10-04-2007
Linux and Dell 1500sc Poweredge Server
Does anybody no how to get around the fact that the Red Hat installation does not see the SCSI hard drives. It lets you manually pick the proper device, but still fails saying no drive detected (or something to that effect). I was going to install windows 2003 Server and use VMware...but again, same problem. Even when using a floppy to install proper driver for Aic-7899 controller. Thanks
8 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
I'm trying to load SCO Unix 5.0.2 on a Dell 1500SC server, without any success. First off, yes I know that 5.0.2 is an outdated version, and is not supported anymore, but that is what my company has directed me to do. The problem with the load appears to be the new chipset on the server,... (1 Reply)
Discussion started by: Howeird
1 Replies
2. Linux Benchmarks
Notes:
System Configuration: Dell Computer Corporation PowerEdge 4600 (4 X Intel(R) XEON(TM) CPU 2.00GHz
1988.782 MHz) hyperthreaded
System clock frequency: 99.0827 MHz
Memory size (approximate): 2559 Megabytes
========================= CPUs ========================
CPU # CPU... (0 Replies)
Discussion started by: tnorth
0 Replies
3. Linux Benchmarks
CPU/Speed: Dual PIII 533
Ram: 256Mb PC133
Motherboard: Unknown, Intel Chipset
Cache: 256k on board
Controller: PARC Raid 2/Si, AIC-7880U
Disk: 30Gb RAID 5
Load: 1 user. Clean boot, init 5 but X-Windows not loaded.
Kernel: See Benchmarks.
pgms: gcc 3.2.3
... (2 Replies)
Discussion started by: Garp
2 Replies
4. Solaris
hi, i am trying to install solaris 10 (on 4 cd's downloaded from the sun website) on my dell poweredge 2800 server. 2 xeon processors, 2GB of RAM and 2 NICS, 73 GB SCSI (maxtor ultra320, 3.5 series), i can give more details on request...
the installation crashes when trying to detect the NICS... (0 Replies)
Discussion started by: xinugeek
0 Replies
5. UNIX for Dummies Questions & Answers
I have 2 Dell Poweredge 1950 servers running . I have been having intermittent performance issues with the NIC cards on one of them. The two servers are identical and are running the same operating system. The server that has the issue is on the DMZ on a a static IP and is hosting a website. ... (0 Replies)
Discussion started by: skotapal
0 Replies
6. SCO
Hello all,
I'am experiencing weird relyability problems with a SCO 6.0 Openserver server that runs on a Dell Poweredge 1800 equipped with a PERC DC4 raid controller and 4 36 GB 15 K rpm hot swappable scsi harddisks.
It runs a RAID 10 configuration.
It uses the mega hba, Revision 8.03a Release... (1 Reply)
Discussion started by: frederik1
1 Replies
7. Programming
Hi,
I have a C++ program to access /dev/mem and retrieve details like Vendor, Manufacturer details of the motherboard. This works fine on all the machines except for on Dell Poweredge 2850,1950... machines.
I receive a 'EFAULT' when I try to access /dev/mem on these servers.
I suspect some... (1 Reply)
Discussion started by: ragisreekanth
1 Replies
8. SCO
I was asked to get a Dell PowerEdge 2600 server, out of warranty, running SCO 3.2v5.06 to perform a full backup. I spent hours researching and preparing a strategy only to fail on-site.
The only device names in /dev for a tape drive were
/dev/xStp0
/dev/xcdt0
/dev/xct0
... (6 Replies)
Discussion started by: ezlarry
6 Replies
AIC(4) BSD/i386 Kernel Interfaces Manual AIC(4)
NAME
aic -- Adaptec AIC-6260 and AIC-6360 SCSI driver
SYNOPSIS
device aic
In /boot/device.hints:
hint.aic.0.at="isa"
DESCRIPTION
The aic driver provides support for the Adaptec AIC-6260 and AIC-6360 SCSI controller chips. Many systems that use these controller chips do
not have a boot ROM and therefore cannot be booted from.
HARDWARE
The adapters supported by the aic driver include:
o Adaptec AHA-1505 (ISA)
o Adaptec AHA-1510A, AHA-1510B (ISA)
o Adaptec AHA-1520A, AHA-1520B (ISA)
o Adaptec AHA-1522A, AHA-1522B (ISA)
o Adaptec AHA-1535 (ISA)
o Creative Labs SoundBlaster SCSI host adapter (ISA)
o Adaptec AHA-1460, AHA-1460B, AHA-1460C, AHA-1460D (PC Card)
o Adaptec AHA-1030B, AHA-1030P (PC98)
o NEC PC-9801-100 (PC98)
SEE ALSO
aha(4), ahb(4), ahc(4), cd(4), ch(4), da(4), intro(4), sa(4)
BUGS
The driver does not work well with multiple devices on the SCSI bus. The driver works well with devices like CDROMs and Tape drives. The
driver works not so well with disk drives. The PC Card version appears to work better than the ISA version, but that may be due to differing
levels of testing of the devices.
BSD November 8, 2003 BSD