,
I tried searching for this, but I have yet to find anything useful. So here goes,
if a script executed from another script with nohup & hangs, does it affect the parent script? Reason I ask, we have a windows box with NFS, and we use it to store some of our files. Currently, I mount the... (2 Replies)
Discussion started by: Sully
2 Replies
2. AIX
I've got an RS6K B50, and i've installed AIX 5.3, TL5. It installs fine, the only customisations i make to the BOS are to change the locale / keyboard layout to UK, and to choose not to install graphical software.
I have no video card in this box, and i connect via a serial console (null modem... (4 Replies)
Discussion started by: craigp84
4 Replies
3. Solaris
Hi all,
I have a SUN server Sun-Fire-V890 running solaris 9, with a remote system console .
Both the IP adresses of the server and the console are in a private network (address 10.67.xxx).
For some reasons I need to give the access to the server from outside address 194.xxx, but I prefer that... (2 Replies)
Discussion started by: aribault
2 Replies
4. AIX
Hi guys,
Got a tiny bit of a problem on one of our servers here at work. I installed AIX 5.3 on the server and that went fine. Then I upgraded to ML 5300-05-01, but now the system just hangs on boot.
The system starts up and the monitor comes on in few minutes, but a few seconds later when... (6 Replies)
Discussion started by: drchris
6 Replies
5. AIX
Good afternoon,
I'm currently working on an IBM 9110-510, with an AIX 6.1 on it.
Currently, I've put an HyperTerminal on the machine vty0. Folowing the procedure given by a support guy(§details), I'm able to get to the AIX banner
... (6 Replies)
Discussion started by: nilleb
6 Replies
6. Ubuntu
Boot process hangs after reaching the following line:
Adding 5853176k swap on /dev/mapper/mch-swap_1. Priority:-1 extents:1 across:5853176kUsing knoppix 6.2 as LiveCD, and mounting the partitions, I got the following:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s... (0 Replies)
Discussion started by: fzaker
0 Replies
7. AIX
We are having a bit of trouble finding where the following process is being started from at bootup.
/opt/IBM/tdsV6.2db2/itma/aix526/ud/bin/kuddb2 db2tdsWe have looked in the typical areas /etc/inittab & /etc/rc.d but have had no luck finding it, any ideas? (10 Replies)
Discussion started by: j_aix
10 Replies
8. AIX
Hi all,
We have a old Power4 server with AIX version 5.3 installed. Upon boot up, it hangs right after the AIX welcome screen. On the diagnostic load progress LED indicator, I saw that it stopped at '0c32' then after awhile the LED would be blank. The screen on the monitor will hang at the black... (15 Replies)
Discussion started by: a_sim
15 Replies
9. Solaris
Hi Guys,
I have a SunBlade 1500 which I use to practice at home. Suddenly when I power on the server it just displays the solaris banner and Boot device: disk File and args: Then it stops and says " rebooting with command: boot"
It doesn't boot to the kernel. Is there anyway I can possibly... (5 Replies)
Discussion started by: cjashu
5 Replies
10. Solaris
Power server up runs through diagnostics.
Goes to the boot section and then the bit where the cursor is spinning and thats it. Hangs completely.
Any ideas? (10 Replies)
Discussion started by: psychocandy
10 Replies
LEARN ABOUT FREEBSD
boot.config
BOOT.CONFIG(5) BSD File Formats Manual BOOT.CONFIG(5)
NAME
boot.config -- Configuration file for the boot blocks
DESCRIPTION
The boot.config file contains options for the FreeBSD boot block code.
When the FreeBSD boot loader runs, it searches the ``a'' slice of the boot partition for a boot.config file (as a result, slices which are
missing an ``a'' partition require user intervention during the boot process). If the boot.config file is found, its contents are used as
the default configuration options for the boot block code and are echoed to the system console.
A valid format of this file is to put BIOS drive number, a controller type, a unit number, a partition, a kernel file name, and any other
valid boot(8) option on a single line, as it is done at the ``boot:'' prompt.
The options related to the boot image selection described below and all the other options available for boot.config are documented in detail
in the boot(8) manual page.
FILES
/boot.config parameters for the boot blocks (optional)
EXAMPLES
The command:
# echo "-P" > /boot.config
will activate the serial console of FreeBSD.
The command:
# echo "1:ad(1,a)/boot/loader" > /boot.config
will instruct the second stage of boot(8) on the first disk to boot with the third boot(8) stage from the second disk.
The command:
# echo "1:ad(1,a)/boot/loader -P" > /boot.config
will do both of the above.
SEE ALSO
boot(8), loader(8)
AUTHORS
This manual page was written by Daniel Gerzo <danger@FreeBSD.org>.
BSD
May 13, 2007 BSD